Finding the perfect swimming aid for fishing or recreation often leads avid water-engineers to buy a bald-bort NDND boat. hydrodynamicIt is designed to withstand heavy loads and feel confident even in noticeable excitement, and has a hard low-pressure inflatable floor (LDPB) that provides excellent seaworthiness and comfort when moving, and the high side protects against splashes and allows you to safely navigate the deck.
The market today is full of offers from dozens of manufacturers, and it is easy for a beginner to get confused among the specifications, materials and price ranges. false-board It's not just a decorative element, it's a functional part of the design that affects handling and safety, and in this article, we'll go through what to look for before buying, what models are trustworthy, and how to make sure you choose an outboard motor for your future vessel.
Before you go to the store or place an order online, you need to clearly define the tasks that the boat will perform: Will it be going to a large reservoir with a high wave or a quiet fishing in the bay? PVCThe seams, and of course the size of the boat, and a well-chosen boat will last for years, giving you only positive emotions from the water.
Design features of boats NDND with false board
The main difference between such models and the classic versions with a high pressure inflatable floor (HDVD) is the rigidity and geometry of the bottom. NDMA (Low Pressure inflatable floor) is formed from special reinforced stringers and bulkheads, which creates a "bank" effect, but over the entire area, which allows the boat to better steer its course, not to bend under the weight of passengers and the engine, and also provides a softer ride on the wave.
The bulwark is an additional balloon structure that encircles the sides around the perimeter, and it has a dual function: it increases the usable area of the cockpit (workspace) and creates an additional air cushion that increases the air cushion. floatability And stability. When you get on board a wave, the bulwark dampens the energy, preventing water from scooping in.
Many modern models are equipped with a bolt, which is an extension of the bulwark, and this element protects the cylinders from mechanical damage when moored to the dock or pulled ashore. detachable or integrated into the main cylinder, which affects the weight in the assembled form and the speed of assembly.
- 🚤 The hard inflatable floor provides a flat surface for moving and installing equipment.
- 🛡️ The bulwark improves the safety of passengers by preventing them from falling overboard.
- 🌊 Improved scent per wave due to the additional height of the board.
- 🎣 Possibility of installing transom wheels and other attachments.
It is worth noting that the presence of a bulwark slightly increases the sailing of the vessel, which should be considered when using in open spaces in windy weather. However, modern aerodynamic profiles of cylinders minimize this effect, allowing you to develop high speeds without significant roll.
Selection criteria: material, seams and fittings
When buying a boat with a false borough, the quality of the material should be the first priority. reinforced PVC The density of the fabric usually varies from 750 to 1100 g/m2. For small double models, 750-850 g/m2 is enough, whereas for large boats under a powerful motor it is better to choose fabric 900-1100 g/m2.
The technology of connecting elements is also critical. There are two main types of seams: gluing (overlapping) and welding (bundling). Welded seams They are considered more reliable and durable, because they eliminate the layering of glue over time, but high-quality gluing with two-component polyurethane adhesive also guarantees high strength, if the production technology is followed.
⚠️ Attention! When inspecting the boat in the store, carefully check the places where the accessories and seams are glued for bubbles or unpatched areas. Assembly defects may manifest under load on water.
The fittings should be made of durable materials resistant to corrosion and ultraviolet light. transom plates, rim bolts, valves and holders of rods should not luft or have sharp edges. Pay special attention to pump valves - they must reliably hold pressure and have protection from sand and dirt.
When choosing a boat color, remember that dark green and camouflage models heat less in the sun and are less noticeable to fish, whereas lighter colors reflect the sun’s rays better and do not warm as much in the heat.
In boats with bulwarks, it is often reinforced with an additional plywood lining or metal profiles, and the power of the engine that can be mounted on the transom depends on its thickness and hardness of attachment to the cylinders.
Comparative table of popular models
To make the choice easier, we have prepared a comparative analysis of popular models of NDNDB boats with false bores on the market, these specifications will help to navigate the price segment and functionality.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | Max engine power (hp) |
|---|---|---|---|---|
| Badger 320 Classic | 320 | 150 | 450 | 9.9 |
| Flagman 330 | 330 | 155 | 500 | 9.9 |
| Miv and K K KA-330 | 330 | 152 | 480 | 10 |
| Aqua 310 N | 310 | 145 | 400 | 8 |
| Hunter 320 Lux. | 320 | 148 | 460 | 9.9 |
The models are middle class and are the middle ground for most anglers, compact enough to carry a passenger car in the trunk (often in two bags) and have enough space to accommodate two adults and the necessary equipment.
