Choosing a swimmer for serious fishing or a family holiday on the water often comes down to finding the perfect balance between capacity, load capacity and transportability. Compass 380 NDN It has proven to be one of the most sustainable options on the market today, with a low-pressure inflatable floor offering a unique combination of comfort and performance that is not available to classic air deck-type plywood or inflatable floors.
Unlike the lighter versions, the 380-length version is designed for those who plan to go out into the water not only calm, but also in the presence of a moderate wave. The design of the hull allows you to feel confident both in reeds when hunting for ducks and in the open waters of the reservoir. PVC material The high density used in manufacturing ensures durability even under heavy operation in difficult conditions.
In this article, we will discuss in detail the technical nuances of this model, evaluate the real driving performance with different engines and discuss the features of operation. NDNDM It is becoming the number one choice for many water engines, and what hidden advantages the geometry of cylinders hides. Compass 380.
Structural features and materials of the body
The basis of reliability of any inflatable boat is the quality of the materials used. Compass 380 NDLD The manufacturer uses reinforced polyvinyl chloride density of 1100 g / sq.m. This is not just a marketing figure, but a real indicator of resistance to puncture, abrasion of sand and ultraviolet radiation. The seams are made by hot welding, which eliminates the possibility of tissue stratification even under extreme bending loads.
The key element of the design is a low-pressure inflatable floor, unlike hard floorboard. NDNDM It's a single inflatable structure that becomes as rigid as plywood when pumped, but retains its shock-absorbing properties, which allows you to extinguish the shocks against the wave, making the stroke softer and reducing the load on the angler's spine during prolonged parking.
The boat's cylinders are divided into several independent compartments, which ensures that the boat is not separated. buoyancyEven if one of the cylinders is damaged, the boat will stay afloat and make it safely to shore, and it's important to note that the bow geometry is designed to effectively dissect the wave, minimizing cockpit splashing.
⚠️ Attention: When pumping the NDND floor, strictly monitor the gauge readings. Pumping in hot weather can lead to rupture of the seams, and under-pumping - to deformation of the body and loss of driving performance.
The system of beams that are attached to the boat is particularly noteworthy, and they run around the perimeter of the boat, protecting the sides from impacts on the pier, rocks or the sides of other boats. Compass 380 a reinforced hinge beam is used, which also performs the function of a break when mooring.
Suture production technology
The seams in the Compass boats are made on automated CNC machines, which ensure perfect geometry and no human error. Welding temperature is controlled to an accuracy of a degree, creating a monolithic bond stronger than the fabric itself.
Driving qualities and behavior on the water
The behavior of the boat on the water directly depends on the shape of the cylinders and the hardness of the bottom. Compass 380 NDLD It shows a great germination of glides with even one passenger on board, and the wide and flat aft part promotes rapid detachment from water, which is critical for fuel economy when using low-power engines.
When moving against the wave, the boat behaves predictably. floor-floor It allows you to avoid falling into the pits, and the soft design cushions the impacts, but it is worth remembering that the length of 3.8 meters imposes certain limitations: on a steep wave, the boat can begin to "scour" requiring the steering constant control of the course.
The maneuverability of the model is assessed as high. Thanks to the relatively narrow cockpit and balanced shape of the cylinders, the boat easily turns 360 degrees even with minimal thrust, which is especially appreciated by anglers when trolling or when you need to accurately position at the fishing point.
The important thing is that you can keep your course, and when you're going to have a 9.9 hp engine, the boat is confidently steering straight, even in side winds. 5 hp engine.In windy weather, difficulties may arise with the course retention, and the boat will be demolished.
Capacity and ergonomics of the cockpit
The interior of the boat Compass 380 It's designed to accommodate two or three adults with a full suite of gear, and the cockpit's workspace allows you to move around freely, to kneel to handle gear, and to place fishing boxes or sonars.
The banks (seats) in the basic configuration are usually made of moisture-resistant plywood with soft linings. pocket-holder Or the lyctroses, which allow them to adjust their position along the cockpit, and for trolling, the cans are often removed or shifted to the sides, freeing the center part.
Ergonomics is also designed to accommodate additional equipment. mount for the legs of a rower or passenger, which increases comfort during long transitions, the boards are high enough to eliminate the risk of falling overboard even in pitching conditions.
- 🛶 Possibility of installation transom without losing any useful space.
- 🎣 The presence of convenient handles for carrying around the perimeter, which facilitates descent into the water.
- 📦 Dimensions in packaged form allow you to place bags in the trunk of an average sedan.
