Choosing an inflatable boat for serious fishing or family walks often leads to a model. Antey 420This boat is deservedly considered one of the most popular in its class due to the successful combination of load capacity, strength and comfort, owners appreciate it for its ability to withstand severe loads and pass even through rocky shallow waters.
However, like any technically complex product, this model has its own features of operation, which are worth knowing before buying. PVC boat Antey 420 It requires the right approach to assembly, storage and selection of the engine, and in this article we will discuss all the nuances in detail, so that your acquaintance with the water element is safe and pleasant.
And we're going to start by looking at the specifications, the design of the cylinders and the bottom, and these are the elements that determine how a vessel behaves on the water, and understanding how your craft is built will help you make better use of its capabilities.
Construction and materials of the shell
The basis of durability Antey 420 It is a five-layer reinforced PVC material that is highly resistant to ultraviolet, gasoline and mechanical damage, has a fabric density of 750 g/sq.m, making the sides rigid and resistant to puncture. To reinforce critical areas, the manufacturer uses overhead elements that increase the product's life.
The cylinders are designed to have powerful beams around the perimeter, which protect the beam from abrasion when moored and hit the pier, and the inside of the balloon is divided into sealed compartments, which ensures that it is not sinkable even if one of them is damaged. crucial The safety aspect of water.
⚠️ Warning: Do not leave a fully pumped boat in direct sunlight for long periods of time unattended, and the air pressure inside the cylinders increases proportionally to the temperature, which can cause the seams to rupture.
The elements are connected by hot gluing, which ensures that the seam is tight for many years, and the seams are an extension of the fabric itself, not just adhesive, which distinguishes quality models from cheap ones, where the seams can be layered under load.
At the bottom of the structure is an inflatable keel beam, which gives the body excellent seaworthiness, allowing you to confidently cut the wave. The shape of the bottom is designed to minimize splashing and ensure a stable course when driving for an outboard motor.
Features of the inflatable floor of the NDND
The main feature of the model is the use of technology. NDMA Unlike the flatbed, it doesn't require the construction of a complex floor made of aluminum boards. The bottom is a single structure that inflates to a working pressure of 0.2 atmosphere.
This technology allows you to get a completely flat floor surface without joints or gaps, and it's convenient to stand, sit and navigate the cockpit while fishing, and the absence of hard elements also means that you won't tear your clothes or gear against sharp edges.
The secret to the stringency of NDNDM
The design of the NDNDT is made up of thousands of vertical threads connecting the top and bottom surfaces, and when inflated, the threads are pulled, creating a rigid platform that can withstand the weight of a few people and a motor.
It takes a lot less time to build a boat with NDT, so you don't have to put in paioles, stringers and fasten them, you just have to spread the cylinders, pump them up and install the seats, and this is especially valuable when you have to go down quickly or finish fishing.
It's important to note that inflated bottoms have excellent thermal insulation properties. Unlike cold aluminum, PVC is pleasant to the touch even in cool weather. It's quite comfortable to sit on the floor without a mat, although using a litter still prolongs the life of the fabric.
Dimensions and capacity of the cockpit
Model range Antey The 420 is no exception, the total length of the boat is 420 cm and the width is 190 cm, which allows you to comfortably accommodate three adults with all the necessary equipment.
The working area of the cockpit is 280x120 cm. This space is free of cylinders and gives enough space for active fishing. You can freely move, get up with a fishing rod or spinning, without fear of hitting the side or losing balance.
- 🎣 Ideal for trophy fishing using large tackles.
- 👨👩👧👦 Comfortable for family walks with two children and adults.
- 📦 It allows you to take with you a large load for multi-day expeditions.
The 48 cm height of the side provides excellent protection against wave swamping, and even when driving against the wind or on turns, the water remains overboard, an important parameter for those planning to go to large reservoirs or Ladoga.
Technical specifications and scheme of inflating
For proper operation, the manufacturer's recommendations for compartment pressure must be strictly followed, and failure to comply with these standards can lead to either deformation of the body or damage to it.
| Parameter | Meaning |
|---|---|
| Length full, cm | 420 |
| Full width, cm | 190 |
| Diameter of the cylinder, cm | 48 |
| Load capacity, kg | 900 |
| Weight of paiole boat, kg | 62 |
The inflating pattern requires consistency. First, the keel is pumped to 0.2 atm, then the main cylinders to 0.25-0.28 atm. The pressure in the cylinders can be adjusted depending on air temperature and load. In hot weather, it is better to under-pump the cylinders by 10-15% to compensate for the expansion of air.