The choice of a particular model should be based not only on technical specifications, but also on ergonomics. Try to sit in a boat, appreciate the height of the seats, the convenience of the cans and the availability of the water. management Some manufacturers offer optional sleigh (wooden flooring) over NDND, which adds stiffness and comfort, but increases the overall weight.
Choosing a suspension motor for a boat with a false board
Buying a boat is only half the battle. The other half is the right match. outboard................................................................................................................................
For models up to 330 cm long, the best choice will be motors with a capacity of 5 to 10 hp Two-stroke units are preferable due to the lower weight and the ability to transport in any position, although four-strokes are quieter and more economical. It is important to consider the weight of the engine: for a single boat it should not exceed 20-25 kg, otherwise self-loading will be a test.
☑️ Checking exit readiness
When installing the motor, you need to strictly follow the instructions of the boat manufacturer. transom plate The engine should be set strictly horizontally, and the engine should not protrude too strongly under the bottom so as not to create resistance, but also not too high so as not to capture air.
⚠️ Attention! Never exceed the maximum recommended engine power specified in the boat's passport, which can cause the transom to break off and the boat to sink at full speed.
For boats with bulwarks, the standard dayweight (S) is usually perfect, but on larger models, a long leg (L) is sometimes required for the screw to operate in clean water without creating cavitation bubbles.
PVC boat operation and maintenance
The longevity of your boat depends on proper maintenance. After each release, especially on salt water, the boat must be rinsed with fresh water. PVC And it speeds up the aging of the material.
Drying is a critical step, and you can only keep the boat rolled up after all the elements have been completely dryed out, including hard-to-reach areas under the banks and inside the valves. Humidity inside the package will lead to mold that corrodes the fabric and glue seams. It is better to dry in the shade, avoiding direct sunlight, which can cause overheating and deformation.
How to keep a boat in the winter?
Store the boat in straightened or semi-assembled form at temperatures from -10 to +30 degrees. Do not leave it in the cold in a rolled-up state, as PVC becomes fragile and can crack when unfolded.
Periodically check the pressure in the cylinders. The pumped in the sun boat can burst, so in the heat it is recommended to blow a little air. Insufficient pressure leads to deformation of the bottom and reduced driving performance. The optimal pressure is usually 0.2-0.25 atm (indicated in the passport).
For minor repairs, always carry a remix. A small puncture obtained from fishing can be easily repaired with a special patch and glue. Don't ignore minor damage, as under load they tend to grow in size quickly.
Where to buy and what to pay attention to when ordering
You can buy a bluff boat with a bluffboard in specialized stores and online marketplaces. When buying live, you can evaluate the quality of the build, smell the material (the sharp smell of cheap plastic is a bad sign) and check the package. Online purchase is often cheaper for the price, but requires careful study of reviews and ratings of the seller.
Be sure to require a warranty card and instructions in Russian. Having a certificate of conformity ensures that the boat has passed factory tests. Pay attention to the availability of spare elements: remixes, bags, cans, pumps. Sometimes manufacturers save on accessories, offering a basic version, which eventually comes out more expensive.
The optimal strategy of purchase is to choose a proven model, wait for the seasonal sale (late summer or early spring) and immediately buy a quality anchor and life jackets.
When ordering online, carefully check the dimensions and weight of the package. Boats with false bores and BND can be heavier than classic counterparts, and they may require a more spacious car or delivery services.
Frequently Asked Questions (FAQ)
Do I need to register with GIMS for a boat with an engine?
Registration is required if the weight of the equipped vessel (boat + motor + hinged) exceeds 200 kg, or if the engine power exceeds 8 hp (10.88 kW). For most lightweight BNDD boats with engines up to 5-6 hp registration is not necessary, but the rules may change, so it is worth clarifying the current legislation.
Can I use a NDND boat in winter?
It is not recommended to use PVC boats at low temperatures, the material becomes rigid and brittle, which increases the risk of damage when hitting ice or shore. If the water is inevitable, special training and extremely careful attitude are required.
Which pump is better to choose for pumping?
For primary pumping of large volumes, foot or electric pumps are ideal. However, the final pressure (refilling) to 0.25 atm must be done manually, so as not to pump the cylinders and control the process. Electric pumps are good for the main volume, but not for precise adjustment.
How long does a PVC boat last?
When properly operated, stored and maintained, a quality PVC reinforced boat lasts 10-15 years or more, depending on the intensity of use, storage conditions (UV radiation) and the frequency of contact with sharp objects.