Choosing the first boat for fishing or family walks on weekends always involves finding a balance between cost, size and reliability. PVC Aqua 3200 SKKFor several years, it has been one of the most popular models in the Russian market.
The model attracts attention with its versatility: at a length of only 3 meters 20 centimeters, it is able to comfortably accommodate two or three people, while ensuring excellent maneuverability on the water. In this article, we will discuss in detail the design features, real load capacity and nuances of operation that you will face.
It is important to understand that the abbreviation SCC The name indicates a specific design of the bottom, the Middle Kiel Ring, which is a key difference from simple flat-slippers and inflatable keel models, which directly affects the driving performance and stability on the wave, making the boat predictable to drive even in small winds.
Many beginners mistakenly believe that all boats about 3 meters long are the same. Aqua 3200 And it shows how engineering can make the most of the space available, and we're going to look not only at the dry numbers in your passport, but also at how the boat behaves in real-world water conditions.
Design and features of the hull of the boat Aqua 3200
The basis of durability of any inflatable vessel is the quality of materials and the correct geometry of cylinders. Boat Aqua 3200 It is made of five-layer reinforced PVC, which is resistant to ultraviolet, gasoline and mechanical damage. The density of the fabric is 850 g / m2, which is the standard for this class, providing the optimal weight-to-strength ratio.
And the system that we're looking at is the suture reinforcement system, and unlike the cheap ones, where the sutures are just laced with glue, it's a technology that's applied. double-patchThis is a critical point, because seams are the ones that are most affected by inflating and wave.
The translation board is also designed to accommodate outboard motors, and the transom board is glued into cylinders and reinforced with fiberglass or plywood linings (depending on the year of manufacture), which allows for engines up to 5-6 hp without the risk of deformation of the stern.
For ease of movement inside the cockpit, the manufacturer provided a system fixator This prevents the floor from being shifted during movement, which is often the case with low-quality simple inflatable floor (BBB) models.
- 🛡️ Material: PVC reinforced 850 g/m2 with protection against UV radiation.
- 🔩 Tranza: Reinforced, designed for engines up to 6 hp, with the possibility of installing a sonar.
- ⚓ Furniture: Plastic of increased strength, resistant to salt water and frost.
- 🎒 Package: In the basic set, there is often a carry bag, a pump and a remix.
Features of cylinders
The diameter of the cylinders Aqua 3200 is 36 cm, which provides a good buoyancy reserve, but increases sailing in strong lateral wind. To compensate for this effect, it is recommended to use an anchor-cat or correctly select the course relative to the wave.>
Bottom system: advantages of the SCC design
abbreviation SCC It stands for "Middle Kiel Ring," and it's not just a marketing ploy, it's a real engineering solution. Unlike flat-slippers, which prowl at speed, or full-fledged inflatable keels (NDCs), which take a long time to assemble, the CCS system is a compromise. Along the bottom axis, there's an inflatable keel-ballon that gives the body a hydrodynamic shape.
The main advantage of this system is the speed of assembly. You don't have to wait for the whole floor to pump, like you do with the whole floor. NDMA (Low Pressure inflatable floor) Just inflate the cylinders and the keel, and the boat is ready to launch, which is especially valuable in windy weather or when you need to get ashore quickly.
The bottom is rigidized by a sleigh, a set of plywood or aluminum plates that are stacked on top of an inflated keel, connected by a sling or profiles to form a hard surface, which allows you to stand confidently on your feet while you fish and distributes the load from the passengers evenly.
⚠️ Warning: When sleigh assembly, make sure that the plate joints match the inflated keel. Attempting to push through the hard floor without first inflating the keel can lead to breakage of locks or damage to the bottom tissue.
Driving qualities of a boat with a system SCC They allow you to reach speeds of up to 25-30 km / h with a 5 hp engine, which is enough to move along large reservoirs or rivers with moderate currents. The boat pecks less with its nose when entering the plane than flat-bottomed models.
