Choosing a boat for fishing or family vacations on the water often turns into a long search for a compromise between comfort, load capacity and ease of transportation. Riviera boat 3200 NDNDThe low-pressure inflatable floor (LDPB) design provides excellent wave germination, which is critical for large bodies of water.
You don’t need to be a professional driver to appreciate the smoothness of this vessel, because it is designed to meet the requirements of even experienced fishermen. In this article, we will discuss in detail the technical nuances, features of the assembly and the real advantages of the model so that you can make an informed decision about the purchase.
Design features and materials
The basis of durability of any inflatable boat is the quality of the material used. Riviera 3200 It is made of five-layer high-density PVC reinforced fabric that is resistant to gasoline, oils and ultraviolet radiation, and this multilayered structure provides high tensile strength and puncture, allowing you to move safely even in places with rocky bottoms or cane thickets.
The key element of the design is low-pressureThis is a slender, which consists of many vertical ligaments connecting the upper and lower planes, and this engineering solution turns the bottom into a rigid flooring that can withstand significant loads without the use of plywood or aluminum floorboards, which gives the vessel excellent seaworthiness comparable to rigid hulls.
⚠️ Attention: When pumping the bottom of the NDND, strictly monitor the gauge readings. The bottom pumped in the heat can be deformed, and the under-pumped bottom can reduce driving performance and increase the risk of damage.
The joints are made in a lattice manner, which guarantees 100% tightness of the joints even under extreme loads. All joints are further strengthened by strong tapes, preventing material from stratification over time. To protect against mechanical damage, the most vulnerable places, such as the transom and the sides in the area of the switches, are equipped with reinforced linings.
Suture production technology
The Riviera boats use a two-component glue that, when polymerized, creates a monolithic compound stronger than the material itself, which eliminates the possibility of unstitching seams even when under load for long periods.
Technical specifications of the Riviera 3200
The dimensions and weight parameters of this model make it versatile for use both alone and in a company of 2-3 people. the length of the body is 320 cm and width is 154 cm, which provides sufficient internal volume for the placement of equipment and trophies. Maximum load capacity allows you to take on board up to 450 kg, including the weight of passengers, engine and fuel.
An important parameter is the recommended power outboard motor, which varies in the range from 5 to 10 hp When installing a 9.9 hp engine, the boat is able to reach speeds of up to 30-35 km / h depending on the load and condition of the water surface. The weight of the kit in the packaging bag is about 42 kg, which requires the use of a wheeled transom wheel or the assistance of a partner during transportation.
| Parameter | Meaning | Unit of measurement |
|---|---|---|
| Full length | 320 | centimeter |
| Full width | 154 | centimeter |
| Diameter of the side | 36 | centimeter |
| Load capacity | 450 | kilogram |
| Weight of kit | 42 | kilogram |
The interior space is divided into several independent compartments, which improves overall safety, and even if one of the cylinders is damaged, the rest will keep the boat buoyant, allowing you to safely get to shore, a standard of safety for all modern models of this class.
Comfort and ergonomics on the water
ergonomics Riviera 3200 It's designed to minimize fatigue during long walks or long-duration fishing. High-rise inflatable boards effectively protect against splashes, keeping clothes and equipment dry even when moving against the wave. The inner surface of the bottom has a slip-resistant coating, allowing you to confidently navigate the cockpit in wet shoes.
The attachments are designed with handy handrails and mounts, you can easily fit the spinning holders, sonar or navigator without disturbing the integrity of the structure. The seats (banks) are made of moisture-resistant plywood with soft pads, they are fixed in specific places, ensuring the correct distribution.
The shape of the bow, which effectively cuts through the wave, reduces the impact load on the body, makes the swim softer and more predictable, which is especially appreciated by anglers who need the stability of the platform to throw tackles.
Assembly and preparation for launching
Preparation process The Riviera 3200 NDNDM takes no more than 15-20 minutes to operate with minimal experience, and the first step is always to lay the vessel on a flat surface and visually inspect the vessel for any foreign objects that could damage the material.
