PVC boat Time 3600 It is one of the most popular models among Russian fishermen and hunters, combining affordable price, reliability and versatility, and is positioned by the manufacturer as the optimal solution for rivers, lakes and coastal areas with an excitement of up to 2 points. specification, designPros and cons of the model, as well as give recommendations for the choice of motor and accessories.

Since its introduction to the market in 2018 Time 3600 It's built up trust with its strong 5-layer PVC (0.9 mm thick) and sophisticated ergonomics, but it also has some critical nuances, like, The weight of 75 kg makes it inconvenient for single transport without a trailer.We have analyzed owner reviews, test drives and benchmarking to help you make an informed decision before buying.

Technical specifications of the PVC boat Taimen 3600

Model Time 3600 belongs to the class of inflatable boats with a hard transom (HDND), which allows you to install outboard motors with a capacity of up to 20 hp.

  • 📏 Length/width: 360cm/165cm
  • 🔹 Material: 5-layer PVC 0.9 mm (Polyester reinforced)
  • 🚤 Max. engine power: 20 hp (recommended - 15 hp)
  • 👥 Passenger capacity: up to 4 people (max. load 560 kg)
  • ⚓ Weight: 75 kg (complete with transom and cans)
  • 💧 Load capacity: 560 kg (including engine and crew)

The peculiarity of the model is V-keelimproves the handling of the wave, and high-pressure (DND), which provides stiffness without the need for additional sleighs, but it is worth considering that when fully loaded, the boat "sank" by 10-15 cm, which can affect the performance.

Parameter Meaning Note
Thickness of PVC 0.9 mm Polyester-reinforced, resistant to punctures
Number of air compartments 3 + keel Increases safety in case of damage
Type of bottom NDND (inflatable) No need for sleds, but sensitive to overload
Dimensions folded 120×60×40 cm It fits in the trunk of an SUV.

Important: the manufacturer indicates the maximum power of the engine in 20 hp, but experienced owners recommend limiting the power of the engine. 15 hp To save the trans and PVC life, it's more powerful when you install the motor. Increases the risk of transom separation At high speeds.

📊 Which motor would you choose for the 3600?
Up to 10 hp.
10-15 hp.
15-20 hp.
Electric motor
I haven't decided.

Construction and materials: pros and cons

The boat's hull is made of reinforced PVC densely 1100 g/m2It's 20 percent stronger than standard analogues, but it also has some weaknesses.

  • ✅ Pros:
    • 🛡️ Resistance to puncture and abrasion (withstanding contact with branches, stones)
    • 🌡️ Operating temperature range: from -30°C before +60°C
    • 🔧 Easy repair with PVC glue (for example, Bostik 2402 or Clayberg)
  • ❌ Cons:
    • 🔥 Fear of prolonged exposure to UV rays (treating required) UV protection)
    • ❄️ Lower temperature -15°C PVC loses elasticity
    • 💦 Condensation inside cylinders at sudden temperature changes

Special attention deserves sink-board aluminum-alloy AMG-5 It can withstand a load of up to 100 kg, but during intensive operation (for example, with a 20 hp engine), it is recommended to strengthen the fastening with additional screeds.

⚠️ Attention: When storing a boat folded for more than 3 months, PVC can deform. It is optimal to store it in a semi-inflated state (pressure). 0.1-0.15 bar) or on a special rack.
💡

To increase the life of PVC, treat the boat UV protection (for example, Star brite UV Protectant) before the first launch and repeat the procedure every 2-3 months.

Comparison with analogues: which is better?

Main competitors Time 3600 in the Russian market - boats Frigate 360, Corvette 360 and Bark 360PLet's compare them by key parameters:

Model Time 3600 Frigate 360 Corvette 360 Bark 360P
Thickness of PVC, mm 0,9 0,75 1,0 0,9
Max, engine power, hp. 20 15 20 15
Weight, kg 75 68 82 70
Price, thousand rubles (2026) 180–210 160–190 220–250 170–200

Conclusions:

  • Time 3600 Wins in price/quality ratio, but loses Corvette 360 PVC strength.
  • Frigate 360 lighter, but has a lower load capacity and a weaker transom plate.
  • Bark 360P It is cheaper, but is equipped with less reliable valves (according to owner reviews).
💡

If you need a boat for active fishing with a 15-20 hp engine, Time 3600 For extreme conditions (thresholds, heavy chop) it is better to consider Corvette 360 PVC 1.0 mm.

Which motor to choose for the 3600?

The manufacturer allows to install engines up to 20 hp, but in practice the choice depends on the purposes of operation:

  • 🎣 Fishing on the lake/river: engine-optimum 9.9-15 hp (for example, Yamaha F15 or Mercury 15) The speed will be 25-35 km/h full load.
  • 🚤 Long-distance hikes: motor 15-20 hp. (for example, Tohatsu 20), but the transmessel is required.
  • ⚡ Electric motor: fit Minn Kota Endura C2 55 55 lbs for quiet hunting or trolling.

