Choosing a swimming aid for hunting and fishing in overgrown waters is a challenge that requires a special approach. Classic aluminum boats are too noisy and heavy, and conventional inflatable models often prove unstable or vulnerable to the sharp stalks of cane. PVC boat Velbot KamyshIt is created taking into account the specifics of domestic water bodies.
This model combines the maneuverability of a small vessel with the strength of a serious boat, which many anglers choose for its unique ability to pass where others get stuck or risk puncture, and below we will discuss in detail the design features, real-world experience and technical nuances that will help make an informed decision.
It is important to note that there are no universal boats, and velbot kamysh It has its own distinct advantages for certain conditions, but it also has its limitations, and understanding these features will allow you to maximize the potential of the vessel and avoid disappointments after the first fishing trip.
Structural features and materials of the body
The basis of durability of any inflatable boat is the material from which it is made. velbot kamysh It uses five-layer high-density reinforced PVC, which is not only very tensile, but also very abrasive, which is critical when it comes into contact with sandy shores and sediments.
Special attention was paid to the engineers area balloonThey have an increased diameter, which provides excellent stability even when fully loaded with equipment and crew, and the sides are raised high enough to effectively extinguish the spray, but do not interfere with oar work or observation of the water surface.
An important element of the structure is a reinforced bottom, made of a thicker material with additional protection against abrasion. Often in this area, the technology of "hard bottom" or install additional additional ones. protector-beltwhich take the brunt of the mooring to the shore or moving in shallow water.
⚠️ Warning: Despite the high strength of the material, avoid prolonged contact with the housing with hot surfaces or open fire. PVC is sensitive to high temperatures, and even short-term exposure to a spark from a fire can lead to melting and leakage.
All the seams are assembled by hot welding, which eliminates the possibility of material layering under load. velbot They are not afraid of temperature changes and prolonged stay in the water, maintaining elasticity even in frost.
Keep the boat straightened or rolled up, but don’t leave it inflated in direct sunlight for long periods of time – excess pressure can deform the seams.
Design "Kamysh": advantages for hunting and fishing
The big thing about this modification is that it's called the design. PVC boats Velbot Kamysh It is designed to be used in a stealthy manner and to move silently, often in camouflage tones (olive, sand, reed) that allow you to blend in with the surrounding vegetation and not to frighten the careful fish or game.
The shape of the nose is optimized to overcome thickets, and it doesn't draw water, it pushes the stems apart, allowing you to move forward without jerking, and this is especially valuable when hunting for ducks, when you need to walk quietly to the feeding place of the bird.
- 🌿 Special geometry of the bottom minimizes the resistance of water when moving through algae.
- 🔇 The design eliminates loud slaps on the sides of the water, providing silence.
- 🎣 The availability of convenient platforms for the installation of cloaking networks or shelters.
The interior space is organized so that the angler can comfortably accommodate with fishing rods or a hunter with a gun. Banks (seats) They're made of moisture-resistant plywood, and they have soft pads for comfort, long waits for cool, and they can be easily adjusted by changing the boat's balance.
Technical specifications and load capacity
When choosing a boat, you need to rely on dry numbers. velbot kamysh It is available in several sizes, which allows you to choose an option for both single fishing and for for sorties with a motor.
Below is a comparative table of the main modifications so that you can clearly assess the difference in size and capabilities:
| Model | Length (cm) | Width (cm) | Load capacity (kg) | Recommended motor (hp) |
|---|---|---|---|---|
| Welbot 280 | 280 | 130 | 350 | 2-5 |
| Welbot-320 | 320 | 140 | 450 | 5-9.9 |
| Welbot-360 | 360 | 150 | 600 | 10-15 |
| velbot-400 | 400 | 160 | 750 | 15-20 |
It is worth noting that the stated loading capacity This includes the weight of the crew, equipment, engine and hull, so always keep a 15-20% margin of maximum when planning a trip for safety and driving performance.
For models with index 320 and above, the possibility of installation is characteristic transomThis turns the boat from a rowing boat into a fully motorized vessel, capable of speeds of up to 25-30 km / h depending on the load.
⚠️ Warning: Exceeding the maximum power of the recommended motor may cause the transom to tear off or the boat to tip over due to too sharp a planing.
The weight of the boat itself, when packaged, varies from 25 to 45 kg depending on the configuration, making it portable on the trunk of a passenger car, although carrying it alone will require good physical shape or a bogie.
