Choosing a boat for small water bodies or calm rivers often comes down to finding a compromise between carrying capacity, weight and price. The Yaz 2 inflatable boat For many years now, it has been a strong presence in this segment, offering a time-tested design, a classic two-seater model that is ideal for single or double fishing with minimal gear.
Unlike more massive counterparts, this modification is characterized by ease of transportation and assembly. PVCThe silk that's used in manufacturing has proven to be reliable and resistant to mechanical damage, but to see if this is the right option for your needs, you need to take a look at all aspects of operation, from the engine installation to the ease of landing.
In this article, we will conduct an in-depth analysis of technical specifications, consider the real-world experience of use and answer the most frequent questions of potential owners. The maximum load capacity of the model is 350 kgSo, this is an important indicator for buoyancy planning, and let's see how these numbers relate to practice.
Construction and materials of manufacture
The basis of durability of any boat is the quality of the materials used. PVCThe material has a density of 750 g/sq.m., which provides excellent abrasion resistance against rocky bottoms and coastlines, and the seams are made by hot gluing, which ensures that the joints are leakproof even when they are on the water for a long time.
The design includes two independent inflatable tubes, a safety-based solution that would keep the boat afloat if one of the compartments were punctured. Separation seam The bottom is made of a denser material to protect against sharp objects.
An important feature is the use of petal valves, which allow you to quickly vent air during assembly and reliably hold pressure during operation. Inflatable seats (banks) are also made of durable material, but require careful handling, as they are point supports.
- 🛡️ PVC reinforced with a density of 750 g / sq.m. provides protection against punctures.
- 🌊 Two independent cylinders increase the emergency buoyancy of the vessel.
- 🔒 The petal valves prevent spontaneous air infusion.
⚠️ Attention! After the first pump, the boat must be left at room temperature for 8-12 hours, allowing the material to sit down and stretch, after which it will require re-pumping to the working pressure.
Technical specifications and dimensions
To understand the real possibilities of the boat, you need to turn to dry numbers. Overall length The height of the vessel is 290 cm and the width is 124 cm, which allows you to comfortably accommodate two fishermen of medium build or one person with a large number of equipment. The height of the board is 36 cm provides sufficient protection against splashes in calm water.
The weight of the structure in the assembled form is about 26 kg. This is a fairly light indicator that allows one person to carry the boat to the water without using a trolley. Working pressure The cylinders are 0.2 atm, which does not require the use of powerful compressors for service in the field.
Below is a detailed table with the main technical data of the model:
| Parameter | Meaning |
|---|---|
| Full length | 290 cm |
| Full width | 124 cm |
| Load capacity | 350 kg |
| Passenger capacity | 2 people. |
| Boat weight | 26 kg |
Installation of the outboard motor
Although the boat can be used with oars, most owners prefer motorization. outboard power up to 5 hp The design of the transom is made of moisture-resistant plywood and reinforced with linings, which allows you to withstand vibrations and engine thrust.
When choosing a motor, you should consider not only the power, but also the weight of the lower unit. For this model, lightweight two-stroke units will be the best option. Four-stroke engines They can also be used, but their greater weight can significantly reduce the payload and shift the center of gravity, which will affect driving performance.
The motor is fastened by screw clips, and it is important to check the tightening of the bolts regularly, as vibration can weaken the fixation. Other angle is regulated by the inclination of the engine itself, which allows you to optimize the output for planing depending on the load of the boat.
☑️ Check before installing the engine
⚠️ Warning! Exceeding the recommended engine power (more than 5 hp) can lead to transom deformation and loss of manufacturer warranty. Use only certified engines.
Comfort and ergonomics on the water
ergonomics Iase 2 Inflatable seats (banks) can move along the length of the cockpit, which allows you to adjust the weight distribution depending on the number of passengers. However, with prolonged exposure to water, seat rigidity can be a disadvantage, so experienced users often use additional linings.
The cockpit is large enough to accommodate a tackle box or sonar, and the sides are rounded, which is convenient for paddle-resting, but can make it difficult to get up from your knees. Internal volume It is distributed rationally, allowing you to place equipment between the legs or behind the back.
To increase comfort, many owners install additional elements, such as a fastener for the use of a fishing-rod Wind protection is low because there is no inflatable keel and low sides, so in windy weather it may be necessary to draw water.
- 🎣 Possibility of rearranging the cans for optimal weighting.
- 📦 There is enough space to accommodate a standard fishing box.
- 🚣 Convenient shape of cylinders for rowing oars.
Secrets to increasing comfort
To increase comfort, many fishermen use inflatable pillows under the back or homemade plywood pads on the transom to install additional equipment, and it is also recommended to use soft covers on cans if you plan to be on the water for more than 3 hours.
Packaging and transportation
When folded, the boat is packed in a sturdy PVC cloth bag, which can be packed in the trunk of a Class C passenger car or even in a large backpack (if you have a knack), weighing 26 kg, allows you to transport the vessel on public transport, although this can be difficult during peak hours.
The assembly and disassembly process takes about 15-20 minutes, if you have experience. Pump (usually foot or hand) is not included in the basic configuration of some versions, so it must be purchased separately. Electric pumps from the battery of the car greatly accelerate the process of preparing for the launch.
It is recommended to store the product in a straightened or semi-folded form at room temperature. Prolonged storage in a compressed state at low temperatures can lead to a "break" of the material and microcracks at the folding sites. Ultraviolet It also has a negative effect on PVC, so don’t leave the boat in direct sunlight for long periods of time unnecessarily.
When packing a boat during the cold season, let it warm to room temperature before unfolding, which will prevent cracks in the folds of the material that become brittle in the cold.
Comparison with competitors and analogues
There are many analogues on the market, such as frigate, hunter or AquaCompared to them, Yaz 2 is better in price and simplicity of design, but can be inferior in the presence of an inflatable floor (BBB) from more expensive competitors. The lack of an inflatable keel makes the move more rolling on the wave, but makes repair and assembly easier.
Compared to fully inflatable boats with NDND, Yaz 2 loses in the comfort of rowing against wind and wave, as a hard plyol bottom (if installed separately) or a simple inflatable floor dissects water less efficiently.
The manufacturer's pricing makes this model one of the most affordable in its class, an excellent choice for beginners who want to try water tourism without serious financial investments, and for professionals it can serve as a backup option or a boat for short-term casting.
Yaz 2 is the “workhorse” of the budget segment: it does not shine with premium comfort, but reliably performs its functions at a minimum cost of ownership.
Frequently Asked Questions (FAQ)
Can I install an electric motor on the Iaz 2?
Yes, installation. electric motor It's possible, and even preferable, for quiet fishing, and the weight of the battery should be factored into the overall load capacity, and the fastening is done on the same transom as the gasoline engine.
What repairs can be done yourself?
Small punctures and cuts are easily eliminated with the help of a remplekt, which usually comes with a kit. Pvc glue And the patch can restore leakage in 24 hours, and more serious damage to the valves or joints is best left to the specialists.
Will the boat fit in the trunk of the sedan?
Most mid-range (C-Class) sedans fit the boat in packed form, but the dimensions can vary depending on the model of the car, it is recommended to measure the trunk space in advance (about 100 x 40 x 40 cm in folded form).
Do I need to register the boat in GIMS?
Under current regulations, boats weighing more than 200 kg (in running order) or with a motor of more than 8 hp (10.88 hp) are subject to registration. Since the Yaz 2 weighs 26 kg, and the engine is usually put up to 5 hp, registration is not required.