Inflatable vessels have long ceased to be just a cheap option for rare sorties to the water and have become full-fledged alternatives to hull boats. NDMABrand. StarThe turbocharged water system, well known to Russian water engines, offers a wide range of such solutions that combine compactness during transportation and excellent driving performance on the water.
The main advantage of the design is the absence of rigid elements in the bottom, which allows the boat to Star You don't have to waste time assembling floorboards or inflating a separate keel cylinder, because it's already built into a single structure, and it makes heading out on the water quick and comfortable, especially in environments where it's important to save time.
When choosing a specific modification, you should pay attention not only to the length of the case, but also to the quality of the material used. PVC boat Star It's made of multi-layered reinforced fabrics that are resistant to ultraviolet light and mechanical damage, and it's this parameter that often becomes the deciding factor in the durability of a product in an aggressive environment.
Design features and advantages of BDND
The low-pressure inflatable floor technology is fundamentally changing the way we think about the maneuverability and speed of inflatable vessels, and unlike plywood sleigh models, the bottom is a single inflatable chamber, divided into sections by vertical connections. construction allows you to achieve almost perfect aerodynamics during planing, since there are no protruding parts or irregularities that create vortices.
One of the key features of the models Star It's a quality valve system, and it's a sealed system, even when you're in extreme temperatures, which is critically important in the early morning or off-season, and you don't have to pump up your cylinders all the time if you've prepared the boat for the launch.
Why is NDNDD faster than pipe boats?
The low pressure inflatable floor has less drag and better streamlining compared to hard plywood or aluminum sheets, which allows for higher speed at the same engine power.
It is important to note that the rigidity of the inflatable floor in models NDMA When pumped properly (usually up to 0.2 atm), the bottom becomes so elastic that you can walk confidently in soft-sole shoes, which provides stability when you move around the cockpit while fishing or mounting tackle.
- 🚀 High planing speed due to the absence of turbulence under the bottom.
- 🛡️ Improved protection against impacts on bottom obstacles due to the shock absorbing properties of the inflated floor.
- 📦 Compact in packaged form, allowing you to transport a boat in the trunk of a passenger car.
- ⚖️ Equal distribution of the load over the entire area of the bottom.
The main advantage of NDND is the combination of high speed and comfort, comparable to hard-bottom vessels, while maintaining low weight.
Popular models of the line Star
The manufacturer's range covers the different needs of water-powered engines, from single-seat compact variants to spacious family vessels. Star It is designed to meet specific operating conditions, whether it is quiet river backwaters or open waters of large reservoirs.
The most popular models are medium size range, which optimally balance between the load capacity and dimensions. boats 3.2–3.6 meters long It allows two adult passengers to feel confident with a full suite of equipment, while still being light enough to carry in disassembled form.
For fans of trophy fishing or long-distance travel, there are longer length modifications, often reinforced transoms and added additional inflatable elements to improve stability. motor You plan to use and how many people will be on board.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | River power of the motor (hp) |
|---|---|---|---|---|
| Star 290 | 290 | 125 | 350 | 2-5 |
| Star 320 | 320 | 135 | 450 | 5-9.9 |
| Star 350 | 350 | 145 | 550 | 9.9-15 |
| Star 390 | 390 | 160 | 700 | 15-25 |
Materials and build quality
The basis of durability of any inflatable boat lies in the materials it is made of. - Brand Star It uses specialized high-density PVC fabrics, often with cord reinforcement, which makes the body resistant to puncture and abrasion, which is especially true when frequent contact with rocky bottom or sand.
The quality of the seams is the second critical factor. hot-vulcanization These compounds provide a monolithic structure, preventing the material from stratification even under the influence of high loads and aggressive chemicals (gasoline, oil, salt water).
⚠️ Warning: After each operation in salt water, be sure to wash the boat with fresh water. The salt, when dried, becomes cryalized and can damage the fabric structure and weaken the adhesive sutures over time.
Furniture used in models StarThe plastic holders for the switches, valves and mounting handles are made of materials that do not lose elasticity in the cold and do not crack under the scorching sun, which ensures that minor repairs are not required at the most inopportune time.
- 🧵 Five-layer structure of tissue with protection from UV radiation.
- 🌡️ Maintaining elasticity over a wide temperature range (from -40 to +60 C).
