Choosing a boat for fishing or hunting is always a search for a compromise between weight, strength and price. low-pressure polyethylene boats (MHP), and one of the most popular models is the Sivuch, which is not just another trough, but an engineering solution that lets you forget about your fears of punching the bottom of rocks or driftwood.
Many aqueous engines are still skeptical of plastic, preferring classic aluminum or coated plywood. rotational They've stepped a long way. sluggishness durability and durability are available in the budget segment, which makes the Sivuch boat attractive for a wide range of users.
In this article, we will take a look at what this boat is, who it is suitable for, and what nuances to consider before buying. You will learn about the real specifications, behaviors on the water and the intricacies of operation, which are not covered in advertising booklets. If you are looking for a reliable vessel for overgrown water bodies or rocky rivers, this information will be critical for you.
Design features and production technology
The base of the boat Sivuch is a single body made of food. low-pressure polyethyleneUnlike PVC boats, there are no seams that can break apart or layers of plywood that are rotting, and rotational molding technology allows products to be made with the same wall thickness around the perimeter, which ensures that impact loads are evenly distributed.
One of the key features of the design is the presence of air-blockIt's built directly into the structure of the side and the bow, which makes the boat virtually unsinkable even when the cockpit is fully filled with water, and unlike inflatable tubes, these compartments cannot be pierced with a fishing hook or a branch.
⚠️ Attention: Despite the high strength of the material, when drilling holes under the liner fasteners or rod holders, extreme caution must be taken not to damage the internal air cavities.
The bottom of the boat is usually very keely, which has a positive effect on the stability of the course. However, depending on the modification, the geometry may differ. flat-bar along the perimeter, which protects the board from abrasion on the pier or shore, and also serves as the basis for fastening the safety lear.
- 🛡️ Impact resistance: The material can withstand direct impacts on stones and concrete without cracking.
- 💧 Unsinkability: Built-in sealed buoyancy blocks keep the boat afloat.
- ❄️ Temperature resistance: Polyethylene retains elasticity at temperatures up to -50°C.
Why is the HPD not rusting and rotting?
Low-pressure polyethylene is an inert material that does not react with water, salt, acids and alkalis. Unlike metal, it does not have electrochemical corrosion, and unlike wood and plywood, it does not have cellulose, which feeds on fungi and bacteria, making the life of the housing almost non-combustible, provided there is no mechanical damage through.
Technical specifications and dimensions
The Sivuch boat comes in several versions, which vary in length, width and load capacity. The base model is often about 3.2-3.4 meters long, which allows it to be transported on the roof of a passenger car without a trailer. The hull is usually 1.4-1.5 meters wide, which ensures sufficient width. stability for fishing standing or active fishing from the board.
An important parameter is the power allowance of the outboard motor. In the standard version of Sivuch, this figure is usually limited to 5-8 horsepower. Exceeding the recommended power can lead to the bow burrowing in the wave and loss of controllability, because flat-bottomed Some modifications are not designed for high plane speeds with full loading.
The weight of the boat in kerb condition is a separate topic to discuss: HDPE heavier than aluminum and even more PVC. A standard boat weighs about 70-80 kg, which requires two people to load on the car or use a special trailer. However, this weight is offset by incredible strength and no need for pumping or assembly.
Below is a table with averaged specifications of the popular modification:
| Parameter | Meaning | Unit of measurement |
|---|---|---|
| Maximum length | 3200 | mm |
| maximum width | 1450 | mm |
| Height of board | 450 | mm |
| Load capacity | 400 | kilogram |
| Engine power (max) | 8 | hp |
Accommodation and internal arrangements
When you buy a Sivuch boat, you get a ready-to-use boat, but the level of equipment can vary depending on the manufacturer and the specific batch. The basic version usually includes the hull itself, removable cans (seats) and a set of mounts. Banks are made of the same HDPE or moisture-resistant plywood and are fixed in special specially designed plywood. pockets Or brackets.
The outboard motor attachment system is a special consideration. timber Some models are equipped with hand-helds built into the nose, which allows you to store a life jacket, anchor or dry stock inside the case, protecting things from splashes.
For ease of movement inside the boat, the floor is often grooved, which prevents the legs from slipping even in wet shoes. soft-cover It is important for many hours of fishing, when you have to sit still.
- 🪑 Removable seats: It allows you to change the configuration of the internal space.
- ⚓ Anchor ducks: Located in the nose for convenient fixation of faline.
- 🔩 Ryms: Metal or plastic rings for fastening insurance and mooring.
