Choosing a first or new swimmer is always about finding a balance between cost, reliability and functionality. Flink 320 It stands out as one of the most popular options for fans of fishing and family holidays, and potential buyers are primarily interested in the real specifications, the current price and how justified it is to buy this model in the current conditions.
Many beginners mistakenly believe that all boats with a length of 3.2 meters are the same. design This article will take a look at what's behind the 320 marking, what material is on board, whether the engine fits and whether you should pay for the brand, and give you a comprehensive look at what's behind the 320 marking, what material the board is made of, whether the design will withstand the engine installation and whether you should overpay for the brand.
And it's worth noting that the model's popularity is not only due to its accessibility, but also because it's versatile, and whether it's a quiet fishing trip on the lake or a beach, that size is considered the middle ground. Let's dive into the technical details to see what you get for your money.
General specifications and design features
The basis of any inflatable boat is its balloonIn the model. Flink 320 The classic scheme is two inflated cylinders separated by safety bulkheads, which means that even if one of the compartments is damaged, the vessel will remain afloat, which is critical for the safety of the crew, with a diameter of 36 cm, which ensures sufficient load capacity and stability in calm water.
The body is made of reinforced PVC material This is a standard indicator for the budget and mid-size segment, which guarantees resistance to punctures, ultraviolet radiation and temperature changes. However, it is worthwhile to understand the difference between the declared density and the real quality of the fabric, since these parameters can vary from manufacturer to manufacturer.
- 🚣 Dimensions: The full length is 320 cm, the width is 140 cm, which allows you to comfortably accommodate two, and if necessary, three adults.
- ⚓ Load capacity: rated carrying capacity is declared at 380 kg, which includes the weight of passengers, equipment and the engine itself.
- 🛡️ Safety: The presence of independent inflatable compartments and reinforced linings in areas of friction significantly increases the reliability of operation.
⚠️ Warning: Do not overload the boat beyond the specified load capacity. Exceeding the limit even by 20-30 kg can lead to loss of controllability and lowering the height of the board above the water, which is dangerous in conditions of excitement.
The transmunz design also deserves a special mention, and in this model it is usually removable, made of water-resistant plywood coated with varnish, which makes it easy to dismantle it for transportation or storage, and also reduces the overall weight of the boat when assembled, and the attachment of the transmunz to the cylinders is made according to a reliable scheme, which prevents its spontaneous displacement under the load of the engine.
Boat bottom: inflatable or paioles?
One of the key issues in the selection Flink 320 Depending on the modification and year of manufacture, the buyer may face two main options: an inflatable floor of NDNDD (low pressure) or a hard bottom of aluminum or plywood floorboards. operational advantages disadvantages that directly affect the comfort of use.
The inflatable floor models (NDD) have excellent maneuverability You can kneel or even lie down without feeling the hardness of the overpack, and it's inflated at the same time as the cylinders, which speeds up the preparation for the launch, and it takes up less space and less weight when folded, which is important for hiking tourists.
In turn, modifications with plywood or aluminum sleighs provide a more stable position on the water. Hard bottoms allow you to stand more confidently during spinning throw or catching large fish. However, it takes longer to assemble such a boat, and in winter the plywood can become more fragile, requiring careful attitude.
What is the secret to the reliability of seams?
Current PVC gluing technologies use two-component glue and hot vulcanization, which creates a monolithic compound that often exceeds the strength of the material itself, and breaking the seam in a quality boat is almost impossible in normal operation.
The choice between these two types depends on your priorities. If you want maximum compactness in the trunk of a car and speed of assembly, choose NDND. If you plan active fishing with frequent trips on the boat and you want maximum hull rigidity, look for the sleigh version.
Motor power and speed performance
The issue of installing the engine is critical for many owners. Flink 320 It is important to understand the limitations, dictated by the design of the transom and the general geometry of the hull. Exceeding the recommended power can lead not only to transom failure, but also to dangerous yaw of the vessel at speed.
The optimal power of the engine for this model is considered to be a range of 2 to 5 horsepower. Two-strong engines will provide a quiet movement against the current or wind, allowing you to get to the fishing point without excessive rowing. Motors with a capacity of 3.5-5 hp will allow you to reach speeds up to 15-20 km / h with one passenger, which is already quite comfortable for walks.
- 🚤 2 hp: ideal for quiet running, economical, easy to transport, but will not allow plane with full load.
- 🚀 3.5 - 5 hp: provide access to planing with one person, give a reserve of power to overcome the wave.
- 🛑 More than 6 hp: Installation of motors of such power on the body of 320 cm is not recommended due to the risk of loss of stability and damage to the transom.
For a boat of this size, heavy four-strokes can be overweight, shifting the center of gravity and loading the transom. Lightweight two-stroke engines made in China or Japan will be the most rational choice, providing a balance between thrust and weight.
