Choosing the first boat for fishing or a family holiday on the water often becomes a daunting task, especially when the budget is limited, but the reliability requirements are high. PVC-boat They have long established themselves as an affordable and practical alternative to heavy metal or fiberglass counterparts. Sharks 280 It stands out for its compactness and optimal ratio of price and quality.
This model belongs to the class of rowing boats, but the design features make it easy to equip them. squirt-board The 280 centimeters are ideal for moderate-wave waterways that do not require high seaworthiness on large vessels, and it is the nuances and technical details of this popular model that we will talk about in this article.
Design features and materials
The basis of the durability of any inflatable boat is the material from which its cylinder is made. Sharks 280 laminated PVC (polyvinyl chloride)The material has a density of about 750 g/sq.m., which balances strength and weight, and is resistant to ultraviolet, gasoline, oil and temperature extremes, which are critical for year-round operation.
The cylinders are designed to have independent compartments, which is the standard for water safety, and even if one of the cylinders is punctured, the boat will remain afloat. slushIt is considered more reliable than hot vulcanization, as it does not disrupt the structure of the material when heated.
- 🚣♂️ Three independent compartments They are buoyant even if one balloon is damaged.
- 🛡️ PVC reinforced resistant to abrasion and the effects of aggressive environments.
- 🔧 Built-in keel (in some modifications) improves the exchange rate stability when rowing.
⚠️ Warning: Despite the high strength of PVC, avoid contact with sharp stones, prickly bushes or hot surfaces (such as cigarette ash or fire sparks).
To extend the life of the PVC fabric after each fishing, rinse the boat with fresh water, especially if you have been swimming in salt water.
Installation and attachments
Buying. Sharks 280You don't just get a shell, you get a ready-to-use kit. Standard delivery usually includes two inflatable seats that attach to lyctross or cans. The seats are made of waterproof plywood and are covered in a dense fabric that provides comfort for several hours.
The bottom is an important element. In the basic version, it can be bottom The plywood floor, which consists of several sections, is much stiffer and allows you to stand on your feet more confidently while fishing, and special grooves or straps are used to fix the bottom.
Particular attention should be paid to the possibility of installation motorAlthough the boat is designed for paddles, the aft part has a transom knot, which allows you to fasten the transom board, which is subsequently put on the engine with a capacity of up to 3-5 hp, which turns the rowing boat into a full-fledged motorized boat for short walks.
Assembly and preparation for launching
Assembly process Sharks 280 It takes 10 to 20 minutes depending on the owner's experience and the air temperature, and it's important to follow a sequence of actions so that the valves and seams are not damaged, and the first thing is to lay the boat on a flat surface, cleared of branches and debris.
The cylinders are pumped with a foot or hand pump, the pressure in the cylinders should be 0.2-0.25 atmosphere, exceeding this value in the bright sun can cause the seams to rupture due to air expansion, so in the heat the cylinders are pumped slightly less, and before getting on the water check the pressure.
☑️ Boat assembly algorithm
Once the bottom is installed, you need to check its rigidity, and if plywood slate is used, it should be strung up to the point, which will ensure the correct geometry of the body and reduce the resistance of water when moving.
Water operation and driving performance
On the water. Sharks 280 It's predictable and stable, and because of the round shape of the cylinders, the boat has a good quality. stabilityThis is a small vessel, which allows you to safely spinning or catching fish even standing, but you should remember that this is a small vessel, and sudden movements of cargo can lead to rolling.
When using oars, the efficiency of rowing depends on the technique and the wind. Inflatable sides create sailing, so in windy weather rowing can be harder than on hard-bottom counterparts. However, for calm lakes and rivers with weak currents, this model is ideal.
If you decide to install a motor, be aware of weight restrictions. For a boat with a length of 2.8 meters, the optimal engine will weigh up to 10-12 kg. More powerful engines will require increasing the length of the boat or using heavier modifications with a reinforced transom.
| Characterization | Meaning | Note |
|---|---|---|
| Length, cm | 280 | Optimal for 1-2 people |
| Width, cm | 110-120 | Depends on the pump. |
| Load capacity, kg | 220 | Including boat weight |
| Packaging weight, kg | 16-18 | Depends on the bottom configuration |
| Passenger capacity | 2 people. | Recommended 1+ cargo |
The 220kg lifting capacity is the maximum weight a boat can withstand while staying afloat, but not a comfortable weight for active fishing.
Care, storage and repair
Durability Sharks 280 It depends on how you care for it, and after each operation, the boat needs to be thoroughly washed and, most importantly, it needs to be cleaned. fully dry The remaining moisture in the folds of the fabric will produce mold and a bad smell that is almost impossible to remove.
Store the product in a dry room at a temperature of -20 to +40 degrees. It is recommended not to keep the boat in a highly compressed state for a long time; it is better to periodically spread it and pump it to straighten the folds, this will reduce mechanical stress in the places of the folds.
In the case of a puncture, repairs are easy, usually with a remix with pieces of cloth and glue, the damage is cleaned, degreased and sealed with a patch with overlapping edges. PVC glue (e.g., polyurethane) ensures the tightness of the seam.
⚠️ Warning: Do not use conventional household adhesives or superglues (cyanacrylates) for repairs, which are not elastic and will detach when the cylinder is deformed in water.
How do you glue PVC properly?
The gluing process takes time. After applying the glue on both surfaces, you wait 10-15 minutes until you stick it, then apply the second layer, wait again, and press it tightly together, and it takes 24 to 48 hours to fully polymerize.
Frequently Asked Questions (FAQ)
Is it possible to ride a Sharks 280 boat by sea?
Technically, you can go to the surf, but it's not safe, because the boat has a low side and high sailing, which makes it vulnerable to side waves and wind, and for sea trips, it's better to choose models with an inflatable keel and higher pressure in the cylinders.
What is the maximum weight of the boat?
The passenger load capacity is 220 kg, of which about 40-50 kg is the weight of the boat with attachments, so the payload (fisher + tackle + motor) should not exceed 150-170 kg for safe operation.
How long does the boat dry after fishing?
In sunny weather at a temperature of +25 ° C, the boat dries for about 1-2 hours. In cloudy or humid weather, the process can take up to 5-6 hours. Do not pack a wet boat, otherwise it will start to slosh.
Do I need to register a boat with GIMS?
Boats weighing less than 200 kg and with an engine power less than 8 kW (10.88 hp) are not subject to registration. Sharks 280 weighs about 18 kg, and the engines for it are usually weaker than 5 hp, registration is not required.