The revival of the legendary brand Kazanka in the form of a line Riverboat It was a real event for domestic water engines. Riverboat 46As a successor to classical designs, it combines time-tested aluminum technology with modern requirements for comfort and safety. This boat is designed for those who are looking for a reliable vessel for fishing, hunting or family walks on rivers and lakes.
Unlike its predecessors, the new version has improved ergonomics and the ability to install more powerful engines. Many owners of old equipment wonder how modern Kazanka corresponds to the realities of today. We will analyze the design features in detail so that you can make an informed decision about the purchase.
It should be noted immediately that aluminum This model is made of corrosion-resistant alloy, which significantly prolongs the service life of the vessel even in an aggressive aquatic environment. A key feature of Riverboat 46 is a reinforced bottom with longitudinal redanes, which provides excellent germination on the wave and stability on the go.
Design features and seaworthiness
The basis of the reliability of the vessel is its hull, made by riveting and welding technology. Seaworthiness The boats can feel confidently at the excitement of up to 0.6 meters, which is a significant indicator for open water bodies. The design of the translator is strengthened, which makes it possible to install motors with a capacity of up to 30 hp, although the optimal range is 15-20 hp.
⚠️ Attention: Despite the reinforced transom, when installing a motor with a capacity of more than 20 hp, be sure to use transmutation plates or hydraulic nozzles to prevent different on the stern.
The interior space is designed to accommodate a crew of 4-5 people. cockpit The boats are spacious enough, and the location of the cans (seats) allows you to comfortably fit with fishing rods or equipment, and the boards are sufficiently high, which increases the safety of boarding and disembarking, especially in unstable conditions.
The system deserves special attention. floatabilityThe sides and bow have sealed blocks that keep the boat afloat even when fully filled with water, a critical safety feature that is often ignored when choosing budget models, but it is given due consideration in Riverboat 46.
- 🌊 Increased keeliness of the bottom for better passability on the wave.
- 🛡️ Using aviation aluminum to reduce weight without losing strength.
- ⚓ The presence of a timber around the perimeter to protect the board during mooring.
- 🎣 Pre-installed places for fastening fishing equipment.
The boat’s dimensions make it easy to transport on a standard car trailer, and the width of the hull is tailored to ensure maximum stability in the parking lot, which is especially important for anglers who often move around the boat during fishing.
Technical specifications and compatibility with motors
When selecting a power plant for Riverboat 46 It is important to consider not only the maximum power, but also the weight of the engine. Light two-stroke engines made in China may not provide the proper traction at full load, whereas modern 4-strokes are ideal for this model.
The table below shows the main technicalTo help you decide on the choice of equipment and equipment:
| Parameter | Meaning | Note |
|---|---|---|
| Longest length | 4600 mm | Excluding attachments |
| largest width | 1650 mm | In the zygomatic belt |
| Height of board | 650 mm | In the middle part |
| Load capacity | 400 kg | Including weight of people and equipment |
| Engine power | 30 hp. | Recommended 15-20 hp |
It is worth noting that passport-power 30 horsepower is the limit. For everyday use, especially with family and cargo, it is wiser to stop at 15-20 forces, which will ensure optimal fuel consumption and engine life.
When choosing a motor, take into account its weight: for Riverboat 46, the optimal weight of the engine is in the range of 35-45 kg, so as not to overload the transom.
Comfort and internal arrangements
The interior of the boat is designed to be multifunctional, and you can use it for both high-speed walks and quiet fishing. Roompile control The engine allows you to conveniently sit at the side, freeing the central part of the cockpit.
Fishers are able to install tent It's built on arcs that protect you from the scorching sun or the sudden rain, and it's designed to quickly assemble an awning and put it in a jock without taking up useful space in the boat.
⚠️ Attention: When installing an awning, watch for the reliability of the arc attachment, since the sailing structure in the wind can lead to the boat tipping over with improper mooring.
The banks (seats) as standard can be wooden or moisture-resistant plywood, but many owners immediately change them to soft seats with crates for storage of gear, which greatly increases comfort on long transitions.
- 🪑 Possibility of installing rotary seats on pedestals.
- 🎒 The presence of knobs in the nose for storing things.
- 💡 Possibility of installation of running lights and navigation equipment.
- 🔋 Convenient placement of the battery under the front can.
Transport and storage
Transportation Riverboat 46 Because of the relatively small weight of the hull, loading the boat onto the trailer does not require special machinery or a winch of high power.
While storing a boat, it is important to follow several rules to extend its lifespan. Aluminum, although resistant to corrosion, requires care, especially in places of contact with fasteners and water. Regular washing with fresh water after use in salt water is mandatory.
☑️ Preparing the boat for winter storage
Water storage is possible, but it is not recommended to leave the boat on the water for the whole season without regular inspection of fouling and the condition of antifouling coating, if applied.
Comparison with analogues and predecessors
Comparative. Riverboat 46 With the classic Kazanka-M or Crimea, you can see significant improvements, the increased bottom keel makes the move softer, and the improved geometry of the frames adds stiffness to the hull, but the weight of the new boat can be slightly higher due to the use of thicker metal in critical nodes.
Compared to PVC competitors, the aluminum boat benefits in durability and power-engine capability. PVC boats are afraid of sparks, sharp objects and require more care when launching.
The Hidden Benefits of Aluminum Over PVC
The aluminum case is not afraid of punctures on sharp stones or driftwood, which often happens in shallow water, and the metal better extinguishes the vibration from the engine at high revs, making the trip quieter.
Compared to other metal boats, such as Ob-M or WindThe Riverboat 46 is a winner in modern design and ergonomics. Older models often had a too pointed nose that burrowed on the wave, while the new shape of the nose provides a better way to planing.
Maintenance and repair of the hull
Maintenance of an aluminum boat does not require complex tools. galvanicIt is important to monitor the condition of zinc treads, if they are installed, and not use steel fasteners to repair the underwater part.
When dents come in, aluminum is very easy to fix, and you can weld small cracks with argon, which restores the seam to almost 100 percent strength, and this makes the boat repairable even in the field with the equipment.
⚠️ Warning: Never use epoxy resins with metal shavings of other metals (copper, steel) to seal holes - this will accelerate the destruction of the aluminum case.
Regular inspection of rivet joints will detect weakening of joints in time, and rivets can be easily replaced if necessary, which is a big plus compared to all-welded structures where repair requires a qualified welder.
The main advantage of Riverboat 46 is its maintainability and the ability to upgrade on its own without losing warranty on the body.
Frequently Asked Questions (FAQ)
What is the real speed of the boat Riverboat 46 with a 20 hp engine?
At full load (2 people + equipment) the speed will be about 30-35 km / h With one driver and a tank of 25 liters, the speed can reach 40-42 km / h depending on the screw.
Do I need to register this boat with GIMS?
Yes, the weight of the hull of the boat Riverboat 46 exceeds 200 kg (in running order), which according to the current legislation of the Russian Federation requires mandatory registration of a small vessel.
Is it possible to go to sea in such a boat?
Output into the sea is possible only in the coastal zone in favorable weather conditions and a distance from the shore of no more than 3 miles.
Which screw is better to choose for this boat?
For 15-20 hp engines, a 9-10 inch screw is optimal. If the boat is often used with a full load, you can consider an 8 inch screw for a better plane exit.
Does the boat have drainage holes?
Basic equipment may not have automatic drainage. It is recommended to install the drain plugs at the lowest point of the transom or bottom for ease of pumping water.