Small inflatable vessels are in stable demand among fishermen and hunters who value mobility. PVC boat Murena 270 This is a classic example of a low-cost solution for calm water, and its compact dimensions allow it to be transported in the trunk of a passenger car, which is a critical factor for many owners.
In this article, we will discuss in detail the design, materials and performance of the model. Murena 270 It's often chosen as the first boat by beginners, but experienced watermen sometimes look for this format for short trips, and understanding the real possibilities will help avoid frustration during operation.
The manufacturer is positioning the product as a universal tool for all types of water bodies. bottom (DDND) imposes its own limitations on performance, so let's see if it's worth buying in today's environment.
Design features and materials
The body is based on a five-layer reinforced polyvinyl chloride, with a fabric density of 750 g/sq.m., which provides a balance between strength and weight, and the seams are made by latent methods, which ensure that the joints are tight even with prolonged exposure to moisture.
The cylinders are divided into independent compartments, each of which has its own valve. safety-net It allows you to stay afloat even if you damage one of the cylinders, and there's a liner cable in the bow for easy mooring and towing.
⚠️ Attention: When pumping cylinders, strictly monitor the pressure gauge. Excess pressure in hot weather can lead to rupture of the seams or deformation of the structure.
The bottom of the boat is made of the same material as the side, but it has a reinforced structure, and inside there are longitudinal stringers that give stiffness, which avoids the hammock effect, where the center of the bottom sags under the weight of passengers.
To prolong the life of the fabric, treat it with special UV sprays after each prolonged sun exposure.
Dimensions, weight and passenger capacity
Model range Murena The 270 is a total length of 270 centimeters, the width of the cockpit is 128 cm, which is the standard for double vessels of this class, and the height of the board is 34 cm, which is enough to protect against splashes, but requires caution in case of heavy chop.
The weight of the kit in the assembled form varies depending on the configuration, but usually does not exceed 22 kg. This allows you to carry the boat to one person, although it is better to act together with the engine and equipment. Load capacity The payload is 220 kg, but the actual payload is less.
| Parameter | Meaning | Comments |
|---|---|---|
| Total length | 270 cm | Standard for 2 seats |
| Width | 128 cm | Parking stability |
| Weight (body) | ~20 kg | No motor or gear. |
| Max, load. | 220 kg | Including boat weight |
When calculating the crew, you need to take into account the weight of the engine and fuel. If you plan to take two adult passengers, space in the cockpit will be limited, the optimal configuration is one adult angler with a full set of gear or two children / adolescents.
Setup and execution options
Customers often face the choice between the basic version and the extended version, including the boat itself, two seats (banks), a bag-pack, a remix and a passport, but this is often not enough to fully operate.
There are modifications to the hard-floorboard It's made of plywood or aluminum, but it's less common and heavier. Most size 270 models have an inflatable floor for maximum compactness. The presence of a transom plate can also vary.
- 🎣 Fishing version: often complete with holders for rods and anchor snails.
- 🚣 Rowing version: can be supplied without a transom for an outboard motor, only with switches.
- 🛡️ Enhanced version: has additional keel protection and denser fabric.
When ordering from online stores, carefully review the list of investments. Sometimes the "full package" does not include a pump or oars, and you have to buy them separately, which affects the total cost of ownership.
Hidden nuances of the complete set
In some batches, the transom plate may be thinner than the declared one, check its rigidity when receiving.
Motor installation and driving performance
The power selection unit is especially acute for compact boats. Murena 270 The recommended power of the engine is 2 to 5 horsepower, and the installation of a more powerful unit is prohibited for safety reasons.
With a 2 hp engine, the boat develops a speed of about 6-8 km / h. This is enough to move around the water area and reach the catching point. The five-powered engine will accelerate to 12-14 km / h, but the control will become more nervous due to the short length of the hull.
⚠️ Warning: Never exceed the recommended power of the motor. A short body with excessive traction can enter uncontrolled dolphinia (nasal yaw), which is dangerous for passengers.
The slab is normally adjustable, allowing you to change the angle of the engine, which is important for compensation for the different. When moving against the current or wave, the boat behaves confidently, but the sailing of the high sides requires accuracy in lateral wind.
The optimal motor for the Murena 270 is a two-stroke 2-3.5 hp with a short leg, which will provide a balance between speed and handling.
Assembly, storage and maintenance
The process of preparing for the release takes 10-15 minutes, first the cylinders are inflated to the working pressure, then the bottom. It is important to observe sequence to avoid distortions of the structure. Use a foot or hand pump to pump.
After operation, the boat must be washed with fresh water, especially if it was used in salt water or muddy rivers. Mud and sand are abrasive and can damage the protective layer of PVC during prolonged storage.
- 💧 WashingUse a soft sponge and neutral detergents.
- 🌡️ Suit: Spend in the shade, avoiding direct sunlight on wet fabric.
- 📦 Packaging: fold carefully, trying not to make crevices in the same places.
Store the product in a dry room at a plus temperature. Frost makes PVC fragile, so winter storage on an unheated balcony is unacceptable. (regular inspection) of seams and valves will help to identify minor defects before going to water.
☑️ Checklist after fishing
Comparison with competitors and final verdict
There are many analogues on the market from brands like Flinc, hunter or barkThe 270 moray is priced favorably, but may be inferior in seat ergonomics or fittings. Competitors often offer wider cockpit or reinforced transes as standard.
The main advantage of the model is its accessibility and simplicity, which is a workhorse for those who are not willing to pay too much for brands, but if you plan frequent outings with a full load, it is worth considering models from 290 cm in length.
In summary, it can be said that PVC Murena 270 It's a good choice for beginners or as a backup, and it's not without the disadvantages of the budget segment, but it does its basic function properly.
What is the maximum permissible weight of the engine for this boat?
The manufacturer recommends installing motors with a capacity of up to 5 hp However, for comfortable and safe operation with one person, the optimal motor is 2-3 hp More powerful engines can overload the transom and make the control unstable.
Can we use this boat on the current?
Yes, but with limitations, because of the inflatable floor and the light weight, the boat has good cross-country ability, but because of its short length (2.7 m) and high side, it is sensitive to side waves and strong winds, and it requires fast-flowing experience.
Do I need to dry the boat before each folding?
Ideally, yes. If you fold a wet boat, you create a greenhouse effect inside the bag, which causes mold and bad smell, and if you can't dry it completely, at least wipe the cloth thoroughly and unpack the boat as soon as you can at home.
Is it really possible to put a boat in the trunk of a sedan?
Yes, folded, the 270 Mourena Boat Bag is compact (approximately 80x40x30cm) and fits easily in the trunk of most sedans and hatchbacks, one of the model’s key advantages over hard-bottomed boats.