Small dimensions and the ability to be transported on the roof of a passenger car do Lyman 350 One of the most sought-after boats among fishermen and hunters, this model is a classic flat-bottomed boat made of aluminum-magnesium alloy, which provides it with high strength and resistance to mechanical damage.
Unlike the inflatable counterparts, aluminum-boat And you're not afraid of sharp branches, reeds, or rocks in shallow water, but like any technology, there are some nuances of operation and maintenance that you need to know before you buy, and we'll go into detail about why this model has been around for many years.
You don't have to be a professional shipbuilder to understand the features of this boat, but you just have to study the design carefully and understand the principles of the hull. The main feature of the Lyman 350 is a completely flat bottom, which is ideal for shallow water, but requires caution on the wave. This factor determines the use of the vessel.
Technical specifications and design features
The hull is designed with an AMG sheet that is highly corrosive, with a bottom and side thickness of 2 mm, which is the best indicator for a boat of this class, providing a balance between weight and strength, and the dimensions allow two adults with a full set of equipment to comfortably accommodate.
The flat bottom provides minimal draught, allowing you to come close to the shore and pass where other boats would be stuck, but it is worth remembering that the absence of a keel and zygomatic splashers makes the behavior of the vessel in the wind and wave specific. Sustainable It's a great parking lot, but it takes attention on the move.
The trawler is made of plastic-glass plywood or solid metal, depending on the year of manufacture and configuration, and is designed to fit an outboard motor with a capacity of up to 10-12 hp, although many put more powerful units at risk for the transom. The weight of the boat itself is about 65 kg, which allows you to load it together without using a winch.
⚠️ Attention: When installing a motor more powerful than 10 hp, it is strongly recommended to strengthen the transom plate with additional corners, since the standard fastener may not withstand prolonged vibrations.
Let’s look at the main parameters in the numbers:
| Parameter | Meaning |
|---|---|
| Longest length | 3500 mm |
| largest width | 1350 mm |
| Height of board | 400 mm |
| Load capacity | 300 kg |
| Hull mass | 65 kg |
Performance in water
How he behaves. Lyman 350 In calm waters, in river backwaters and on small lakes, the boat is showing its best side. It easily goes to the plane with even one person in the motorized boat from 5 hp. The flat bottom allows you to quickly gain speed, but dramatically increases fuel consumption when trying to go against high waves.
The direct-course handling is good, but when the side wind blows, the boat starts to blow, and you have to adjust the course constantly, and that's the cost of not having a keel. Fishing It's the boat that's most effective in quiet weather or in wind-proof places, and it's convenient to throw gear because of the wide bow.
Wave resistance is the weak point of all flat-bottomers. If the wave height is more than 20-25 cm, a strong shaking begins, and when you move at an angle to the wave, you can risk tipping over. The use of Lyman 350 in large reservoirs in windy weather is prohibited by safety regulations.
But if you use the boat as it should, it's a very positive experience, and you can go to any beach, even the most gently, without fear of damaging the skin, which makes the boat indispensable for hunters who need to get on the wet shore quickly.
Necessary tuning and modernization DIY
When you buy the basic version, you get a "naked" case that requires improvements for comfortable use. The first thing owners do is install floorboards (floors). The regular wooden sleighs often rot, so they change to moisture-resistant plywood or grooved aluminum.
Next is the installation phase runductThere's no basic stuff, and you need to store things, life jackets and fishing gear somewhere, and you can boil a simple hazelnut out of aluminum or glue it together from plywood, you can fix it on your nose, and it also shifts the center of gravity and improves performance.
- 🛠️ Installation of a nose knob for storing things and ballast.
- 🪑 Fixing of rotary seats on removable platforms.
- ⚓ Installation of anchor box and ducks in the nose.
- 💡 Installation of running lights and lighting of the runduk.
☑️ Liman 350 refining plan
Don't forget to protect it. Aluminum, although strong, can wear off when used on rocky shores for long periods of time. Many owners put extra rubber strips on their cheekbones and bottoms or keel profiles. tent from the sun and rain, which is easy to make from PVC fabric and arcs.
⚠️ WARNING: When drilling holes in the body to install the mounts, be sure to use a sealant and rivets with a wide hat to avoid leakage and corrosion around the hole.
Choosing the best motor for the 350 Liman
The engine choice is a hot topic. The factory recommends engines up to 10 hp, but reality makes its own adjustments. For one fisherman with a minimum load, 5-6 hp is enough, but if you plan to take a passenger or cargo, you better look towards 9.9 hp.
