PVC Boats Ermak Russian fishermen and tourists have long gained the trust of their customers due to the optimal combination of price, quality and adaptation to local operating conditions. Ermak-Neva LLC (St. Petersburg), produces swimming facilities since 2003, specializing in the small-sized PVC-reinforced vessels And they have reinforced seams and original designs, and unlike the Chinese, they have boats. Ermak They are designed taking into account Russian realities: cold water, rocky shores and the need for off-road transportation.

Today, the model range includes more than 20 modifications - from compact single-seat hunting boats spaciously five-seat family options The brand feature is that all boats are certified. GIME They meet the requirements for registration of boats up to 20 hp (with an engine). technicalityCompare the popular models, we will reveal hidden flaws (which are silent sellers) and give practical tips for operation - from storage in winter to repair punctures in the field.

Who's the boat for? Ermak?

  • 🎣 Fishers - due to the stability and the ability to install a sonar.
  • 🏕️ Tourists. Due to the ease of transportation and assembly.
  • 🚤 Hunters. - models with camouflage color and silent movement.
  • 👨‍👩‍👧‍👦 Families. - Spacious options with an inflatable keel for comfortable walks.
📊 What are you planning to use a PVC boat for?
Fishing
Hunting
Family holidays
Tourism/hiking
Another option

1. The design of boats Yermak: what hides the technical specifications

The main material is reinforced PVC density of 750-1,100 g/m2 (depending on the model). It is not the same PVC as in Chinese boats.: the manufacturer uses polyurethane-coated, which is resistant to UV radiation and temperature changes from -30 ° C to +60 ° C. However, there is a nuance: in budget models (for example, Ermak 220PVC is thinner. 650 g/m2This requires more careful handling when in contact with sharp objects.

All the boats of the brand are equipped glued (not welded!), which is considered a more reliable solution for Russian conditions, but here it is important to understand: The adhesive used by Ermak loses elasticity at temperatures below -15°C, which is critical for winter fishing in northern regions.If you plan to operate the boat in the cold, be sure to check the seams for microcracks before each exit.

The bottom in most models. squirt-inflatableThe exception is the series. Ermak Pro and Yermak Luxwhere used aluminum-plain This increases the weight of the boat by 10 to 15 kg, but increases stability when turbulent.

Key design elements:

  • 🔹 transom board - reinforced, withstands engines up to 15 hp (in models) Ermak 320 and above.
  • 🔹 keel Inflatable or rigid (in premium series), improves handling.
  • 🔹 Leera. - sewn around the perimeter, with loops for fastening the cargo.
  • 🔹 Valves. - Boston type (fast removable), but in models until 2022 of release, less reliable "fungal valves" were used.
⚠️ Attention: In boats. Ermak The 2020-2021 release was a defect of valves - they could spontaneously blow air when heated in the sun. The problem is solved from 2022, but when buying a used boat, be sure to check the leakage!

The brand’s model range is divided into 4 series: Standard (budgetary), Pro (reinforced), Lux (premium) and Hunter Here is a comparative table of the most popular boats:

Model Length, m Load capacity, kg Max, engine power, hp. Weight, kg Price, rub (2026)
Ermak 220 2.2 250 3.5 18 28 000
Ermak 280 Pro 2.8 400 10 32 55 000
Ermak 320 Lux 3.2 500 15 45 89 000
Ermak Hunter 360 3.6 600 20 58 112 000

For fishing on lakes and rivers without strong currents optimally Ermak 280 Pro - it accommodates 2-3 people with equipment and can withstand the engine up to 10 hp If you need a boat for the seafishingbetter to consider Ermak 320 Lux with a hard bottom and reinforced cylinders.

Model Hunter 360 - specialized hunting solution: she has camouflageIt has silent oars and reinforced splashers, but its weight (58 kg) makes it difficult to transport without a trailer.

Should I Overpay for the Series? Lux?

  • ✅ Yes, if you plan to. long-run (reinforced fabric, aluminum flooring).
  • ❌ Not if you need a boat for periodical (A price difference of up to 30% is not justified).

Seams for lack of stratification

Valves for tightness (bleed and lubricate with silicone)

Completeness (pump, oars, repair kit)

Documents (boat data sheet, GIMS certificate)

-->

Motors for boats Ermak: compatibility and nuances of installation

All boats. Ermak Certified for motor installation, but there are tight power limits:

  • 🛥️ Up to 2.5 m, maximum 3.5 hp (for example, Honda BF2.3 or Mercury ME 3.3).
  • 🛥️ 2.8-3.2 m - up to 10-15 hp. (optimally) Yamaha F9.9 or Suzuki DF9.9).
  • 🛥️ From 3.6 m to 20 hp (Registration with GIMS is required).

Important point: cross-board boated Ermak has tilt angle 15°This is not suitable for some Chinese engines (for example, for the HDX or HangzhouCheck compatibility before buying, and note that The weight of the motor should not exceed 40 kg - or the transom may deform.

