Choosing a boat for fishing or a family holiday on the water always involves trade-offs between price, quality and functionality. In the domestic inflatable vessel market, the brand in question has established itself as a provider of affordable solutions that can withstand the harsh realities of operation. PVC boat monsoon It is often the first major acquisition for beginners looking for a balance between cost and reliability.
The St. Petersburg-based manufacturer uses modern gluing technologies and high-quality materials to build vessels that can withstand heavy loads. Unlike many competitors, the company relies on time-tested cylinder and bottom designs, minimizing the number of potential failure points.
In this article, we will discuss in detail the model range, technical features and nuances of the operation of these vessels. reinforced PVC A certain density becomes a key factor in durability, and how to choose the right motor for a particular case.
Design features and materials of production
The basis of any inflatable vessel is the material from which its cylinders and bottom are made. reinforced PVCIt's highly resistant to UV, fuel and mechanical damage, and it varies in density from model to model, but even in basic versions, it's good enough to go out on water.
The most important element of the design is the way the elements are connected, and the method of hot gluing with two-component polyurethane adhesive is used, which ensures that the seams are sealed for many years. Thermoshyms They are not afraid of temperature changes and retain elasticity even in cold weather, which is critical for operation in northern latitudes.
⚠️ Attention: When buying, be sure to check the quality of gluing the seams visually - they should not be bloated, unpatched areas or protruding threads of the reinforcing mesh.
The design of the bottom deserves special attention, depending on the model, it can be made of plywood coated with reinforced PVC or be an inflatable floorboard made of drop-stitch fabric. inflatable floor High pressure (HDND) allows you to assemble the boat faster and gives it excellent driving qualities, approaching the specifications of a rigid hull.
Drop-stitch technology
The drop-stitch technology is that the top and bottom surfaces of the inflatable element are connected by thousands of strong threads. This allows you to pump the bottom to a pressure of 1 atmosphere or more, making it rigid like plywood, but also light and compact in a rolled-up form.
Overview of popular models and their modifications
The manufacturer's range is quite wide and covers the needs of both solo fishermen and small companies. Monsoon 2 or Monsoon 2.6These are classic rowing boats or low-power electric motor vessels, which are of minimal weight and compactness in their transport state.
For fans of active fishing using a gasoline engine, the best choice will be the series models. Monsoon 2.9 and Monsoon 3.2These vessels are already equipped with a full-fledged transcrete for the engine hinge and have a more complex bottom design to ensure stability on the wave, the increased load capacity allows you to take on board the necessary equipment and trophies.
- 🚣 Monsoon 2.0 - the ideal solution for quiet fishing in small ponds, accommodates one person with a minimum set of gear.
- 🎣 Monsoon 2.6 M - universal model with the ability to install a motor with a capacity of up to 3.5 hp, suitable for two.
- ⚓ Monsoon 3.2 Rib - a full-size vessel with a rigid fiberglass bottom, designed for serious loads and powerful engines.
Separately, it is worth highlighting the line of RIBs (inflatable boats with a hard bottom). Rigid fiberglass bottom In these models, not only does it increase the speed of plane, but it also makes you feel confident in the presence of a wave, which is often chosen by professional anglers and rescue services.
Driving qualities and controllability on water
The boat's handling depends on the shape of the cylinders and the design of the bottom. keel Or NHDDs are very stable and they're more likely to go plane, and the round shape of the nose is good for the wave, which reduces the risk of splashing the cockpit.
When using outboard motors, it is important to distribute the weight of the load correctly, and the shift in the center of gravity affects the different and, as a result, the maximum speed and fuel consumption. transom plates or their imitation in the form of transector amplification help to adjust the angle of inclination of the engine to achieve optimal performance.
In quiet water, these vessels behave predictably and sustainably. However, when entering open spaces with wind and wave, there is a difference between flat-bottomed and keel-bottomed models. Keel-bottomed versions are better at cutting the wave, while flat-bottomed ones can significantly slap at speed, requiring the operator to pay more attention.