Why not more? Because when you put the engine in, the 15 hp and flatter bottom starts to act like a springboard, and the boat starts to go off, to gallop on the waves, which is dangerous and uncomfortable. Speed. with a 10 hp engine is about 25-28 km / h with one person, which is enough to move around the water area.
Can I put an electric motor on?
Yes, the Lyman 350 is a great friend of electric motors. With its lightweight body, even a 30 lbs (about 13 kg) motor can accelerate the boat to 5-6 km / h, which is ideal for silent pike fishing.
Chinese brands (Parsun, HDX, Sea-Pro) now dominate the segment due to the price and availability of parts. They are heavier than Japanese counterparts, which is even better for a heavy boat than on the water. The Japanese (Tohatsu, Yamaha) are more reliable, but their price often exceeds the cost of the boat itself.
When choosing, pay attention to the length of the lower unit. For a flat-bottom, it is important to take out the right takeaway so that the screw does not capture air in the corners. The standard long shaft (L) is suitable in most cases, but sometimes you need to adjust the inclination of the motor.
Repair and maintenance of the aluminum case
AMG aluminum alloy does not rust like steel, but it is susceptible to electrochemical corrosion, especially in salt water or in contact with other metals. Regular inspection of seams and rivets is a mandatory procedure before each season. If you notice white plaque or oxides, they need to be cleaned.
Repairing holes or cracks is usually done by argon welding, which requires skill and equipment, so it is easier for a home craftsman to patch a epoxy mesh-reinforced glue (as a temporary solution) or to contact professionals. Welding It should be carried out only by an experienced craftsman, as thin aluminum is easy to burn.
- 🧼 Wash the hull with fresh water after each fishing in salt water.
- 🔍 Visual inspection of welded seams for microcracks.
- 🎨 Painting chips with epoxy paints for aluminum.
- 🔩 Checking the nut tightening on the transom and can fastenings.
Keeping the boat upside down under a canopy or in a garage. Direct sunlight is not a threat to metal, but it destroys wooden elements (if any) and burns out stickers. Wintering outside is permissible, but be sure to remove all removable elements.
Comparison with competitors and final conclusions
There are many analogues on the market: Kazanka, Ob, Salute. Lyman 350It's lighter than many competitors of comparable size, and compared to Kazanka-M, the Liman is narrower and less stable on the go, but much easier to transport.
Compared to PVC boats, the gains in plane speed and hull durability are obvious. PVC is easier to puncture and is afraid of fire sparks. Aluminum forgives many mistakes of inexperienced water-engineers. However, the comfort of a PVC boat with inflatable sides is still higher when spray is hit.
| Model | Weight (kg) | Length (m) | Passenger seats. |
|---|---|---|---|
| Lyman 350 | 65 | 3.5 | 2 |
| Kazanka-M | 145 | 4.0 | 4 |
| Salute 320 | 55 | 3.2 | 2 |
In conclusion, it may be said that The 350 is a great choice for a single fisherman or a small family living near a pool of calm water, a workhorse that, with minimal care, will last for decades, the main thing is not to require it to be seaworthy of an ocean liner and not overload it.
⚠️ Attention: Remember that aluminum boats are very noisy. The knock of tackle, anchor or footsteps on the bottom can be heard far away in the water, which can scare off careful fish. Use rubber mats or carpets.
The Liman 350 is a compromise between weight, price and comfort, ideal for quiet fishing on small rivers, but requiring refinements for full tourist use.
Frequently Asked Questions (FAQ)
What is the real Liman 350 load capacity?
Although the rated carrying capacity is 300 kg, in practice, 200-220 kg (two people + motor + minimum load) is considered a safe load for confident planing and stability.
Do I need to register Lyman 350 in GIMS?
Under current Russian law, boats weighing less than 200 kg and with an engine powering less than 8 kW (about 10.8 hp) are not subject to registration. Because the Lyman 350 weighs 65 kg, it does not require registration when used with a motor up to 10 hp inclusive.
Can I paint the boat with ordinary paint?
Conventional paints are poorly maintained on aluminum and quickly peel off. You need to use special soils for non-ferrous metals (for example, VL-023) and epoxy or polyurethane paints designed for the hulls of boats.
How to deal with condensation inside the boat?
Condensate is the eternal companion of the metal. You can't remove it completely, but you can minimize it. Use moisture absorbers in handukes, cover the boat with an awning with vents and periodically wipe the hull dry after operation.