Finding the perfect boat for small rivers and lakes often leads a water-engineer to a class of compact inflatable boats. Mishima Lite 335 It's a special feature of its balance between weight, load capacity and cost, and many anglers are looking for this option: lightweight, which can be carried to the water alone, but roomy enough for two people and a suite of gear.
Unlike the cheaper ones, this boat offers an improved inflatable floor design, which is critical for wave stability. You get not just a piece of PVC with oars, but a full-fledged water transport. Let's look at what's behind the 335 marking and why this size is considered the "golden mean" for lovers of quiet hunting.
It is important to understand that dimensions The 3.35-meter length allows you to keep your course even in lateral winds, which is often a problem for three-meter competitors, while remaining maneuverable enough for reed-grown backwaters, where every centimeter of width matters.
Design features and materials
The basis of the durability of any boat is the material from which it is made. Mishima Lite 335 laminated PVC This material is known for its resistance to abrasion, gasoline and oils, and ultraviolet rays, and the density of the fabric is usually about 750-850 g/sq.m., which ensures the necessary stiffness of the pumping cylinders.
The seams in this model are made by the method hot-glueThis is the industry standard for reliability, and this bonding method ensures that it's leakproof even when it's used for long periods in an aggressive environment, and unlike cold gluing, hot bonding creates a monolithic bond that's almost impossible to break without damaging the material itself.
- 🛡️ High-density reinforced PVC to protect against punctures.
- 🔥 Hot gluing of the seams for maximum tightness and durability.
- 💧 Wet-resistant plywood for decking, treated with special impregnations.
- ⚓ The presence of hinged bars around the perimeter to protect the board from impacts.
The inflatable floor design is a special consideration. Lite's modification often uses a system. NDND (low pressure inflatable floor) or hard plywood lamella flooring, depending on the specific configuration of the year of manufacture, the inflatable floor provides better germination on the wave and a comfortable landing, as the surface becomes smooth and elastic.
⚠️ Attention: When operating an inflatable floor boat, avoid contact with sharp stones and shells on the shore. Despite the high density of the material, the risk of puncture remains, so use a protective mat or special shoes when launching.
Technical specifications and load capacity
The size of the boat determines not only the number of passengers, but also the ability to install. boat-engineModel 335 has a total length of 335 cm, a width of about 144-150 cm and a height of about 36-38 cm Such dimensions allow you to place inside two adults of average size with a full set of fishing equipment.
Load capacity Mishima Lite 335 This margin of safety is enough for a confident presence on the water of two people and a motor with a capacity of up to 5-8 hp However, it is worth remembering that the rated power of the engine and the real speed are different things depending on the load and swimming conditions.
The weight of the boat itself (with floorboards or inflatable floor) is approximately 30-35 kg. This allows it to be transported in the trunk of a passenger car, although it will require two people to carry in disassembled form or the use of a trolley.
Below is a table with the basic technical data that will help you make the final decision:
| Parameter | Meaning | Comments |
|---|---|---|
| Total length | 335 cm | Optimal for 2 people |
| maximum width | 146 cm | Provides sustainability |
| Load capacity | 420 kg | Including the weight of the motor and equipment |
| Engine power (max) | 8bhp. | 5-6 hp is recommended. |
| Boat weight | 32 kg | Without motor and accessories |
Completement and ergonomics
Buying. Mishima Lite 335You get not only cylinders, but also a whole set of necessary accessories. Standard equipment usually includes two inflatable seats (banks), which can be moved along the side, fixing in special special equipment. lyctrossThis allows you to change the centering of the boat depending on the number of passengers.
The package also includes paddles, a pump and a remix. Oars are usually aluminum with plastic or wooden blades. They are lightweight and do not rust, which is important for long-term contact with water. The pump often comes complete with a boat, but experienced boaters recommend buying an additional foot or electric pump for convenience.
- 🪑 Two mobile inflatable seats with the ability to lock anywhere.
- 🚣 Aluminum paddles with plastic blades for ease of travel.
