Choosing a boat for fishing is always a compromise between cost, load capacity and comfort on the water. Las Fishraft It often pops up in discussions on fishing forums as an affordable alternative to expensive brands, and potential buyers look for information not just in advertising booklets, but in real ones. feedbackIt is the practical experience of operation that allows us to understand how the declared specifications correspond to reality in the harsh conditions of Russian water bodies.
Many anglers are drawn to this model because of its versatility: it is suitable for both quiet fishing on lakes and for entering small rivers with moderate currents. However, the low price often raises questions about the durability of materials and the quality of the assembly. In this article, we will analyze the design features, analyze the real user experience and find out whether to save money by choosing a choice of materials. Las Fischraft for their fishing trips.
It is worth noting that the opinion of the community is divided: some praise the boat for its passability and spaciousness, others criticize for the nuances of ergonomics. Objective analysis It will help you to put the whole picture together and make an informed decision about your purchase, avoiding common novice mistakes when choosing a first or additional vessel.
Structural features and materials of the body
The basis of any inflatable boat is the material from which its cylinder is made. Las Fishraft The manufacturer most often uses reinforced PVC density of 850-900 g / m2. This is a standard indicator for boats of the middle price segment, which provides a balance between weight and strength. Reinforced fabric It consists of several layers: polyester filament enclosed between layers of polyvinyl chloride, which gives resistance to puncture and abrasion.
Depending on the modification, the boat can be equipped with a low-pressure inflatable floor (LDPB) or plywood sleigh. NDMA It's much easier to transport, because it allows you to put the boat in a compact backpack, but loses in the hardness of the ride on the wave. The plywood floor, in turn, provides excellent stability and the ability to install a full-fledged rig. cross-engineIt increases the weight and size of the assembled form.
⚠️ Attention: When operating a boat with an inflatable floor of NDNDM, strictly monitor the pressure in the cylinders. Insufficient pressure can lead to deformation of the hull and loss of driving performance, and excessive pressure can lead to rupture of the seams when heated in the sun.
The seams on quality specimens are made in a latent (hot) way, which makes them sealed and durable. sticker In budget lots, so visual inspection of the connection of the cylinders and transom before the first pumping is mandatory. Tran, as a rule, is made of water-resistant plywood and is lined with plastic or painted with enamel to protect against moisture.
Real reviews about driving performance and sustainability
Driving is what you feel as soon as you push off the coast. boat reviews Las FischraftThe wide cylinder and the well-thought-out geometry make it possible to feel confident even when moving on the cockpit, which is critical for fishing in a standstill when you need to change position often or get up to throw the spinning.
When the engine is installed, the boat exhibits a class-specific behavior, with low-power engines (up to 5 hp), it easily glides with one passenger. sink-board It must be installed correctly to avoid burying your nose in the wave. Many anglers recommend not overloading the vessel, sticking to a rated carrying capacity with a margin of 10-15% for comfort.
- 🎣 Excellent stability in calm water allows you to fish even together without rolling.
- 🌊 On a short wave, the boat behaves softly, extinguishing the blows thanks to inflatable tubes.
- ⚓ The anchoring is normal, but due to the sailing of high cylinders in the wind can be demolished.
The important aspect is handling. Due to the symmetrical shape of the bow, the boat holds its course well, but in strong side winds it can require constant operation with oars or gas. kylsonIf it is provided by the design of a particular model, it significantly improves the exchange rate stability, but in the basic versions it may not be, which should be considered when planning long-distance transitions.
To improve the performance and protection of the bottom from reeds and shells, experienced fishermen advise using a special protective tape or carpet-skating rug, gluing them to the outer part of the cylinders and bottom.
Comfort and ergonomics during fishing
Fishing is often a long wait, so the comfort of being in a boat comes to the fore. Las Fishraft The developers have tried to address the basic needs of the fisherman: the presence of hinges around the perimeter allows you to conveniently place your hands and attach additional equipment. Soft linings on cylinders in places of rowing or foot rest significantly reduce fatigue.
The interior space of the cockpit allows you to accommodate two people with the necessary equipment, although the three will be already a little cramped, especially taking into account the engine and anchor system. Ergonomics of planting It depends on the height of the balloon: it is high enough to give a good view, but can make it difficult to go ashore in tall shoes if there is no comfortable ladder or help.
The boat has a mounting system that deserves special attention, and it has liner cables and rings to anchor, sonar or cage, but some users have noted that the location of the boat is not a problem. D-ring Sometimes it is not the most convenient for the installation of hinged transes or holders of rods, requiring additional refinement or the use of adapters.