When installing the motor, you need to:

  1. Strengthen the transaxboard plywood (If the boat is not hard bottomed)
  2. Use it. shock-plate To quench the vibrations.
  3. Check in boat-balancing The motor should not lift the nose above 5°.
⚠️ Attention: In boats. Yermak Standard (without a keel) a motor more powerful than 5 hp causes a strong "sniffing" vibration at high revs. keel (cost ~3,000 rubles).

For electric motors (e.g. Minn Kota Enduraboats Ermak They're perfect, because they're light and maneuverable. battery weighing more than 20 kg shifts the center of gravityIt is better to place it closer to the nose.

4. Operation and Storage: How to Prolong the Life of a Boat

Boat life Ermak With proper care, 8-12 yearsPVC's main enemies:

  • ☀️ Ultraviolet - destroys the structure of the material.
  • 🧊 Frost below -20°C - makes PVC fragile.
  • 🛢️ Fuel and oils - corroding the protective coating.
  • 🐭 Rodents - can chew through cylinders when stored in the garage.

Storage rules:

  1. After each use wash the boat with fresh water (especially after the sea water).
  2. Dry in pieced in the shade, avoiding direct sunlight.
  3. For long-term storage (winter) powder inside surface of cylinders.
  4. Store at temperature 0°C to +25°C In a suspended state (not on the floor!).

What to do if the boat Ermak frozen in winter?

What to do when the boat freezes

If PVC becomes brittle (cracks when bending), warm the boat in a warm room (no closer than 1 m to the heater!) for 12-24 hours. Do not inflate immediately - let the material regain elasticity. After warming up, treat the seams PVC-specific (for example, Bostik 2402 or Clayberg 5000).

Use it for transportation. soft-case (not included!) or pulp This will protect you from abrasion when you're on the roof of your car. foldedAvoid sharp excesses - this can damage glue stitches.

💡

Before winter storage, treat the valves with silicone lubrication (for example, WD-40 Specialist) will prevent them from "filling" and will facilitate pumping in the spring.

5. repair of boats Yermak: step-by-step instructions

Even the strongest boat can get damaged. typical and how to deal with them:

1. Puncture or cut of the cylinder

  • 🔧 Materials: PVC patch (included in the repair kit), glue Clayberg 5000solvent 646.
  • 🔧 Instructions:
    1. Clean and degrease the damage site.
    2. Apply glue on the patch and balloon, withstand 5-7 minutes.
    3. Press the patch tightly (use a roller or heavy object).
    4. Do not operate the boat for 24 hours!

    • 2. Separation of the seam

    It's the hardest break. If the seam diverges, more than 5 cmI'd rather put the boat in service.

    1. Clean the seam with sandpaper (grain 120).
    2. Put the glue on. Bostik 2402 2 layers at intervals of 10 minutes.
    3. Squeeze the seam with strubs for 12 hours.

    3. Leak through the valve

    The problem is often worn-outThe solution:

    • 🔧 Buy a valve remake (article for the Ermak — EK-V001).
    • 🔧 Lubricate the new gasket with silicone before installation.
    ⚠️ Attention: Never use it to repair PVC boats. superglue Also avoid cyanocrylate-based glue (e.g., Moment.).

    If the damage is severe (for example, 10+cm cylinder torn), contact the authorized service ErmakIn St. Petersburg and Moscow, they operate. warranty workshopswhere repairs are cheaper than in third-party services.

    💡

    The most common reason for depressurization of boats Yermak - improper drying. Never fold the boat wet and do not keep it in a compressed state for more than 2 weeks!

    6. Owner reviews: pros and cons of boats Yermak

    Analyzed over 200 reviews in forums (FishHunting, BoatPlace) and in VKontakte groups, we have highlighted Real advantages and disadvantages boat-boat Ermak:

    Pros (according to users):

    • ✅ Price/quality - cheaper than analogues (Flagship, corvette) with comparable specifications.
    • ✅ Sustainable - due to wide cylinders and low center of gravity.
    • ✅ Repairability Spare parts and glue are easy to find in Russia.
    • ✅ GIMS is no problem. All models are certified, documents are issued quickly.

    Cons (which the sellers are silent about):

    • ❌ Weak oars - aluminum blades bend under a strong load (it is recommended to buy composite immediately).
    • ❌ Thin PVC in budget models — Ermak 220 and 240 They're punctured by sharp stones.
    • ❌ Uncomfortable seats - in the basic configuration there are no backs (you have to buy separately).
    • ❌ Valve problems in the 2020-2021 parties (see section 1).

    The recall of fisherman (Novosibirsk, Ermak 280 Pro3 years of service:

    "The boat is perfectly holding the wave at the Ob reservoir, but after two seasons, the seams at the transom began to peel off. Kleiberg I saved it. Tohatsu 9.8 pulls without problems, but at full power the nose lifts - I had to put an additional keel.