- 🛠️ Remake with glue and patches for prompt repair.
- 🎒 Packaging bag for easy transportation of all elements.
The ergonomics of the boat are designed so that the angler feels comfortable for several hours. rod-drive It's not a slow motion, but the rod mounts and the ability to fit a sonar make it an attractive model for avid fishermen.
When assembling a boat, always start pumping from the bow compartment, then move to the cylinders and last pump the keel (if any) to ensure the correct geometry of the hull.
Operation and care of PVC
And Mishima Lite 335 You've been in the service of this for years, you have to follow simple rules of operation, PVC is durable, but it doesn't like extremes, and extreme temperature extremes, prolonged exposure to the scorching sun inflated state, or storage in compressed form at negative temperatures can shorten the life of the product.
After each fishing, it is recommended to rinse the boat with fresh water, especially if you have been swimming in salty water bodies or in polluted rivers. The sand and silt, when dry, work as an abrasive, gradually destroying the protective layer of material.
⚠️ Attention: Never leave a fully pumped boat in direct sun on a hot day. The pressure inside the cylinders rises, which can cause the seams to rupture or deform the structure.
Storage should be done in a clean, dry and ventilated room, the boat should be folded carefully, trying not to create crevices in the same places every time, periodically (once a season) it is recommended to pump the boat and check the valves for leakage with soap solution.
How to keep a boat in the winter?
In winter, it is better to store the boat in a straightened form or rolled up in large free rings. Avoid storage in garages where temperature changes and rodents are possible. Optimal storage temperature is from -20 to +30 degrees, but without sudden jumps.
Compatibility with motors
Choosing a motor for Mishima Lite 335 The transom bar of the boat is designed for engines up to 8 hp, but the most rational choice will be an engine with a capacity of 5-6 hp This engine will provide a speed of about 20-25 km / h with one person and will save fuel.
The use of more powerful engines (9.9 hp and above) is possible, but not always justified. The boat can get on plane with two passengers, but the high-speed handling of flat bottom models with soft bottoms may not be ideal.
When installing the motor, it is important to adjust correctly differentiatorIf the boat's nose is up too high, it will prowl and mismanage. If it's too low, water resistance will increase and the risk of being overwhelmed by the wave. Experiment with the tilt angle of the engine's lower unit to get to the optimum position.
☑️ Checking before getting on the water
Comparison with competitors and final conclusion
In the market of inflatable boats model Mishima Lite 335 is competing with brands like the Flagship, hunter and Master: Mishima’s main advantage is often a more affordable price while maintaining decent quality materials, while some competitors may offer a stiffer bottom or a reinforced keel as standard.
Compared to more expensive ones, there's a difference in fittings and bag quality, but in terms of performance and reliability, PVC. Mishima It's a workhorse that doesn't require constant attention, and it's a pragmatic user who values functionality.
In conclusion, this boat is a great entry ticket to the world of water tourism, it forgives many mistakes for beginners, is easy to repair and does not require difficult storage conditions, and with proper care, it will become a faithful assistant on the water for many seasons.
The Mishima Lite 335 is the best choice for single anglers or couples looking for a balance between price, weight and capacity. The boat is ideal for relaxing fishing on lakes and small rivers.
What is the maximum weight of the Mishima Lite 335?
The maximum load capacity is about 420 kg. However, for comfortable and safe operation, it is recommended not to exceed 300-350 kg to maintain good germination on the wave and handling.
Can I install a 9.9 hp engine on this boat?
Technically, the transom will withstand such a motor, and the boat can plane. However, this may not be safe when fully loaded and will impair handling. Optimal power is 5-6 hp.
Do I need to lubricate the valves of the boat?
No special lubrication is required, but the main thing is to keep the valves clean so that the sand and dirt do not get into the locking mechanism, which can lead to etching of air.
How to properly seal a puncture in the field?
Use a remix from the kit. Degrease the puncture site, apply the glue to the patch and the boat, let it dry for 10-15 minutes, then press hard. Full polymerization takes about a day.