⚠️ Warning: Do not place sharp fishing gear (hooks, glitters, knives) directly on inflatable tubes. Use special organizers or hard cases to avoid accidental puncture during pitching.
☑️ Checking comfort before buying
Comparative table of specifications of popular modifications
To better navigate the model range, it is worth considering the technical parameters of different versions. The differences may relate not only to the length, but also to the design of the floor, the number of inflatable compartments and the maximum engine power.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | Weight (kg) |
|---|---|---|---|---|
| Las Fishraft 220 | 220 | 115 | 250 | 22 |
| Las Fishraft 260 | 260 | 125 | 350 | 28 |
| Las Fishraft 290 NDLD | 290 | 130 | 400 | 34 |
| Las Fishraft 320 Slate | 320 | 140 | 500 | 42 |
Analyzing the table, you can see a direct relationship: an increase in length not only adds space, but also significantly increases the value of the table. loading capacityModels with an index of 290 and above already allow you to confidently use engines with a capacity of 5-8 hp, turning the boat from a rowing boat into a full-fledged motorized vessel for trolling or fast movement around the waters.
The Secret to PVC Durability
The life of a boat can be extended by 2-3 times if after each fishing, it is washed with fresh water and dried in the shade, UV rays and salt are the main enemies of polyvinyl chloride, destroying its structure and making the material brittle.
Operational problems and typical malfunctions
Like any technique, Las Fischraft It's not without its flaws, which owners tell you honestly, and one of the common problems is the quality of the accessories in the first batches of production, plastic valves can have a backlash, and bags-packs - not strong enough lightning, but the manufacturer usually responds quickly to such comments, improving the equipment in new series.
In the cold season, PVC blubbers, becoming less elastic, and this requires special care when assembly and disassembly: mechanical It is recommended to let the boat warm up in a warm room or in the sun before pumping if you fish in the off-season.
- 🔧 It may be difficult to find original remixes for specific valves of old models.
- 🌡️ In strong sun, the pressure in the cylinders increases, requiring periodic air etching.
- 🧵 In places of active work, the protective layer can be erased over time, requiring the installation of protective patches.
Another nuance that experienced users point to is the smell: a new boat can have a specific chemical smell that weathers out after a few days of active operation in the fresh air, which is normal for PVC products and is not a sign of defective unless the smell is accompanied by surface stickiness.
Timely prevention and proper care of the boat Las Fischraft can extend its service life to 10 years or more, turning a budget purchase into a reliable assistant for many years.
Tips for the care and storage of the boat
So, Las Fishraft And you've been blessed with stability and tightness season after season, and you have to follow simple rules of operation, and the rule is, never keep the boat deflated for long periods of time, especially when folded, and this leads to cloth cloth chopping and the destruction of the internal reinforcement layer.
After every fishing trip, especially in salt water or in mud-covered areas, the boat must be thoroughly washed with fresh water and wiped dry. polymerDrying is best done in the penumbra, avoiding direct sunlight, which can unevenly warm the cylinders.
The correct stacking algorithm:1. to completely flush air through open valves.
2. wipe the cylinders with dry rags.
3. to fold the boat, avoiding sharp creases in the same places.
4. Place in a breathing bag (not in polyethylene!).
5. Store in a dry room at a temperature of -20 to +40 ° C.
Regularly checking the pressure in the compartments before getting on the water will help to identify slow leaks that may not be visible. Use a soap solution to look for air bubbles in the area of valves and seams. If you find damage, do not delay repairs: use kit At an early stage, it will prevent the growth of the cut.
⚠️ Note: It is strictly forbidden to use acetone-based adhesives or other aggressive solvents not intended for PVC to repair a Las Fischraft boat, which can melt the material and make the boat unfit for recovery.
Frequently Asked Questions (FAQ)
Can I install an electric motor on a Las Fischraft boat?
Yes, most models with lengths of 260 cm and above have a reinforced transom, which allows you to install electric motors with a capacity of up to 1 hp (about 15-20 kg of thrust).
Which pump is best used for pumping?
For initial pumping, it is convenient to use a high-performance foot or electric pump, and for final pressure relief (up to 0.25 atm), a high-pressure hand pump, which will prevent the pump from overheating and allow for precise control of parameters.
How safe is the boat when overturning?
With several independent inflatable compartments, the Las Fischraft remains buoyant even if one of the cylinders is damaged, and is designed to be extremely difficult to flip, and if it overturns, it can easily return to its working position.
Is there a guarantee for the stitches and material?
The manufacturer usually provides a 12 to 24-month warranty for leakproof seams and no manufacturing defects in the material, but the warranty does not cover mechanical damages sustained during operation (punctures, cuts, burns).