The Russian market of inflatable swimming facilities is experiencing a real boom, and one of the brightest representatives of domestic shipbuilding has become a major industry. PVC boatThe brand, which originated in Novosibirsk, quickly gained popularity among fishermen and hunters due to its combination of affordable prices and time-tested design solutions. Unlike many competitors, the plant's engineers relied not on external tinsel but on functionality and maintainability in the field.
Many aquatic motorists choose this brand for its ability to withstand difficult operating conditions on the rivers of Siberia and the Urals. Construction So, the design is designed to minimize the risk of puncture and ensure stability on the wave, and if you're looking for a universal boat for the weekend, a detailed analysis of the technical features will be the deciding factor in making the right decision.
In this article, we will look at all the nuances, from choosing a model to the correct care of the material. reinforced PVC density of 750 g/m2 This is the standard for this series, and how to choose the right motor to achieve maximum efficiency, and understanding these details will help avoid the typical mistakes of beginners and extend the life of your boat for many years.
Design features and materials
The basis of any inflatable boat is the material from which it is made. Ob high-quality reinforced polyvinyl chloride (PVC) It's not just a thin film, it's a complex composite material that consists of multiple layers, including a strong synthetic mesh that gives the product resistance to burst loads, and the density varies from model to model, but is most often 750 or 900 grams per square meter.
And the way that we combine the elements is very important. bonding This ensures that seams are tight, often stronger than the material on the side, and unlike crosslinks, it completely eliminates the possibility of leaking through needle holes, which is critical for water safety.
⚠️ Warning: Never try to dry the boat near an open fire or in the direct scorching sun in the heat, as overheating PVC can lead to irreversible deformation of the material structure and stratification of the seams.
The bottom of the boats is most often performed in the variant NDMA The inflatable floor option provides excellent keel and stiffness, allowing you to achieve high speed, whereas the soldered models are lighter and more compact when assembled, depending on your priorities: speed and seaworthiness or maximum transportability.
Why does PVC darken with time?
Darkening of the material is a natural process of oxidation of the upper layer under the influence of ultraviolet light. This does not affect the strength specifications, but to preserve color, it is recommended to use protective sprays or keep the boat in a case.
Review of popular models of the series
The range of products is extensive and covers different classes of carrying capacity, the most popular is the two-seater version, which is ideal for a quiet fishing trip between two people, which has the optimal ratio of weight to interior space, allowing you to accommodate two fishermen with a full set of equipment, characterized by a length of about 320-340 cm.
For those who prefer solo outings or have weight restrictions, there are single options, which are narrow and lightweight, making it easy to carry them in a backpack even for long distances. loading capacity It is limited and the installation of a powerful motor may not be appropriate.
The three-seat and four-seat versions are already full-fledged boats for serious fishing and hunting, equipped with reinforced cylinders and have a buoyancy reserve that allows three adults to safely stay on the water. trans-strength under motors up to 15 hp
When choosing a particular model, it is important to pay attention not only to the length, but also to the width of the cockpit: a wide boat is more stable in the parking lot, but more powerful sails in the wind. A narrow one is faster, but requires a more accurate landing. Balloons 36-40 cm diameter provide better germination per wave, which is important for large reservoirs.
Technical specifications and comparison
To understand the differences between the modifications, it's convenient to put the data into a single table, which will help you visually measure the increase in parameters depending on the size, and pay attention to the load capacity, because they determine not only the number of passengers, but also the possibility of installing attachments.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | Weight (kg) |
|---|---|---|---|---|
| Ob-280 | 280 | 120 | 220 | 26 |
| Ob-320 | 320 | 140 | 350 | 34 |
| Ob-360 | 360 | 150 | 500 | 42 |
| Ob-400 | 400 | 160 | 650 | 51 |
As you can see from the data, not only does the capacity increase as the length increases, but the weight of the product also increases, which is an important factor if you plan to transport a boat in the trunk of a passenger car without a trailer. For models over 360 cm, the weight assembled can become critical for one person.
