Choosing a boat for fishing or water recreation is always accompanied by a thorough market study, especially when it comes to classic inflatable boats with hard transom. The 3.2-meter long models occupy a unique niche, offering a balance between mobility and spaciousness, making them among the most sought-after in the segment. Armor 320 SC The domestic production has become one of the leaders in this category due to the affordable price and proven design, which is confirmed by numerous reviews of owners.
In this article, we will analyze the design features of this model in detail, evaluate the real driving performance under different engines and find out how justified the brand name in real life. Understanding the nuances of assembly and maintenance will help to extend the service life of the product and avoid typical mistakes of beginners.
Construction floor-floor The (NDND) or classic hard-stringer inflatable floor in this model provides excellent water-based rigidity, allowing even one person to plane with confidence. The plant's engineers have tried to create a versatile product that is suitable for both quiet fishing in quiet weather and more dynamic movement in waters. It is important to note that the combination of weight and dimensions makes this size the "golden mean" for most water bodies.
Materials used in production Armor 320 SCThe silk, which meets modern safety standards, but has its own specifications in operation at low temperatures. The dense reinforced fabric withstands serious mechanical stress, but requires proper maintenance in the off-season, and with the details, we will understand why this boat has been popular for many years.
Technical specifications and construction
Dimensions and weight are the primary parameters that a potential buyer pays attention to when choosing a floating craft. Length The 320 cm range allows two fishermen to comfortably fit with tackles while maintaining the ability to install a motor up to 10-12 hp, although data-sheet figures can vary depending on the year of release. The width of the cockpit provides sufficient stability, which is critical when fishing standing or in windy weather.
Special attention should be paid granuleThis is a plywood model that is waterproof and reinforced with metallic linings, and it allows you to install motors that are powerful enough for a given size without fear of deformation of the stern. tree There is a tree, and even with impregnation, it requires periodic checks of the condition of the paintwork.
- 📏 Length full: 320 cm, length of cockpit: 245 cm
- 📏 Full width: 145 cm, cockpit width: 95 cm.
- ⚖️ Weight of the kit (with bags): about 48-52 kg.
- 🌊 Height: 38 cm, carrying capacity: up to 400 kg.
System system stringer In the design of the bottom, it provides the necessary longitudinal rigidity, turning a soft balloon into a full-fledged shell that can go sliding. The rigid elements are inserted into special pockets and fixed, creating a flat plane, and it is this technology that allows the boat to confidently keep its course and not "scour" when moving against the wave.
⚠️ Warning: When assembling stringers, make sure that their edges do not rest on the welded seams of the inflatable floor, this can lead to scuffling and depressurization in the future.
The secret of the reinforced translance
The design of the transom in the model of Armor 320 SK provides for the possibility of installing trans manoeuvre wheels without modifications, since the fastening holes often already have amplifications or plugs, which simplifies the retrofitting of the boat with additional equipment.
Materials and build quality
The basis of the durability of any inflatable boat is the material from which its cylinder is made. Armor 320 SC five-layer reinforced PVC fabric is used, which is characterized by high density and resistance to ultraviolet radiation. Reinforcing layer inside the material structure prevents stretching under pressure, preserving the geometry of the cylinders even after prolonged exposure to the sun.
Quality. suture This model uses a two-part polyurethane glue that ensures high leakage, but visual inspection of the product immediately after purchase is mandatory: there should be no glue bloating or sticking out threads at the docking points.
Furniture used for fastening rym, pen and holderPlastic elements are usually painted to the tone of the cylinder, but over time can fade faster than the fabric itself. Metal rings for anchoring or motor insurance must be securely pasted into the base, without backlashes.
| Parameter | Meaning / Description | Impact on operation |
|---|---|---|
| Tissue density | 750-850 g/m2 | High resistance to punctures |
| Type of seam | Glue, swamp. | Reliability, maintainability |
| Reinforcements | Squatters, slacks. | Protection from waves and abrasion |
| Tissue | Grey, Saladow, Camouflage | Masking or notability on the water |
It is worth noting that The quality of the glue used in the plant can vary from batch to batchSo in the first season, it's recommended that you keep a close eye on the seams after every active operation, and if you notice a detachment, it's easier to remove them immediately, as long as the area of damage is minimal, and keeping the boat deflated at room temperature prolongs the life of adhesives.
Operation and performance
Conduct Armor 320 SC The water is directly dependent on the installed power of the engine and load distribution. With a 5 hp engine, the boat confidently enters the planing mode with one adult, developing a speed of about 20-22 km / h. When installing the engine 9.9 hp, the speed increases to 30-32 km / h, but the control becomes more demanding to the skills of the steering.
Manageability by low-speed It is rated good by owners, thanks to the round shape of the bow, which effectively cuts through the wave. However, when driving against a strong wind or a large wave, you can experience sailing, which is characteristic of all high-sided inflatable boats. kielson or additional accessories, if the design allows.
- 🚤 Minimum speed for plane: about 18 km / h.
