Decision Buy Hunter 380 Pro Pro NDNDM This vessel represents a trade-off between ease of transportation and comfort of plane, making it one of the leaders in the inflatable PVC boat segment. The low-pressure inflatable floor design (LDPB) dramatically changes the experience of being on the water, ensuring gentleness of the ride even in the presence of a small wave.
Unlike hard solders, there is no need to spend time assembling the floor and installing stringers, which is especially valuable when traveling often. However, before making a purchase, you need to clearly understand the specifics of the operation of such structures, since they require more careful handling of the bottom when pulling on the shore. Hunter 380.
Design features of the model 380 Pro
The basis of reliability of this model lies in the use of high-strength five-layer reinforced PVC, which is resistant to ultraviolet, fuel and mechanical damage. The cylinders have a complex geometry, which provides excellent germination on the wave and stability of the course. inflatable floor It is made using AirDeck technology, creating a hard surface comparable to plywood, but with much less weight.
The Pro is usually different from the base version by having a reinforced keel that runs along the bottom, which not only improves hydrodynamics, but also provides additional protection against impacts on underwater obstacles. In the bow there is an inflatable bushprit that increases the usable area of the cockpit and allows you to meet the wave more confidently.
An important element of the design is a system of three inflatable tubes separated by bulkheads with pressure vent valves, a critical safety feature: when overheated in the sun or hit by a wave, the excess pressure is automatically ejected, preventing the joints from rupturing. Hunter 380 Pro It is designed to remain buoyant even if one of the compartments is damaged.
⚠️ Attention: Despite the strength of the material, you should not drag a fully inflated boat on hard ground or rocky bottom. The inflatable floor is vulnerable to sharp objects, unlike aluminum or plywood counterparts.
Technical nuances of cylinders
Inside the cylinders are special tape-limiters that do not allow them to inflate in diameter more than the intended, maintaining the specified shape and rigidity of the structure.
inflatable floor benefits (BBB)
The main argument in favour of Buy Hunter 380 NDPH It's an incredible convenience to build, and you don't have to bend your back by putting heavy sleighs in and hammering thongs, and it takes minutes to get ready to go down, just pump the cylinders and the bottom up to the working pressure.
Comfort on the water is the second key factor: the inflatable floor acts as a shock absorber, extinguishing the impacts on the oncoming wave. This is especially true for anglers who spend 6-8 hours in a boat, and their back and legs get tired much less than when they are on a hard plywood floor vibrating from the engine.
- 🚀 Instant readiness for descent: assembly takes 5-10 minutes against 20-30 minutes for mutual models.
- 🛡️ High safety: the absence of rigid elements in the design reduces the risk of injury in abrupt stop or roll.
- 📦 Compact folded: soft bottom allows you to pack the boat in a denser backpack, which is convenient for storage in the trunk of a passenger car.
However, it is worth considering that the rigidity of the inflatable floor is still inferior to aluminum. When you install a heavy motor and fully load people and equipment, the bottom can be slightly bent, which requires the correct tuning of the transom.
Transportability and weight specifications
One of the reasons for the popularity of the model Hunter 380 The total weight of the boat with hinged elements usually does not exceed 45-50 kg, which allows it to be transported in the trunk of most wagons or even hatchbacks with the rear seats folded down.
For ease of carrying, the manufacturer has equipped the cylinders with four comfortable handles, which allows two adults to carry the assembled boat on their shoulders without much discomfort, which is important when descending from steep banks or overgrown areas. The weight of the boat itself in the basic configuration is about 38-40 kg, which is an excellent indicator for a three-meter design.
It is important to remember the weight distribution when loading into the car. The heavy motor and battery are better placed closer to the center of gravity of the car or on the rear axle, so as not to overload the front suspension. Transportability This model is its trump card, but it requires a reasonable approach to logistics equipment.
⚠️ Warning: When transporting in hot weather, be sure to blow some of the air out of the cylinders before long parking in the sun. The pressure inside rises proportionally to the temperature and can damage the seams.
Use special hair covers to drag the boat on the sand or grass. This will save strength and protect the PVC fabric from abrasion on small pebbles.
Motor choice and speed performance
For a 3.8-meter long boat with two passengers and equipment on board, the optimal power range is 9.9 to 15 horsepower. Two-stroke engines are preferred because of the lower weight, which shifts the center of gravity and improves germination on the wave. With a 15 hp engine. Hunter 380 Pro It is capable of speeds up to 30-35 km / h.
When choosing a motor, you should pay attention to the length of the daydwoot. inflatable floor boats often require a longer lower unit or a fitting for an outboard motor so that the screw does not hit the soft bottom when rolling. transattraction It is critical for planing and fuel economy.