Technical specifications and data table
For those of you who are used to using accurate numbers, we've created a summary of the specifications. Aqua 3200 SCK Competitors and evaluate suitability for your tasks.
| Parameter | Meaning | Comments |
|---|---|---|
| Full length | 320 cm | Optimal for 2-3 people |
| Full width | 142 cm | Sustainable landing |
| Diameter of the cylinder | 36 cm | Standard for this class |
| Load capacity | 400 kg | Including boat and motor weight |
| Boat weight | 38 kg | Without motor and equipment |
| Engine power | up to 6 hp | 4-5 hp is recommended. |
And you can see the load factor, but the 400 kg passport looks impressive. workload If you subtract the weight of the boat itself (38 kg), the engine (20 kg), the gas tank (10 kg) and the equipment, you have about 250-280 kg left on passengers, which means that two adults will feel the most comfortable in the boat.
Packed dimensions allow the boat to be transported in the trunk of most sedans if the rear seats are folded down. The carry bag has comfortable straps, but a 38kg weight can be a challenge for one person when transported long distances on foot.
Choice of motor and installation of attachments
The choice of engine for The Aqua 3200 is particularly acute. the manufacturer declares the possibility of installing engines up to 6 hp, but experienced water engines recommend sticking to the "golden mean".
The ideal option for this boat would be a two-stroke engine with a capacity of 4-5 hp. Why not more? The fact is that when you install a 6-horsepower unit, the boat goes to the plane, but the margin of stability decreases, and any sudden movement can lead to a dangerous roll, and the transom experiences increased vibrational loads.
For the installation of attachments, such as sonar or spinning holders, special platforms are provided in the design. transom wheels It is a must-have accessory, as it is extremely difficult to drag a 38-pound boat on sand or rocks alone.
When installing the engine, use only certified rods and watch the tilt angle of the lower unit. Incorrect installation can lead to cavitation and loss of traction, as well as splashing the cockpit with water.
- 🚤 Motors 2-3.5 hp: The boat does not plane, is used as a quiet electric boat or for quiet fishing.
- 🚤 Motors 4-5 hp: The optimal planing mode for one or two people.
- 🚤 Motors 6+ hp: Overkill mode, high speeds, but increased risk and fuel consumption.
- 🔋 Electric motors: Perfect for quiet fishing, but require a heavy battery, which reduces the payload.
☑️ Checking before getting on the water
Operation, care and winter storage
And PVC Aqua 3200 SKK It's been around for years, and you have to follow a set of rules of operation, and PVC is tough, but it doesn't like extremes, and the extreme temperature, especially in the cold, makes it fragile.
After each foray into the water, the boat must be thoroughly washed with fresh water, especially if you have been swimming in salty water bodies or in stagnant water with algae. Salt and organics can erode glue seams and oxidize fittings.
Drying is a critical step. You can't put a wet boat in a bag, and the moisture inside will cause mold to break down the reinforcing layer of the fabric, and it will cause a bad smell that's hard to get rid of. Dry the boat in the shade, direct sunlight when pumped can cause the seams to rupture because of air expansion.
⚠️ Warning: Never leave a pumped boat in the sun or in a hot room unattended. The pressure inside the cylinders is increasing and the valves may not be able to withstand, leading to deformation or explosion of the cylinder.
For winter storage, it is recommended to slightly lower the cylinders (to the state of a soft toy) and store the boat in a straightened form or neatly rolled up in a spacious bag at room temperature.
Frequently Asked Questions (FAQ)
Can I use the Aqua 3200 for fishing in winter?
You can use a PVC boat in winter, but with caution. At temperatures below -10°C, the material becomes rigid and damaged. You need to use special winter valve lubricants and avoid impacts on the ice. You only need to keep the boat warm in winter.
What is the optimal pressure in the cylinders?
The working pressure in the cylinders is 0.2 atm (you can check by touch - when pressed with a finger, the surface should be slashed for 2-3 cm). In the keel, the pressure should be higher - about 0.4-0.5 atm to ensure the stiffness of the bottom.
Will the boat fit into the trunk of the sedan?
In most mid-range sedans (for example, Toyota Camry, Kia K5), the Aqua 3200 boat fits in a bag with the rear seats folded down. In small cars (Solaris, Rio) you may need to remove the rear shelf or put the bag diagonally, which is not always convenient.
How to repair a puncture in the field?
The remix is usually patched and glued. For reliable repair in the field, it is better to use two-component polyurethane adhesive (for example, 999 or 4508). The surface should be defatted and cleaned before applying the glue.