Choosing a fishing or outdoor swimming facility is often a difficult dilemma, especially when budgets are tight and reliability requirements are high. PVC boat Aqua 3200 NDNDMany aquatic motorists see this model as an ideal replacement for heavy aluminum structures or cheaper, but less comfortable, paioline floor counterparts.
The main focus of the analysis of this model is the use of low-pressure (BND) This technology allows you to get a flat-bottom rigid body without the use of plywood or aluminum floorboards. Boat Aqua 3200 In the performance of NDNDM becomes much easier to transport and quickly collected on the shore, which is critical for those who go out on the water alone.
In this article, we will discuss in detail the design features, the real load capacity and the behavior of the vessel on the water. PVC materialsThe products used by the manufacturer and get practical tips on how to care for the product, which will help you make an informed decision about buying or using the watercraft you already have.
Structural features and materials of the body
The basis for the creation Aqua 3200 NDLD served as a five-layer reinforced PVCThis material is not chosen by chance: it provides high resistance to puncture and abrasion, which is especially true when pulling a boat on pebble or sandy banks. The density of fabric is 750 g / sq.m., which is the gold standard for recreational boats, providing a balance between strength and weight.
The key element of the design is low-pressureIt's a multi-stretching vertical thread, pumped to a working pressure of 0.2-0.25 atmospheric pressure, and it becomes rigid, like a plywood sheet, but still lightweight, and avoids the use of removable plyols, which often become a source of creak and take time to install.
⚠️ Warning: Do not pump cylinders above the recommended pressure of 0.25 atm, especially in hot weather. Excessive pressure can cause welds to rupture or deformation of the geometry of the case.
The boats are equipped with a beam around the perimeter, which greatly facilitates the approach to the shore and mooring. Tightness The compartments are provided with high-quality gluing and the use of reliable valves that do not poison the air even during prolonged parking, the design involves the presence of three independent inflatable compartments, which ensures buoyancy even if one of the cylinders is damaged.
Technical specifications and dimensions
When choosing a boat, it is critical to rely on dry numbers that reflect the real capabilities of the vessel. Boat Aqua 3200 It is positioned as a two-seater, but its dimensions allow you to comfortably accommodate three passengers, if you do not plan to drive actively for an outboard motor. The length of the body is 320 cm, and the width is 145 cm, which provides excellent stability in calm water.
The weight of the kit is one of the main advantages of the model: disassembled, without motor and equipment, the boat weighs about 42-45 kg. This allows it to be transported in the trunk of a passenger car, although it will still require two people to carry in the bag or the presence of a wheel transom, the maximum load capacity is stated at 450 kg, which includes the weight of passengers, engine and equipment.
For a more detailed understanding of the model’s capabilities, consider the comparative specifications table:
| Parameter | Meaning | Unit of measurement |
|---|---|---|
| Full length | 320 | centimeter |
| Full width | 145 | centimeter |
| Diameter of the cylinder | 38 | centimeter |
| Load capacity | 450 | kilogram |
| Boat weight | 43 | kilogram |
It is important to note that maximum capacity The outboard motor for this model is limited to 5-8 hp depending on the modification of the transax plate. Installation of a more powerful engine is not recommended, as it can lead to deformation of the transom and reduced safety on the water.
Comfort and ergonomics on the water
ergonomics Aqua 3200 NDLD The wide seats (banks) are made of waterproof plywood and are covered with reinforced cloth, which prevents slipping and provides comfort during prolonged sitting. Adjusting the position of the seats allows you to change the center of gravity of the boat or make room for the cargo.
Presence keel (depending on the specific modification of the series) or hard profiling of the bottom of the NDND gives the boat excellent running performance. The vessel easily goes to planing with minimal engine power, which saves fuel. The softness of the inflatable floor cushions the shocks against the wave, making the course smoother than hard-deck counterparts.
In the nose there is a kunduk for storing small things, which also performs the function of an inflated balloon that increases unsinkability. Leer cableStretching along the sides, serves not only as a decorative element, but also allows you to fix the safety crease or additional cargo.