If you plan to use the boat mainly for trolling or quiet fishing with one person, you can consider options for electric motors with a capacity of 30-40 lbs. They will provide silent movement and no odor of fuel, which is appreciated when fishing carefully.
| Engine power | Max. speed (1 person) | Max. speed (2 people) | Fuel consumption (average) |
|---|---|---|---|
| 9.9 hp | 22-24 km/h | 18-20 km/h | 2.5 l/hour |
| 15 hp | 32-35 km/h | 28-30 km/h | 3.5 l/hour |
| 18 hp | 36-38 km/h | 32-34 km/h | 4.5 l/hour |
| 20 hp | 38-40 km/h | 34-36 km/h | 5.0 l/hour |
It is worth noting that installing an engine that is too powerful (more than 20 hp) on this model is not advisable: the body is not designed for high speed loads, and fuel consumption increases disproportionately to the increase in speed. Optimal balance It is in the middle of the recommended range of capacity.
For a boat 380 cm with NDND "golden mean" is a two-stroke engine 15 hp with a long ddwut.
Package and additional options
When buying, it is important to carefully consider what exactly is included in the basic package. Often advertised price refers to the "naked" case, without seats, bags and a pump. Standard equipment usually includes the boat itself, a hinged transom, two inflatable seats (seats-banks), a remake and a bag-pack.
Among the useful options to consider when ordering, there are stationary inflatable seats with backrests, which are attached to special leers or huts and provide much more comfort than rigid cans, and anchor ducks and spinning holders integrated into the design of cylinders are also popular.
- 🎒 Backpack bag: check for a reinforced bottom and water-repellent impregnation of the bag fabric.
- ⚓ Anchor rim: the presence of nasal and aft bolts facilitates mooring and anchoring.
- 🔧 Remake: make sure that the set has not only patches, but also a special glue for PVC.
Some dealers offer additional levers to mount an awning or sonar, which enhance the functionality of the boat, turning it into a full-fledged fishing boat for the weekend. Hunter 380 It has a great potential for tuning.
☑️ Pre-purchase check
Where to buy and what to pay attention to
Buying a boat is a long-term investment, so it is important to choose a proven seller. Official dealers provide a warranty from the manufacturer, usually between 1 and 3 years. When buying from hand or on dubious sites, there is a high risk of buying a defective product or model with an expired shelf life of PVC materials.
When inspecting a boat in a store or when you receive goods, pay attention to the quality of the adhesive seams. There should be no bloating, non-progly or protruding reinforcement threads. The valves should open and close with a clear click, and the threads should not be broken. Assemblance quality It directly affects the life of the product.
It is also worth checking the availability of spare parts and remixes from the seller. In the case of a puncture or valve damage in the high season, the ability to quickly get a replacement will be critical.
⚠️ Warning: Avoid buying boats that have been stored in an open warehouse for a long time in direct sunlight.
Seasonal buying
The best time to buy a boat is in late autumn or winter, when discounts are in effect on last year's collections. In summer, prices are maximum, and the range can be limited.
Care and storage for long service
To the boat Hunter 380 Pro It's been in the boat for decades, and you have to follow simple rules of care, and after every fishing trip, especially in salt water or muddy rivers, you have to rinse the boat with fresh water, and that will wash away the abrasive particles and salts that can damage the fabric when you dry.
Store the boat in a dry, ventilated room at a temperature of -20 to +40 degrees. Before packing in a bag, the boat should be completely dry. The wet cloth in the closed state will quickly be covered with mold, which destroys the reinforcing layer and causes an unpleasant odor.
Periodically, at least once a season, check the pressure in the cylinders and the condition of the valves. Lubricate the movable parts of the valves with silicone lubrication so that they do not sour. Proper care is the guarantee that you do not have to look for a new boat in a couple of seasons.
FAQ: Frequently asked questions
Can you use Hunter 380 at sea?
Marine use is only possible in coastal areas and in calm weather. PVC material is resistant to salt water, but open sea wave and rocky bottom pose a high risk to the inflatable floor.
How long do the stitches dry when glued?
With two-part polyurethane adhesive, full polymerization takes 24 hours at +20°C. However, you can operate a boat with a minimum load after 12 hours.
Do I need to register a boat with GIMS?
According to the current rules of the Russian Federation, boats weighing less than 200 kg and with an engine power of less than 8 kW (10.88 hp) are not subject to registration. Hunter 380 It weighs about 40-45 kg, with a motor up to 10 hp registration is not required. When installing a motor 15 hp and above registration is mandatory.
How do you fix the inflatable floor punctures?
The repairs are made with PVC remixes that are made up of pieces of fabric and glue, and you can't use cyanacrylate-based superglues or glues because they make the material tough and brittle, just elastic polyurethane compounds.
What is the maximum number of people on board?
The passenger capacity of the 380 Pro is usually 3-4 people, but it is most comfortable for two adults with a full set of equipment.