Operation in shallow waters and thickets
It is in difficult conditions PVC boat Velbot Kamysh Unlike a rigid hull, inflatable sides absorb impacts on hidden driftwoods or rocks, often just by pushing them away.
When you move through a reed, you need to follow a certain technique. You don't have to try to swim at high speed, it will create a wave that will confuse the stems in the engine propeller. Optimal mode is a calm course, in which the boat carefully spreads the vegetation.
To protect the screw, experienced users recommend using special protective casings or switching to paddle mode in particularly dense thickets. velbot It has excellent handling on oars, which allows you to maneuver between bushes without the risk of damaging the engine.
How do you clean the screw of the grass?
If the grass is still winding on the screw, do not start the engine "dry". Carefully tilt the deadwell, remove the grass with your hands or use a special knife, which should always be in the emergency kit.
The bottom of the boat is designed to minimize stranding, and the sleek contours make it easy to pull the boat into the water even at low levels by just pushing it off with a paddle or hand.
The main advantage of the Kamysh model is the ability to safely and silently move around overgrown areas of the reservoir, where the use of other boats is impossible or extremely risky.
Installation and additional equipment
The basic equipment usually includes the boat itself, removable cans, remake and carry bag. PVC boats Welbot It is worth considering the possibility of purchasing additional accessories.
First of all, we are talking about the anchor device. This model does not need a heavy anchor, it is enough 1.5-2 kg. It is important to have a reliable anchor shaft and a quick reset so that in the case of a hook in the driftwoods you can immediately release.
- 🎒 Bag-backpack for carrying - greatly facilitates transportation on the shore.
- ⚓ A cat anchor or wicker anchor is ideal for hooks in grass and driftwood.
- 💨 A foot pump with a pressure gauge - allows you to quickly pump the cylinders to the desired pressure without effort.
You also have to look at the rod holders and the sounder holders. velbot Often, there are special sites or facilities for installation, and the presence of sonar in shallow water helps to bypass dangerous areas and find fish navels.
Don't forget to wear life jackets. Even if you're a great swimmer, having a vest on board is a safety and legal requirement. Choose models with pockets for small things and bright colors.
Field care, storage and repair
And PVC boat Velbot Kamysh It's been in service for years, and it needs to be properly cared for, and after every fishing, especially in salt water or overgrown bodies of water, the body needs to be thoroughly washed with fresh water, and this will remove the sand, the silt and the corrosive salts that can damage the material when drying out.
Drying is a critical step, and keeping a wet boat rolled up is absolutely impossible, and it will cause mold, bad smell and, in the worst case, burning of the material (breaking polymer bonds) and drying the boat in the shade, straightened.
The remix should always have PVC glue, patches of different sizes, degreaser and sandpaper. Small punctures should be sealed immediately, without waiting for them to turn into large holes. The repair technology is simple: clean, degrease, apply glue, press.
☑️ Boat check before season
⚠️ Warning: Never use cyanacrylate-based adhesives (superglues) or solvents containing acetone to repair PVC, which destroy the material's structure, rendering the patch useless and damaging the balloon around it.
Winter storage should be at room temperature in a dry room, so extreme temperature and frost make PVC fragile, and if the boat is wintering in an unheated garage, let it warm up to room temperature before unpacking and pumping.
Frequently Asked Questions (FAQ)
Can I use the boat Velbot Canysh in winter?
Yes, PVC material retains elasticity at low temperatures, but operation requires caution. In the cold, the material becomes more rigid, and the risk of damage to it when hitting the ice increases. It is recommended to use special frost-resistant greases for valves and not leave the boat inflated in the cold for a long time unattended.
Which glue is best for repair?
The best choice is two-component polyurethane adhesives specially designed for PVC (e.g. Texacol, Kleyberg or the original manufacturer's remixes) that create an elastic seam that does not crack when the cylinder is deformed.
Do I need to register a boat with GIMS?
Registration is subject to boats weighing more than 200 kg (together with the engine) or with an engine powering more than 8 kW (about 10.8 hp). PVC-boat lighter and weaker engine, registration is not required, but the presence of documents confirming the power of the engine and the weight of the boat, it is desirable to have.
How long does a PVC boat last?
With careful operation and proper storage, the service life of a high-quality PVC reinforced boat is 10-15 years or more. The main enemy of the material is ultraviolet, so storage under an awning or in a case significantly prolongs the life of the product.