The use of a pressure gauge is mandatory. Eye pumping often results in uneven distribution of the load. Pressure control The mechanical gauge that comes with the kit is accurate enough for household use.
Swallow tail valves or their equivalents provide tightness and ease of pumping, they are equipped with a protective cap that prevents dirt and sand from entering the cylinder. Regularly check the cleanliness of the valves before closing.
Operation and selection of motor
The choice of the engine is a key moment for comfortable operation. Passport maximum engine power for this model is 15 hp However, the experience of owners shows that the best option is a 9.9 hp engine with subsequent waste or 15 hp at once, if the budget and weight allow.
With a 5 hp engine, the boat will plane with only one person on board and minimal cargo. To fully operate the full potential of the hull, you need a power reserve. Two-stroke engines are preferred because of the lower weight, which is important when transporting.
When you install the squirrel motor, use a safety cable, run it through a squirrel bolt on the transom, and fasten it to the lower unit motor, which will save the engine in case of a cut of the slabs or a break in the mounts.
Translates on Antey 420 They're made of moisture-resistant plywood, reinforced with metallic linings, and they can withstand the vibration and weight of the engine, but they need careful handling, and you shouldn't throw the motor abruptly or use it as a stop when you pull the boat ashore.
The speed of driving for an outboard motor 15 hp with one person can reach 30-35 km / h. When fully loaded, the speed decreases, but the boat remains stable and manageable. It is important to correctly distribute the weight of passengers and cargo to get on plane.
⚠️ Warning: Before starting the engine, make sure that the lower unit is submerged in water. Dry operation of the engine for even a few seconds can lead to overheating and jamming of the pump.
Package and additional options
Basic equipment usually includes the boat itself, the bag-pack, the refit and the pump. However, for full operation, additional accessories are often required. Manufacturers and dealers offer a wide range of options that improve comfort.
Among the useful additions are anchor ducks, rod holders and sonar. pole-anchor Weighing 4-5 kg will ensure a reliable parking even on the current. For fishing in the dark, installing running lights is indispensable.
- 🚣 Stringers to enhance the rigidity of the inflated bottom (optional).
- 🛡️ Additional protection of the keel from rubber band.
- 💺 Spinning seats with the possibility of adjustment.
Also popular is the installation of an awning or a running canopy, which protects against the scorching sun and sudden rain, and the awning frame is usually made of duraluminum tubes, which are easily assembled and not susceptible to corrosion.
☑️ Pre-season checks
Care and storage of products
The durability of PVC materials depends on the storage and maintenance conditions. After each foray, the boat must be washed with fresh water, especially if you have been swimming in a salty water body or in a place with abundant vegetation.
Drying the boat in the shade, in the straightened form, you can not fold the wet product categorically, it will lead to mold and an unpleasant smell, which will then be difficult to get rid of, mold not only spoils the appearance, but also reduces the strength of the material.
Keep the boat in a case at a temperature of -30 to +50 degrees Celsius. Although the material is frost resistant, it is not recommended to store it in the cold because of the risk of accidental damage by sharp objects.
Regular washing and drying of the boat after each operation increase its service life by 1.5-2 times. Do not be lazy to rinse the hull, even if visually it seems clean.
Once a year, it is recommended to treat seams and surfaces with special products for PVC care, which restore the elasticity of the material and protect against ultraviolet radiation, such products can be purchased in specialized stores or ordered from the manufacturer.
Frequently Asked Questions (FAQ)
Can I pump a boat with a car compressor?
You can use a car compressor, but with caution, it creates high pressure and can overheat quickly, it is better to pump the cylinders with a compressor to 70-80%, and the final pressure is reached with a foot or hand pump, monitoring the pressure gauge. Compressors often do not have a built-in low-range pressure gauge (up to 0.3 atm), which makes accurate pumping impossible.
How many people are comfortably accommodated in Antey 420?
Passport capacity is 4 people, but that's the limit, and 2-3 adults can fish or move comfortably, and there's not enough space for a fourth passenger, and the load capacity will be almost completely chosen, which will reduce speed and handling.
Do I need to lubricate the valves before storage?
You can't oil the valve or you can't grease it, it destroys the rubber seals, just wipe them with a clean dry cloth, and if you start to poison the valve, you have to disassemble it, wash it with water and collect it back, check for debris.
Which anchor is better to choose for this boat?
The optimal weight of the anchor is 1/10 of the displacement of the boat. For Antey 420 with a full load (about 700-800 kg), an anchor weighing 5-7 kg is suitable. It is better to use an anchor-cat or Grapple anchor, as they are compactly folded and hold well on different bottoms.