Domestically produced boating technology has long ceased to be associated with handicrafts, and a vivid example of this is the line of inflatable floating aids from Triton. Triton 335 PlusThe silk-based boats, which have become a benchmark in the 3.35-meter class, are often labeled in stores with "no color" or "no color specified," which raises legitimate questions about the look of the item being purchased.
In fact, the lack of a specific indication of the color in the name of the product is most often due to the features of warehouse accounting or the presence of several modifications of the same model. PVC boat It's a complex technical product, where not only the dimensions, but also the density of the material, the number of air compartments and the quality of the seams, and understanding the differences between standard gray and camouflage colors will help you make the right choice for fishing or recreation.
In this article, we will analyze in detail what lies behind the mysterious phrase “color is not specified”, compare the technical specifications of different versions. Triton 335 And we'll give you practical tips for how to operate, and you'll learn whether the pigmentation of the fabric affects the durability of the cylinders, and why some fishermen choose certain shades of camouflage on the water.
Design features of the model Triton 335 Plus
Model range Triton 335 Designed to meet the needs of both anglers and water enthusiasts, the boat is designed using high-quality five-layer PVC reinforced fabric, which provides high strength and resistance to mechanical damage. inflatable tubes They are divided into independent compartments, which guarantees buoyancy even in the case of puncture of one of the sections.
One of the key features of the Plus version is the increased width of the cockpit and the presence of a reinforced transom that can withstand an outboard motor with a capacity of up to 5-6 horsepower, which allows you to develop decent speeds even when fully loaded. Unlike the simpler versions, it uses a glued transmuner technology, which gives the entire structure additional rigidity and stability at the wave.
When choosing a boat, pay attention to the presence of amplification in the keel area - this prolongs the service life of the bottom with frequent pulling ashore.
It is important to note that the geometry of the cylinders is designed to minimize water resistance. Heart-shaped inflatable keel It provides excellent course stability, allowing the boat to confidently keep its trajectory even in lateral winds. All seams are made by hot welding, which excludes the stratification of materials under the influence of temperature changes and ultraviet radiation.
The mystery is what does “no color” or “no color specified” mean.
When faced with the product description "a boat with a new 335 plus without color," many buyers are confused. In fact, this wording in 99% of cases means that the boat has a standard design. grey Light Grey is the basic PVC fabric coloring that is used by the manufacturer by default for most models unless a special batch in camouflage is ordered.
Why do they say "color not specified?" Often this is due to the automation of inventory in online stores. When a warehouse runs out of camouflage boats (like "reed" or "forest"), but the gray ones remain, the system may not update the product card, leaving the color field empty or marking it as "standard." So the phrase "no color" is a technical marker for the basic gray version.
⚠️ Note: If you order a boat marked "color not specified", be prepared to receive a light gray product. If you need camouflage for hunting or hidden fishing, be sure to check the current balance with the manager before paying.
There is also a rare possibility that by "no color" is meant unpainted technical fabric, but for the series. Triton 335 Plus This is almost non-existent, because the outer layer of tissue always has pigmentation to protect against UV rays, so "no color" is, paradoxically, the presence of a classic gray tone, which is considered the most versatile.
Comparison of specifications: standard against camouflage
Many people wonder if there's a difference in performance between a regular gray boat and a camouflage model. tissue-density The two versions have identical layers and are 750 g/m2 (depending on the year of production, it can vary to 850 g/m2), the difference lies solely in the decorative layer and price.
Camouflage versions like the Fog or the Kamysh are often more expensive because of the more complex drawing process and smaller production runs. However, in terms of tensile and abrasion, they are not inferior to gray counterparts. The choice here lies more in the plane of aesthetics and use tasks: for open water and fishing in reeds, a gray boat can be even more noticeable than a motley camouflage.
| Characterization | Triton 335 Plus (Grey) | Triton 335 Plus (Camouflage) | Units of measurement |
|---|---|---|---|
| Maximum length | 335 | 335 | centimeter |
| maximum width | 152 | 152 | centimeter |
| Load capacity | 400 | 400 | kilogram |
| Boat mass (no hinged) | 34-36 | 34-36 | kilogram |
| Recommended engine power | 6 | 6 | hp |
As you can see from the table, dimensional The only thing to look at is the heating of the surface, and the dark colors of camouflage can get warmer in the sun, which is something to consider when you're standing on the shore for a long time in the summer heat.