☑️ Checking before getting on the water
Compatibility with outboard motors
Choosing a motor for Compass 380 NDLD The manufacturer recommends a power range of 9.9 to 15 hp, and it is in this range that the boat reaches its potential, going into planing at full load.
With a 9.9 hp engine (often a 20-cc engine with a limiter), the boat accelerates to 25-28 km/h with one driver. This is a comfortable cruising speed for moving to the fishing point. Installing a 15-horsepower engine increases the speed to 32-35 km/h, but fuel consumption also increases.
Electric motors are great for quiet fishing, the boat's traverse is reinforced and can withstand the weight of electric traction and battery, but you should note that with an electric motor, the boat will not get on plane and will move in displacement mode at a speed of 5-7 km / h.
| Motor type | Power (hp) | Speed (km/h)* | Fuel consumption |
|---|---|---|---|
| two-stroke outboard motor | 9.9 | 26 | ~3.5 l/h |
| two-stroke outboard motor | 15 | 33 | ~5.0 l/hour |
| four-stroke outboard motor | 9.9 | 25 | ~2.5 l/h |
| Electric motor | 55 lb | 6 | 15 A/hour |
* Speed is indicated for loading 1 person + 20 kg of cargo.
⚠️ Warning: Do not exceed the maximum recommended power of the motor. Installing the engine 20 hp and above on the boat Compass 380 can lead to the destruction of the transom and loss of control at high speed.
Transportability and storage
One of the main advantages of the model Compass 380 It's compact, folded, and despite its impressive size, it's packed tightly enough into a bag, and it's about 50 to 55 kilograms in weight (with motor and cans), which allows you to transport a boat to one person, although it's more convenient to do it together.
The storage of the boat requires compliance with the temperature regime. PVC He does not like extreme frosts, so in winter the boat is better stored in a heated room or garage, and in summer you should avoid prolonged exposure to the scorching sun unnecessarily, as this accelerates the aging of plasticizers in the fabric.
For convenient transportation on the roof of the car, many owners use special soft kofars or hard boxes. It is important to securely fix the cargo to avoid shifting the center of gravity and damage to the packaging against wind currents.
When packing a boat in winter, do not fold it immediately after skidding from the cold into the heat. Let it lie in the garage or corridor for 2-3 hours so that the material warms up and becomes elastic, otherwise microcracks may appear on the folds.
Tuning and refinement
Basic equipment of the boat Compass 380 NDLD It's functional, but for serious fishing, it often requires some work. string It gives the bottom an extra stiffness and arched shape, improving driving performance.
The second important element is the installation of a railing fence around the perimeter of the cockpit, which not only improves safety by preventing things from falling overboard, but also gives a point of support when standing up. pockets for the tackle on the inside of the cylinders.
To protect the bottom from abrasion when pulling on a gentle shore, many people put protective tapes of the same PVC or install removable skegs, which is especially true if you often moor to rocky or sandy beaches.
- 🔧 Installation console with windshield for comfortable driving.
- 🔦 Installation of LED tape around the perimeter of the cockpit for night fishing.
- ⚓ Organization of a kunduk in the nose for storing anchors and falters.
Competent tuning of the boat Compass 380 can turn it from a simple rowing vessel into a full-fledged fishing boat, not inferior in functionality to factory models (FRP).
Frequently Asked Questions (FAQ)
Is it possible to go to sea on the boat Compass 380?
Yes, the boat is suitable for coastal sea navigation in calm weather. PVC It is sensitive to salt water, so after each exit, you need to thoroughly wash the boat with fresh water to avoid corrosion of fittings and destruction of seams.
Which glue is best for puncture repair?
For repairs. reinforced PVC It is best to use two-component polyurethane adhesives (e.g. Texacol or specialized adhesives from the boat manufacturer) that provide a monolithic bond that is as strong as the material itself.
How many people are comfortably accommodated in the 380?
The optimal load is 2 adults. Three people fit, but it's either survival mode or very short transition, because the free space for maneuvering tackles will almost disappear.
Do I need to dry the boat before packing?
Packing a wet boat causes mold, bad smell and decay of fabric, and if you can't dry it, you have to open the boat at home and let it dry completely.
What is the main difference between the NDNDD and the solder boat?
The main difference is in the comfort and speed of assembly. NDNDM It's going to be faster (no need to put in sheets of plywood), softer on the go, and takes up less space in the trunk. The solder boat is tougher on plane at high speed, but it's going to be longer and heavier.