The pressure that can be pumped into cylinders is also an important parameter. 0.2 atmExceeding this value in hot weather is dangerous, because the air expands and can damage the seams, so you should always put some air out in the sun.
When buying, be sure to check the equipment: the availability of a remix, pump and bag may differ depending on the dealer and the specific batch of goods.
Motor selection and transoming
The right engine choice is the key to comfortable operation. For lighter models up to 300 cm, engines with a capacity of 2-5 hp will be the best choice. They allow you to reach speeds of 10-15 km / h, which is enough to move around the water area. More powerful units here will be redundant and can disrupt the balance of the vessel.
For medium and large boats (320-400 cm) it is recommended to use engines in the range of 5-15 hp. maximum capacityExceeding this limit leads to overloading of the transax plate and the risk of engine detachment during movement, which is a critical situation.
- 🚤 For fishing in reeds, it is better to choose engines with a short leg and the ability to raise lower unit.
- ⚓ To get to the big water (Ladoga, Onega) is important reliability and the ability to install an electric motor for a silent approach.
- 🔧 Make sure that the height of your boat’s transcreant (usually 381mm or 508mm) matches the lower unit of the motor you choose.
Installing the motor requires attention to detail, the transom plate must be installed vertically, and if the motor has an electric starter or a hydraulic lift, make sure that the engine is fully vertical. squirt-board They are reinforced by additional inserts, which often come with powerful boat models.
☑️ Check before installing the engine
Operational rules and care
The durability of your boat depends on how you handle it. After each trip, especially if it's salty or dirty, the boat needs to be washed with fresh water. Salt and silt, when dried, act as an abrasive, gradually destroying the protective layer. PVC coating.
Drying is a separate topic. You can't fold a wet boat, it will cause mold and decay of the fabric, but it's also bad to dry in the sun, and the ideal option is to dry it in the shade at room temperature, and if you can't, wipe the sides dry with soft rags before packing.
⚠️ Warning: When stored in winter, make sure that the boat does not lie on sharp folds or under heavy objects, as in the cold, PVC becomes fragile and can crack when deformed.
Check the valves regularly for leaks. Often, air poisoning is due to a grain of sand falling under a thread or gasket. Simple preventive cleaning of the valve group once a season will save you from water trouble. Use only soft brushes and warm water for cleaning.
Opportunities of tuning and modernization
Basic equipment often does not meet the needs of experienced anglers, so tuning becomes a necessity. stringer (hard profiles) into the pockets of the inflatable floor, which gives the bottom extra rigidity and improves hydrodynamics, allowing the boat to more easily go to the sled.
Owners also often install additional rings and rod holders, which allow you to free your hands and securely lock the gear, and you will not be superfluous to purchase an anchor rift with a folding mechanism that allows you to safely and quickly raise the anchor without coming close to the side.
- 🎣 Installing sonar and navigator on removable brackets significantly increases the efficiency of fish search.
- 💡 Installation of LED lighting cockpit will make night fishing or camp more comfortable and safer.
- 🛡️ On the bottom you can stick additional tape-protectors from the same PVC to protect against abrasion on sand and stones.
In modern times, it is important to observe the measure and not overload the structure. Any additional elements should be attached securely, but with the possibility of dismantling. home-made tuning It should not disturb the tightness of the main cylinders.
Competent tuning turns a standard boat into a specialized tool, sharpened for the specific tasks of the owner, whether it is trolling or spinning from the shore.
Frequently Asked Questions (FAQ)
What is the life of the PVC Ob boat?
When properly operated and stored, the service life is 7-10 years or more, and UV protection and proper folding are key.
Can I seal the boat by myself?
Yes, it comes with a remix, adhesive and PVC patches are enough for minor puncture repairs, and for serious damage, it is better to contact the service.
Will the boat withstand rocks and snags?
The material is resistant to mechanical stress, but sharp stones and snags under load can damage the bottom. It is recommended to use protective linings or choose parking places with a sandy bottom.
Do I need to register a boat with GIMS?
Registration is required for vessels weighing more than 200 kg in running order or with an engine powering more than 8 hp (for boats up to 3 meters).