When buying, be sure to check the equipment: the presence of nuts for fastening cans and fry bolts is often forgotten to put in a packaging bag, and they have to be purchased separately.
Operation: Water behavior and speed
How does the Sivuch boat behave on the water? This is perhaps the most common question of those who go with PVC or aluminum. Due to the streamlined shape of the nose, the boat is good at cutting waves, but due to its relatively small size and weight, it is sensitive to lateral wind. low-speed It's very confident, allowing you to pick up complex areas.
When you get on plane (which is possible with only one passenger and a 5-6 hp engine), the boat becomes dynamic. However, it is worth remembering that HDPE is flexible. When hit by a wave at high speed, the bottom can be slightly bent, which creates a feeling of "soft" stroke, but can cause discomfort for those who are accustomed to hard aluminum. squirt It helps to soften the blows, but does not completely exclude them.
It is important to consider that the plastic boat has a high sailing speed, and in windy weather, it can be very difficult to control, especially if you use an electric motor or a low-power gasoline unit. hydrofoil on the engine's lower unit, which stabilizes the boat on the course and facilitates the exit to planing.
⚠️ Warning: Do not attempt to reach maximum speed when the boat is fully loaded or in extreme excitement. This can lead to a wave overboard and loss of stability.
The boat's maneuverability is rated as good because of its short base, a 180-degree turn takes up a minimum distance, which is extremely useful when fishing in a trunk or on narrow ducts, braking is rapid, because a flat or low-keel bottom creates high water resistance when the gas is discharged.
Transport and storage of the boat
One of the main disadvantages of the boats from the PHD is their dimensions and weight in disassembled form. Sivuch can not be folded into a backpack, like PVC. To transport you need a car trunk on the roof, a trailer or a spacious pickup truck body. Weight 70+ kg dictates its conditions: launching often requires the help of a partner or use of a vehicle. wheel-trailer.
But there's a huge advantage to keeping these boats, because they're not afraid of extremes of temperature, ultraviolet light and humidity, and you can leave them outdoors for the winter just by turning them upside down and covering them with a snow awning, and unlike PVC, which can swell or crack in the cold, HDPE has been around for decades.
To facilitate transportation, many owners make or buy special items. boat-sled It allows one person to move a boat on solid ground to the water, and it's also a popular practice to keep a boat assembled in a garage, using it as a place to store fishing gear.
☑️ Preparation for winter storage
Comparison with competitors: PVC and Aluminum
To understand Sivuch's place in the boat hierarchy, one must compare it with its main competitors: Aluminum boats (Kazanski, sparrows) are stronger to puncture, but more susceptible to dents and corrosion (if not from special alloys); PVC wins in weight and compactness, but loses in durability and safety (puncture risk); Sivuch occupies the niche of the "unkillable workhorse".
If you prioritize speed and long-distance passages through large reservoirs, Sivuch may seem slow. local fishing It's perfect in small rivers, lakes and grassy bays, and it's very permeable, and it's very powerful to lean against a bush or a rock.
The price factor is also important: Sivuch is usually more expensive than similarly sized PVC boats, but cheaper than high-quality aluminum counterparts with similar equipment, while the life of the HDPE often exceeds the life of PVC by 2-3 times, making it economically viable to buy a PVC. long-distance.
The Sivuch boat is a pragmatic choice that puts reliability and safety above speed performance and ease of transportation.
Frequently Asked Questions (FAQ)
Is it possible to go out on a Sivuch boat to large water?
The access to large bodies of water (Ladoga, Onega, reservoirs) is possible only in sub-standard weather and near the shore. Due to the low height of the side and sailing, the boat is not intended for a serious wave. lifejackets and anchors.
Do I need to register the boat Sivuch in GIMS?
Registration depends on the weight of the boat and the power of the engine. If the weight of the boat with the engine is up to 200 kg (in some cases up to 230 kg depending on the year of issue of the regulations) and the engine power is up to 8 hp (10.88 kW), registration is not required. Sivuch often falls within this limit, but the exact weight is better weighed on the scale.
How to repair the boat in case of through damage?
For the repair of HDPE, special welding bars and a construction hair dryer are used. There are also two-component epoxy compounds for plastic, but welding gives a more reliable and durable result, restoring the monolithic structure.
How many people are comfortable in the boat?
Structurally, the boat can withstand up to 3-4 people, but it is comfortable to fish together. Three adult men will already sit very tightly, which can affect the stability and freedom of movement when catching fish.