Materials and durability of coating
The basis of durability of any PVC boats This is the quality of the polyvinyl chloride film and the reinforcement mesh. Triton 335 It uses a material that is not afraid of contact with gasoline, oils and salt water, special additives in the composition of PVC prevent the development of mold and fungus, which is especially important when stored in garage conditions.
The color pigment embedded in the top layer of the fabric is not only decorative, it serves as an additional filter that absorbs ultraviolet radiation, which is the main enemy of polymers. Gray coloring, which is the standard for “colorless” versions, is traditionally considered one of the most resistant to burnout.
How to prolong the life of the color of the boat?
After each operation, it is recommended to wash the boat with fresh water and dry in the shade. Direct sunlight for many hours can lead to micro-fading of even the most persistent camouflage after 5-7 years of operation.
When scratches appear on the surface, repairs are done with standard remakes. It is important to choose the color of the patch in tone, although for gray boats this is the easiest to do - they are the most common on sale. For camouflage models, you often have to use universal gray or black patches, which can be noticeable visually.
Assembly and preparation for operation
Assembly Triton 335 Plus It does not require special skills, but following a sequence of actions will prolong the life of the product. First of all, the boat is laid out on a flat surface, cleared of sharp objects. Inflating cylinders is recommended to be carried out to an operating pressure of 0.2 atm, using a pressure gauge at the pump to avoid uneven stretching of the fabric.
☑️ Checklist before the first descent into the water
After pumping the cylinders, a rigid floorboards is installed, depending on the modification, this can be plywood with moisture resistance or an aluminum profile. Slate-pol It's locked in pockets or slots, creating a hard bottom that you can move around freely, and you shouldn't ignore it, because cruising on an uninflated bottom can damage the inner surface of the cylinders.
Installation of attachments, such as rod holders or sonar, is only made after the final installation of the boat on the water or slipway. fasteners should not be pressed against cylinders. The 335 Plus model is characterized by the availability of convenient handles for carrying and perimeter fence, which improves the safety of passengers.
PVC boat operation and maintenance
The right care for flyboat After every fishing trip, especially in salt water or in water with blooming water, you need to thoroughly rinse the product with fresh water, which will wash away the aggressive salts and organics, which, when drying, can crystallize and damage the structure of PVC.
⚠️ Warning: Never pack a wet boat in a long-term transport bag, which will cause mold and a "charm" of fabric that is almost impossible to eliminate.
Store Triton 335 It is spread or half-blown at room temperature, and although the material is frost-resistant and can withstand temperatures up to -40°C, in the cold, PVC becomes brittle, and the risk of mechanical damage from careless handling increases many times over. The optimal temperature for storage is from +5 to +20 degrees Celsius.
The main enemy of PVC boats is not a puncture, but improper storage in a deflated and dirty form, leading to the degradation of the seam material.
Check the valves regularly, sometimes they get sand or small debris that prevents sealing, simple flushing of the valve group and grease with silicone grease (not petroleum-based!) will solve the problem of etching air.
Frequently Asked Questions (FAQ)
Can I use the Triton 335 Plus boat at sea?
Yes, the design of the boat allows you to go out into the sea, but you should consider the height of the wave. For high seas with a large wave, it is recommended to choose models with higher sides and be sure to use safety vests. Salt water should be washed off.
What is the difference between Triton 335 and 335 Plus?
Modification "Plus" is usually characterized by a reinforced transcreant, the presence of a reinforced inflatable keel and sometimes an increased width of the cockpit compared to the basic version, which increases comfort and carrying capacity.
How many people are comfortably accommodated in this boat?
Passport capacity is 3, but with equipment, motor and gear, the most comfortable operation is with 2 adults, three of which will accommodate, but will be a little cramped for active fishing.
Do I need to register a 335 cm boat in GIMS?
According to the legislation of the Russian Federation, boats weighing more than 200 kg (in running order) or with an engine with a capacity of more than 8 hp are subject to registration (from 2026 the power threshold can be revised, watch the news). Triton 335 light motor often falls into the category of not requiring registration, but an accurate calculation of the mass must be made taking into account the weight of the motor, tank and equipment.