Use an anti-cavitation stove or a low-power hydraulic lift, a small fixture that will help the boat get to the plane faster and improve handling at high speeds.
Package and additional accessories
Buying. Flink 320It's important to pay attention to what's in the basic package. Manufacturers often offer different versions, from minimalistic "boat in a bag" to extended "turnkey" kits. The availability of certain items in the kit can depend on the total amount of your purchase, as it is often more expensive to buy additional accessories separately.
The standard kit usually includes the boat itself, a removable transom, a packing bag, a pump and a remix. However, in more expensive trim levels, you can find comfortable inflatable seats (banks), safety ends, perimeter liner cable and even holders for rods. The presence of a liner cable is especially important, since it can be grabbed in the event of falling overboard or for mooring.
The quality of the pump is also worth special attention. The kit often comes with foot or hand pumps, which require considerable effort to pump. For comfortable operation, it is strongly recommended to get an electric pump with appropriate adapters, which will allow you to prepare the boat for the water in 5-7 minutes without physical exertion.
| Element of equipment | Standard version | Extended version | Importance |
|---|---|---|---|
| Pump | Hand/Shot | Electric (optional) | High. |
| Siedenia | Plywood cans | Inflatable sliders | Medium |
| Bag. | There. | There (enhanced) | High. |
| Remake | Basic | Extended + glue | Critical |
Comparison with competitors and price segment
In the Russian market Flink 320 It competes with brands such as Flagship, Master. and hunterFlink's main advantage often lies in a more affordable price while maintaining acceptable materials quality. While competitors may offer a denser PVC or more complex bottom design, Flink benefits from simplicity and maintainability.
Boat price. The flink 320 varies by region, currency rate and configuration, and on average, it is one of the budget options in the 3.2 meter class. However, the savings during the purchase phase should not be an excuse to ignore the condition of the seams and valves when accepting goods. Cheap models sometimes sin with a defect of fittings, which is easy to detect when first inflated.
⚠️ Note: When buying, pay attention to the date of production. PVC material has the property of “aging” even in warehouse, so a boat that has been in its packaging for 5 years may require a more thorough leakage check.
In the long term, if we look at the possession This model is low because of the availability of spare parts, and the trunks, seats and remixes for boats of this size are unified and sold in most fishing shops, which makes it easier to maintain in the future.
☑️ Checking the boat before buying
Rules of operation and storage
And The flink 320 has served you for many years, you need to follow a number of simple but important rules. PVC material does not like extreme temperatures and sharp objects. Storage of the boat in a deflated state should occur at a temperature of not lower than -15 ° C and not higher than +40 ° C, in a dry room protected from rodents.
After each operation, especially in salt water or in contaminated water bodies, the boat must be thoroughly washed with fresh water and dried. moisture left in the folds of the material can lead to mold or an unpleasant odor that is later difficult to remove. Dry the boat better in the shade, avoiding direct sunlight, which can accelerate the degradation of plastic.
- 🌡️ Temperature: Do not leave a fully pumped boat in the sun, the air pressure inside can rise and damage the seams.
- 🧼 Gone: Use only soap solutions for cleaning, avoid aggressive chemicals and solvents.
- 🔧 Transport: When transported in the trunk, cover the boat with a dense cloth to protect against dust and possible mechanical damage.
Regularly checking cylinder pressure is another safety feature: Before each outlet, make sure all compartments are inflated to the recommended state (usually 0.2 atm), and underpressure reduces structural rigidity and increases the risk of damage to the bottom of rocks or driftwood.
Proper storage and regular care of PVC materials increase the life of the boat by 2-3 times, maintaining its elasticity and tightness for many seasons.
Frequently Asked Questions (FAQ)
Can you take the Flink 320 boat to the wave?
Waves are possible, but with limitations. inflatable tubes make the boat well cushioned. However, because of its short length (3.2 m) and relatively flat bottom, it can start to peck noses or get hit by water at high wavelengths. It is recommended that it only travels to experienced users and not exceed a safe speed.
Which glue is best for PVC repair?
For repairing PVC boats, it is best to use specialized two-component polyurethane adhesives (for example, "Radical", "Textolith" or original manufacturers' adhesives). Conventional household adhesives may not provide the necessary elasticity of the seam, which will constantly deform on water.
How long does it take to assemble and disassemble a boat?
With experience and the use of an electric pump, assembly takes about 10-15 minutes. Disassembly and packaging in a bag can take 20-30 minutes, as it takes time to blow out the cylinders and fold properly to fit the boat into the transport bag.
Will the boat fit in the trunk of the sedan?
Most of the time, yes, in a deflated and packaged boat bag. Flink 320 It has dimensions of about 90x45x35 cm This allows you to place it in the trunk of most sedans and hatchbacks, especially if you fold the rear seats or remove the shelf.