- 🚤 Maximum recommended engine power: 10-12 hp
- 🚤 Fuel consumption on planing: approximately 2.5-3 l / h (depends on the engine).
- 🚤 Comfortable speed for fishing: 8-12 km / h.
An important aspect is seaworthinessThe boat can feel confident in the wave to 0.5-0.7 meters, but if you exceed this height, there is a risk of splashing, especially if there are two people in the boat. The design of the splasher partially solves the problem, but the completely dry cockpit is preserved only in calm or when traveling in a tail wave.
⚠️ Note: Do not exceed the maximum permissible power of the motor specified in the data sheet, as this can lead to a transone break and an emergency on the water.
The optimal engine power for armor 320 SC with two passengers - 9.9 hp, which provides a confident plane and traction reserve.
Assembly, installation of equipment and tuning
Assembly process Armor 320 SC It takes an average of 15 to 20 minutes with experience, and about 30 minutes for a beginner, and the first thing you do is to spread the boat out on a flat surface, clear the sand and debris, and then pump the cylinders to the working pressure. gauge necessarily, since pumping in the heat can lead to rupture of the seams, and non-pumping - to deformation of the bottom.
Installation jar And the stringers require care: stringers are inserted into pockets at the bottom, and then the bottom is inflated (if it's inflatable) or the bottom is fixed hard. Banks are attached to the lyctroses with special fasteners, which allows them to adjust their position along the cockpit as needed, which allows you to shift the center of gravity for optimal differentiation.
☑️ Pre-launch checks
Tuning of this model often begins with installation transom-wheelIt's a very simple way to move a boat around the shore in a assembled form. sonar It's a can or a side, which requires careful wire-laying, and many owners replace their regular handles with more comfortable ones, or add additional gear mounts.
Recommended cylinder pressure: 0.20 - 0.25 Bar (200-250 mB)
inflatable floor pressure (BBHP): 0.15 - 0.18 Bar
And we must not forget that anchor-roamThe standard attachment may not be sufficient to hold it firmly in a strong current, so installing an additional anchor assembly in the bow is a reasonable solution. All additional elements must be attached so that they do not create friction points against the cylinder when moving.
Lubricate the valves with silicone lubrication once a season - this will prevent them from sticking and ensure tightness during pumping.
Care, storage and repair
Durability Armor 320 SC It depends on how you care for it after each fishing trip. After using the salt water, the boat must be rinsed with fresh water to prevent the crystallization of the salt in the fabric and corrosion of the fittings. Mud and silt should be washed off with a soft sponge, avoiding the use of abrasive cleaning products.
Suit Even a small amount of moisture inside a rolled-up boat can cause mold and a bad smell that is almost impossible to remove, and dry the product in the shade, as direct sunlight on the inflated boat can lead to thermal expansion of the air and damage to the seams.
- ☀️ Store in a dry room at a temperature of -20 to +40 C.
- 🧼 Wash with warm water with soapy solution.
- 🛡️ To treat with protective compounds for PVC once a year.
- 🔍 Regularly check the valves for leakage.
In the event of an appearance puncture You can repair it yourself with a remix, clean it, degrease it, and patch it with the same cloth using a special glue, and let the glue fully polymerize (usually 24 hours) before using the boat.
⚠️ Warning: Never keep the boat rolled up immediately after water - be sure to dry all the folds and seams, otherwise the fabric will start to rot from the inside.
Comparison with competitors and final conclusions
In the face of competitors such as Flagship, hunter or Mev.model Armor 320 SC It stands out for its affordability while maintaining basic reliability specifications, which may be inferior to top models as fittings or fabric density, but for seasonal use and amateur fishing offers an excellent balance of price and quality.
The main advantages are the simplicity of construction, the presence of a rigid transom in the basic configuration and good maintainability. The disadvantages include the average weight assembled and the need for careful drying after each use, which is typical for most PVC boats in this class.
In summary, it can be said that Armor 320 SC It is a reliable workman for those who are looking for the first serious boat or a backup option for trips to the nearest water bodies, and with care it will last many seasons, providing a comfortable rest on the water.
Armor 320 SC - the best choice for beginners and amateur fishermen who appreciate the ratio of price and functionality.
Frequently Asked Questions (FAQ)
How many people are comfortably accommodated in the 320 SK Armor boat?
The optimal load is two adults of average size, three people fit, but they're tight, and they're almost fully utilized, which reduces driving performance and safety.
Can I use this boat in the winter?
Use at subzero temperatures is possible, but requires extreme caution: PVC fabric in the cold tans and becomes brittle, so any impact on the ice or sharp objects can cause rupture.
Which motor is better for this boat?
For one fisherman with minimal equipment enough 5 hp For two and a full exit to planing with a power reserve, the ideal choice will be a 9.9 hp engine More powerful engines are not recommended due to transom limitations.
How long does the boat dry after fishing?
In warm sunny weather, the boat dries for about 1-2 hours. In cloudy or wet weather, the process can take 4-6 hours or more. It is important to make sure that moisture is not left in the folds of the bottom and under the stringers.