It is important to consider engineweight: chute Time 3600 It's designed to carry up to 100 kg. Suzuki DF20 It weighs 52 kg. Honda BF20 - 62 kg. Exceeding the limit will lead to deformation of the fasteners.

⚠️ Attention: When installing a motor more powerful than 15 hp, be sure to use transom (e.g. belts) Ratchet Tie Down This will prevent the plate from playing on the wave.

Make sure that the transom plate is fixed with 4 bolts (there are 2 in the set - buy another 2!)

Check the pressure in the cylinders (optimum) 0.25-0.3 bar)

Process the engine anchorages corrosion-free (for example, Liqui Moly MoS2)

Conduct a test start of the engine on land (checking idle speeds)->

Reviews of owners: real experience of operation

After analyzing the feedback on the forums (FishHunting, BoatMaster) and in VKontakte groups, we identified typical opinions:

  • 👍 Dignities:
    • 💪 « It can withstand a wave of up to 1.5 m without problems (review with the Fisherman)
    • 🔧 « In 3 seasons, no punctures – only scratches from stones
    • 🚗 « It fits in the trunk. Toyota RAV4 trailerless”
  • 👎 Disadvantages:
    • 🏋️ « Weight 75 kg - difficult to carry alone" (frequent complaint)
    • 🌞 « PVC burns out in the sun if not treated
    • 🔊 « Noisy at high speed (with a 20 hp engine)

Interesting fact: the owners note that the boat It behaves better with a 15 hp engine than with 20 hp. The latter creates an excessive load on the transom, which leads to vibrations. kevlar-bottom (e.g. from BoatCover) to protect against puncture.

What do they say about durability?

Average service life Time 3600 When properly operated, it takes 7-10 years, but there are cases where PVC begins to delaminate after 4-5 seasons (when stored in the sun or without UV treatment).

Tuning and accessories: what is worth buying?

The basic equipment of the boat includes banks, oars and a pump, but for comfortable operation additional accessories will be required:

  • 🛠️ Definitely:
    • 🔋 Battery 12V 75Ah electric motor/ sonar
    • 🧲 Magnetic ladder gear-holder
    • 🔦 LED lighting (for example, SeaBlaze X2) for night fishing
  • ⚡ Useful improvements:
    • 🪑 Removable chair with adjustable height (e.g., Swivl-Eze)
    • 📡 Fixture for sonar (universal from) Ram Mounts)
    • 🛡️ Protective case for storage (e.g., for example) BoatCover Premium)

To improve safety, it is recommended to install buoy (for example, Sea-Meand pump-off (manual or electrical, as in the case of Rule 360 GPHIt is also useful to add railing on the sides for ease of movement.

💡

If you often fish alone, you should winch-power It's going to save you time and effort in transport.

Frequent Problems and How to Avoid Them

Even reliable boats have weak spots. Time 3600 The following problems are typical:

  1. Valve leakage. The reason is: sand or dirt, so you can wash the valves with fresh water after each exit and lubricate them with silicone grease.
  2. PVC detachment at the seams. The reason is overload or folded storage, so you can keep the boat half-inflated or on a frame.
  3. Translation vibration. The reason: the engine's mounts are weakened, so the solution is to use extra screeds and check the bolts before each exit.

Another common mistake is household pumping It does not provide the required pressure in the cylinders (0.25 bar), which leads to "slack" of the boat. boat-pump manometered (e.g., Bravo BP12).

⚠️ Attention: Never use it for PVC repairs. superglue Only specialized polyurethane-based adhesives (e.g., polyurethane-based adhesives) Poxipol for PVC.
❓ How many people can fit in Timen 3600?

Officially, up to 4 people, but with equipment and engine, it is comfortable to load 2-3 people. When fully loaded (560 kg), the boat strongly "lands" in the water, which worsens handling.

❓ Can I use a boat at sea?

Manufacturer does not recommend operation in marine conditions due to lack of sealed-off And we have a weak resistance to a strong wave, and we have coastal zones at most, with a surge of up to 1.

❓ Which pump is better for pumping?

Optimal use pressure-pump (for example, Bravo BP12 or Sevylor Quick PumpHand pumps (type) Compact-3) suitable for pumping but not for full pumping from the folded state.

❓ Do I need to register Time 3600 in GIMS?

Yes, if you install a more powerful motor 10.88 hp (according to the order of the Ministry of Emergency Situations No. 444 of 2020) For motors up to 10 hp registration is not required, but you must have small-boat (If the engine is more powerful than 5 hp)

❓ How to keep a boat in the winter?

Ideal conditions:

  • Temperature: +5°C to +15°C (unheated room)
  • Humidity: not higher than 60%
  • Position: in a semi-inflated state (pressure) 0.1 bar) or on a special rack
  • Processing: clean from dirt, dry, apply preservative valve