To improve driving performance and reduce water resistance, regularly treat the bottom with silicone lubricant or special PVC formulations - this will also facilitate glittering.
Comparison of technical specifications of models
To make the choice easier, you should bring the main parameters of popular models into a single table, which will allow you to clearly see the difference in dimensions, load capacity and permissible power of the engine.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | Engine power (hp) |
|---|---|---|---|---|
| Monsoon 2.6 | 260 | 126 | 300 | up to 3.5 |
| Monsoon 2.9 | 290 | 136 | 380 | 5.0 |
| Monsoon 3.2 | 320 | 146 | 450 | till 9. 9. |
| Monsoon 3.5 Rib | 350 | 160 | 600 | 15.0 |
And if you look at the table, you can see that there's a direct correlation between the length of the body and the power that's allowed. motor-power It is not recommended as this can lead to the destruction of the transom and loss of controllability of the vessel.
The load capacity is specified by the weight of passengers, equipment and the engine itself. Therefore, when choosing a model, always leave a margin of 15-20% of the rated carrying capacity for safety and comfort on the water.
Selection of motor and attachment equipment
The right engine choice is a guarantee of enjoyment of operation. For models up to 3 meters long, two-stroke engines with a capacity of 3-5 hp will be the best solution. They provide confident glides with one fisherman and are fuel efficient. More powerful units will be required for transporting two adults or going to large water.
An important element of the equipment is the anchor and anchor rim. anchorage It is required for fishing in windy weather or on the current. The rum should be securely fixed in the nose, preferably with reinforcement at the place of attachment to the cylinder.
⚠️ Warning: When installing the motor, make sure that the diewint (motor foot) is immersed in water to the required depth, but not too deep, so as not to create unnecessary resistance and not to clog the water pump with sand in shallow water.
☑️ Checking before getting on the water
Additionally, the installation of a sonar and a navigator is worth considering, and for this purpose, special platforms or pockets are often provided on boards. Electric trans-engines They are also popular among quiet fishing enthusiasts, although they significantly increase the overall weight of gear due to the battery.
Operational rules and maintenance
The durability of a PVC boat depends on its maintenance, and after each operation, especially in salt water or muddy water, the vessel must be rinsed with fresh water, which will prevent the corrosion of the material and accessories by aggressive environments and microorganisms.
Drying before packaging is a must, and even a small amount of moisture inside the bag when stored can lead to mold that destroys the structure. reinforced PVC Dry the boat in the shade, avoiding direct sunlight, which can cause uneven expansion of air in the cylinders.
Check the pressure in the cylinders regularly. In hot weather, it can increase, which creates excessive tension of the fabric. In such cases, it is recommended to put some of the air through the valves. In winter, on the contrary, the pressure drops, but you can not pump the cylinders in the cold - this should be done already on the water or in a warm room.
Proper storage in a dry and cool place in a straightened or semi-folded form extends the life of the PVC boat twice.
Frequently Asked Questions (FAQ)
What is the optimal pressure in the monsoon boat cylinders?
The optimum working pressure is 0.2-0.25 atm (about 3-4 PSI). Exceeding this value can lead to strain of the seams, especially in hot weather.
Can you use the monsoon boat in winter for fishing?
Use is possible, but with limitations: PVC material becomes tougher in the cold and more vulnerable to impact, you need to use special frost-resistant greases for valves and be extremely careful when contacting sharp edges of ice.
How to seal the boat in the field?
For emergency repairs, the kit usually comes with a piece of cloth and glue, but for reliable repairs, it is better to use special polyurethane glue-based remixes designed for PVC materials, giving the glue time to polymerize.
What is the maximum weight of the transom?
The traverse is designed for the weight of the motor corresponding to the maximum power for this model. These are usually engines weighing up to 20-25 kg. Installation of heavier four-strokes of large volume requires strengthening the transom or choosing a larger model.