    Review of the hunter (Khabarovsk, Ermak Hunter 3601 year of service:

    "Camouflage really works -- you can't see the boat from the shore. But 58 kg is a nightmare for taiga transportation. I had to make a cart-wool. Another minus: in the extreme cold (-25 ° C), PVC blubs, you have to warm up with a hairdryer before assembly."

    7. Alternatives to Yermak boats: a comparison with competitors

    If you have not yet decided on a choice, compare Ermak with other popular brands:

    Characterization Ermak Flagship corvette Honda Marine
    Price (model 2.8-3.2 m) 45 000–70 000 50 000–80 000 60 000–95 000 80 000–120 000
    Density of PVC, g/m2 750–1100 900–1200 850–1100 1100–1400
    Guarantee, years. 2 3 2 5
    Service centres 15+ in Russia 20+ 10+ Official dealers

    When to choose Ermak:

    • 💰 You need it. budgetary It's very maintainable.
    • 🏗️ Important. ease of registration in GIMS.
    • 🛠️ You're ready. self-care behind the boat (glue, clean).

    When to choose an alternative:

    • 🌊 For seafishing better Honda Marine (more durable PVC).
    • ⚡ For extremes (thresholds, rocks) corvette with a hardened bottom.
    • 🕒 If you need it. maximum service life — Flagship With a 3-year warranty.

    8 Where to buy a boat Yermak: official dealers and checked shops

    The official website of the brand is [ermak-boat.ru] (https://ermak-boat.ru), but buying directly is not always profitable (prices are often inflated).

    Official dealers (guarantee 2 years):

    • 📍 St. Petersburg: "Ermak-Neva" (11 Sedova St.).
    • 📍 Moscow: "BoatMaster" (Tushinskaya, Svoboda Street, 35).
    • 📍 Yekaterinburg: UralBoat (100 Repina St.).

    Checked online stores:

    • 🛒 KupitLodku.ru - there are often discounts up to 15%.
    • 🛒 BoatMarket.ru A large selection of used boats with a guarantee.
    • 🛒 Ozon/Wildberries - only new models, but without the possibility of test drive.

    Average prices for new boats Ermak 2026:

    • 💵 Ermak 220 — 28,000-32,000 rubles.
    • 💵 Ermak 280 Pro — 55,000-65,000 rubles.
    • 💵 Ermak 320 Lux — 89,000-98,000 rubles.

    When buying a used boat, pay attention to:

    1. Release year (models up to 2020 may have valve problems)
    2. The condition of the seams (splintering, cracks).
    3. Availability of documents (passport of the boat, act of GIMS).
    ⚠️ Attention: There are many fake brand names on the market. Ermak - especially models 220 and 240The original is different.
    • 🔹 Serial number on the transom (starting with ERM-).
    • 🔹 Hologram on the boat's passport.
    • 🔹 The inscription "Made in Russia" on the cylinder.

    FAQ: Frequent questions about Yermak boats

    ❓ Do I need to register the boat Yermak in GIMS?

    Yes, if you plan to install a more powerful engine 5 hp or operate the boat on navigableRegistration will require:

    • boat data sheet.
    • Receipt of payment of the state duty (800 rubles).
    • A document confirming the ownership.

    The procedure takes 5-7 working daysBoats. Ermak They are already certified, so there are no problems with registration.

    ❓ Can I use the boat Yermak in winter?

    Yes, but with reservations:

    • 🔹 Operating temperature - not lower -15°C (Otherwise, PVC loses its elasticity).
    • 🔹 After each trip Dry the boat in a warm room.
    • 🔹 Use it. valve-grease (for example, CRC 5-56).

    For winter fishing, it is better to choose models from reinforced PVC 1100 g/m2 (for example, Ermak 320 Lux).

    ❓ Which pump is better for the boat Yermak?

    Best options:

    • 🔹 Hand pump: Bravo BS-12 (It comes with a set but slow).
    • 🔹 Scissor pump: Sevylor Foot Pump (convenient for quick pumping).
    • 🔹 Electric pump: Intex 68609 (It takes 5 minutes but requires a battery.)

    For boats. Ermak cylinder-volume more than 0.5 m3 The hand pump is not suitable - pump too long.

    ❓ How many people can the boat Yermak 280 Pro hold?

    Official load capacity. 400 kgwhich corresponds to:

    • 👥 3 adults (80 kg) + equipment (up to 60 kg).
    • 👥 2 people + motor 10 hp + battery + box with fish.

    Important: When fully loaded boat-head liftsIt is recommended to distribute the load evenly or install an additional keel.

    ❓ Can I paint the boat Yermak?

    Yeah, but only. PVC-ink (for example, Polyflex or FlexaneOrdinary paint or aerosols will destroy the material!

    Painting instructions:

    1. Clear the surface. solvent 646.
    2. Apply a primer for PVC (for example, Plasti Dip).
    3. Paint in 2 layers at intervals of 4 hours.
    4. Do not operate the boat for 48 hours!

    Camouflage painting is better to order from the manufacturer (option costs ~ 5 000 rubles).