- 🛢️ Resistance to the effects of fuel (combustible lubricants).
- 🔩 Reliable fixation of all attachments.
Operation and preparation for water launch
Proper preparation of the boat Star It's a safe and comfortable walk to get out of the water, starting with a flat pumping area, and it's not recommended to pump cylinders on asphalt or concrete without a protective mat, because abrasive particles can damage the bottom of the PVC.
The pumping process is best done using a foot or electric pump, controlling pressure with a gauge. Excessive pumping in hot weather can cause the seams to rupture due to air expansion, so leave a small margin. NDMA characterized by a slight decrease in pressure during the cooling process, so after getting on the water may require a light pumping.
☑️ Checklist before exit
Installation of attachments, such as transom wheels or sonar, should be strictly according to instructions. Incorrect installation can disrupt the balance of the boat or damage inflatable elements. Always make sure that the sharp edges of metal parts do not touch PVC when loaded.
When operating in windy weather or on the wave, it is important to properly distribute the load. The center of gravity should be closer to the center of the cockpit, so as not to pick up the nose or stern. light-dutywhere the buoyancy reserve is not as large as that of large boats.
Care, storage and repair
Long life of your boat Star It depends on how you care for it, and after every fishing or walk, you have to thoroughly wash the hull with clean water and dry it, and keeping a wet boat rolled up is a sure way to get mold and break the adhesive layer.
The best storage bag is a special bag or case that protects against dust and rodents. The optimal storage temperature is roomy, but short-term storage in an unheated garage is acceptable if the material is completely dry. Avoid storage near heating appliances or under direct sunlight for a long time.
Lubricate the valves with silicone lubrication once a season - this will prevent them from "stickling" and ensure tightness for many years.
If you get a puncture or a cut, you can do the repair yourself with a remix, and the surface is cleaned, degreased, and a patch of the same material is applied using a special glue, and it's important to let the glue be fully polymerized before pumping, following the instructions on the tube.
⚠️ Warning: Do not use superglues (cyanacrylates) or glue guns to repair PVC boats, making the material tough and brittle, which will cause further rupture at the repair site.
Comparison with analogues and final conclusions
There are many manufacturers of inflatable boats on the market, and Star It is a strong position because of its value for money, and compared to its budget counterparts, it often outperforms in the quality of the fittings and density of the PVC it uses, but it may be inferior to premium brands in weight because it uses thicker but heavier fabrics.
When you're choosing between different modifications, you need to consider your real needs. If you're planning to walk alone for short distances, there's no point in overpaying for a huge amount of money. boatFor family holidays, it is better to take a model with a margin for carrying capacity, which will ensure safety and comfort.
In summary, we can say that the boats PVC NDND Star It is a reliable tool for water tourism and fishing, and a competent approach to choosing a model and observing the rules of operation will allow you to enjoy the water element for many years without unnecessary problems and costs.
Should I buy a used boat Star?
Buying used is possible if you check the seams for leakiness (pump and leave for a day) and make sure that the material is not “suffocated” from old age.
Frequently Asked Questions (FAQ)
What pressure should be pumped in the cylinders and bottom of the boat Star?
For most models Star The operating pressure in the main cylinders is 0.2 atmosphere (about 200 mbar). The bottom of the NDND is also pumped to 0.2 atm. Do not exceed these values, especially in hot weather, to avoid rupture of the seams.
Is it possible to use a PVC boat in winter?
You can use a boat in subzero temperatures, but with caution. PVC material in the cold becomes less elastic and more susceptible to mechanical damage. Also, in the cold, you can't bend and fold the boat, it can crack.
Which engine is better for the 320 Star?
For the 320 cm model, a two-stroke engine with a capacity of 5-9.9 hp is the best choice, which will provide a planing output with one or two passengers and an acceptable speed. A more powerful engine can be redundant and lead to fuel overruns.
How to keep a boat in the winter?
The boat must be thoroughly washed, dried and folded in a free state (not tightly folded), stored in a dry room at a temperature of not lower than -20 ° C and not higher than + 30 ° C, away from heat sources and direct sunlight.
What if the boat starts poisoning the air?
First, identify the leakage site with a soap solution. If the valve is poisoning, try pressing it or lubricating it. If the balloon is damaged, use a remix. If the seams are seriously damaged, you should contact the service center.