To increase comfort in hot weather, cover the cans with a light cloth or use special covers - dark plywood is strongly heated in the sun.
However, it is worth remembering the specifics of the inflatable floor. On a strong wave or during sharp maneuvers, you may feel some "softness" of the floor under your feet, which is not critical for fishing, but requires addiction when you row or walk on a boat.
Assembly and descent preparation process
One of the great advantages of NDND is the speed and ease of assembly, and you don't have to spend time stacking and fixing the floorboards, which is especially valuable in windy weather or when you're working alone, and it takes 10 to 15 minutes if you have experience.
☑️ Boat assembly algorithm
The first step is to start building the boat on a flat, sharp-cleaned surface, pump the quill (if designed), then the bottom, and then the cylinders, which is the right sequence for the hull geometry, and the most convenient way to pump is to use a foot or electric pump with a pressure gauge.
⚠️ Attention: Always control pressure with a pressure gauge. Pumping "by eye" in cold weather will cause the boat to pump when going out in the sun, and in the heat - to under-pump and loss of stiffness.
After pumping all compartments, you need to check the tightness of the valves and install graffitiThe motor fastening is made directly on the transom, which in this model is rigid and does not require additional reinforcements for the engines up to 5 hp.
Operation and care of PVC materials
Durability Aqua 3200 boats It depends on proper care. Polyvinyl chlorideThe stainless tank, which is resistant to fuel, salt water and ultraviolet light, but requires certain operating rules, and after each foray, the boat must be thoroughly washed with fresh water, removing sand, silt and fish residue.
Drying is a critical stage in preparation for storage. Even the minimum amount of moisture inside the bag can lead to mold and an unpleasant odor that is extremely difficult to remove. Dry the boat should be in the shade, avoiding direct sunlight, which can cause uneven air expansion and overheating of the material.
How do you remove the clutter at the bottom?
BNDD floors are common after storage. To spread them, pump the boat and leave it in the sun for 20 to 30 minutes. The heat will soften the PVC, and the straightening threads inside the bottom will return it to its correct shape. Don't walk on the boat at this point!
Use special bags or covers to protect you from dust and rodents, the optimal storage temperature is from -20 to +40 degrees Celsius, subject to these conditions. tenure The boats can be used for more than 10 years.
Comparison with competitors and modifications
There are many analogues on the market, such as Flagship, Siberian or brig. However, Aqua 3200 It benefits from the optimal value for money ratio, and unlike the cheaper models, it uses denser fabric and reinforced mounting slings.
There are various modifications to this series, including the C version. keel (NDNA) or reinforced transc. Keel models are better at steering and softer at wavelengths, but they're a little heavier and harder to assemble. The choice of the specific version depends on the operating conditions: for large reservoirs, the keel is preferred, for small rivers, the classic flat bottom of NDNDT.
The Aqua 3200 NDND is a compromise solution ideal for fishing in small and medium-sized waters, where mobility and ease of assembly are important, rather than high speed qualities.
You should also consider the package when choosing, as some dealers offer basic versions without a pump or bag, which can come as a surprise.
Frequently Asked Questions (FAQ)
Can I use the Aqua 3200 for sea fishing?
Salt water is not a threat to PVC, but high seas with a large wave are not suitable for boats of this size and design, and it is recommended to use it in protected bays or off shore.
Which pump is better for pumping the bottom of NDND?
For low pressure bottoms, two-stage foot pumps or low-pressure electric compressors are ideal. It is important to have a pressure gauge, since the bottom requires precise pressure compliance (usually 0.2 atm).
How to fix a small puncture in the field?
For emergency repairs, use the remix kit that comes with it. The surface needs to be degreased, glued, patched and pressed with a load. Full polymerization takes about 24 hours, but keeps the air patch starting almost immediately.
Do I need to register a boat with GIMS?
Under current Russian law, boats weighing less than 200 kg (together with the engine) are not subject to registration. Aqua 3200 motor up to 5 hp fits into this limit, the rights to control and registration are not required.