It is recommended to start pumping from the nose and bottom using a foot-driven pump or compressor. It is important to follow the filling sequence of cylinders specified in the instructions to ensure an even distribution of pressure. The bottom of the BNDM requires special attention: it must be pumped to a state of hardness, but not to allow excessive inflatation.
☑️ Boat assembly procedure
After all the compartments are pumped, you need to check the pressure with a pressure gauge and adjust it if necessary. Then you install a transom panel and fix it in the slots, after which you can install the motor. Before launching, make sure that the drain valve is closed and all the belts and handles are securely secured.
⚠️ Warning: Never leave a pumped boat in direct sunlight for long periods of time unattended. The thermal expansion of air can lead to a critical increase in pressure inside cylinders.
Operation and performance
On the water. Riviera 3200 The rigid inflatable floor allows you to plane even with two passengers on board using a 9.9 hp engine. The angle of bottom keeliness contributes to good retention and reduced yaw on the wave.
The maneuverability of the vessel is highly appreciated due to the compact size and convenient location of the rowers. However, it should be remembered that the inflatable sides have a certain sailing capacity, so with strong side winds, more active steering is required.
Fuel consumption at cruising speed is about 3-4 liters per hour, which makes this model economical for long trips, the engine compartment is protected from splashes, which prolongs the life of the engine. In general, the driving performance allows you to use the boat not only on calm lakes, but also on large reservoirs with moderate chop.
To improve the course stability at high speeds, try to slightly raise the nose of the boat, shifting the load closer to the transom, or use transom plates (hydro wing) on the engine.
Care, maintenance and storage
Your durability Riviera boats 3200 After each foray into the water, the product must be thoroughly washed with fresh water to remove salt, sand and organic residues, and special attention should be paid to valves and joints where dirt often accumulates.
Drying should be done in the shade, in the straightened form, until the moisture disappears completely. Packing a wet boat is guaranteed to lead to mold and unpleasant odor, which is then very difficult to get rid of, and it is best to store the product in suspension or on the shelf in an unfolded form to avoid crumbs of material.
Check the pressure in the cylinders and the condition of the seams regularly. If you find small punctures, use a remix kit that is standard. For more serious damage, you should contact a specialized workshop where you will professionally select the material and glue.
Proper drying and storage in the spread form are the main factors that increase the service life of PVC materials at times.
Frequently Asked Questions (FAQ)
Can you use the Riviera boat 3200 in winter for fishing?
Using PVC boats at low temperatures is possible, but requires extreme caution. The material in the cold becomes less elastic and more brittle. If you plan to operate in winter, you need to use special frost-resistant valve lubricants and avoid shock loads on the hull. However, the manufacturer does not recommend constant use at temperatures below -10 ° C.
What is the minimum power of the motor needed to get on plane?
To enter the planing with one adult (about 80-90 kg) and a minimum supply of equipment is usually enough motor capacity of 6-8 hp For two passengers or at full load it is recommended to use a motor capacity of 9.9 hp This will provide a confident exit to mode and good speed.
How to properly seal a small puncture in the field?
For field repairs, use a patch of remix and glue. The surface around the damage should be degreased (alcohol or Kalosha gasoline), cleaned with fine sandpaper, applied glue to both surfaces, let dry for 10-15 minutes, then pressed hard the patch and warmed up with a hairdryer or warm hands. Full polymerization takes 24 hours.
Do I need to register this boat with GIMS?
According to the current legislation of the Russian Federation, small vessels weighing more than 200 kg are subject to registration. Riviera 3200 NDLD It's about 42 kg, even if you take into account the weight of the motor (up to 20-25 kg) and the fuel, the total weight rarely exceeds the 200 kg threshold. However, if you install a heavy motor and take a lot of equipment, the total weight is better to count. If it is less than 200 kg, registration is not required.