Choosing a swimming aid for fishing or hunting is often a difficult task, requiring a balanced approach and in-depth market analysis. boat Reid 370It's a model that's proven to be a reliable and functional option for all kinds of water bodies, and it's a model that's not only very affordable, but also very sophisticated, even with a small wavelength, in terms of the geometry of the body.
In this article, we will analyze in detail all aspects relating to this model, starting from the materials of manufacture and ending with the nuances of driving qualities. Reid 370 People who are looking for a balance between load capacity and maneuverability are often chosen, so understanding its design features will be key to a successful purchase, and you will learn why this size range is considered one of the most popular with amateur fishermen and tourists.
It is worth noting that the manufacturer is constantly improving the technology of gluing and cutting, but the basic principles remain unchanged, ensuring the predictability of the behavior of the vessel on the water. maximum load capacity of 650 kg It's only possible to do this with the right seating and equipment, which we'll discuss below. Let's dive into the technical details.
Design features and materials
The basis of durability of any inflatable boat is the quality of the material used. Reid 370, the manufacturer uses reinforced PVC density of 850 g / sq.m., which is gold-standard This material is highly resistant to abrasion, is not afraid of contact with gasoline and oils, and also retains elasticity over a wide range of temperatures.
And welding technology, which is used in cylinder assembly, is particularly noteworthy. Unlike adhesives, welding creates a monolithic structure that eliminates separation under stress and time. boat Reid 370 less susceptible to temperature changes, which is important for regions with hot summers or cool springs.
The secret to stitching
When welded thermally, PVC molecules fuse together, making two pieces of tissue a single unit, and the only way to break this seam is to damage the tissue itself, not the joint.
The design of the cylinders provides for independent compartments, which ensures buoyancy even in the case of a puncture of one of them. pile-system Or the inflatable floor of the NDNDM, depending on the modification, which significantly affects comfort and assembly speed, and the choice between these options depends on your priorities: speed of deployment or floor rigidity.
Technical specifications of the model
Dimensions and weight parameters are decisive when choosing a transport for delivering a boat to the place of descent. Raid 370 It has an optimal length of 370 cm, which allows you to accommodate up to four people on board, although two or three fishermen with a full set of equipment will be most comfortable here.
Below is a table with the basic technical data to help you compare this model to the competition:
| Parameter | Meaning | Unit of measurement |
|---|---|---|
| Total length | 370 | centimeter |
| Breadth of cylinder | 165 | centimeter |
| Load capacity | 650 | kilogram |
| Weight of kit | 52-56 | kilogram |
| Engine power (max) | 15-18 | hp |
It is important to consider that the stated maximum power of the motor of 15-18 hp is a manufacturer's recommendation for safe operation, exceeding these values can lead to deformation of the transom or loss of handling at high speeds. transom plate made of moisture-resistant plywood and reinforced with metal linings, which ensures reliable fixation of the engine.
The optimal power of the engine for the full load of the boat is 9.9 hp, which avoids the need to register with the GIMS.
Completement and ergonomics
The interior of the boat is tailored to the needs of fishermen and tourists, and standard equipment usually includes two inflatable seats (Banc) attached to the lyctross, and a carry-on bag, however, many owners prefer to order additional accessories immediately to improve comfort.
ergonomics Reid 370 It allows you to move freely around the cockpit, which is especially important when catching large fish or installing a tent, and the presence of safety leors around the perimeter of the cylinders ensures the safety of passengers, allowing you to hold tight when you move along the wave.
- 🎣 Fishing attributes: Possibility of installing rod holders and an anchor table.
- ⚓ The hinged elements: presence of reinforced handles for carrying and rim bolts for anchor.
- 💺 Comfort: Possibility of installing rotary seats on the racks.
The valve system is worth mentioning separately, and the model uses high-pressure valves that ensure tightness and allow air to be quickly ejected when needed, and the valve design eliminates spontaneous etching of air, which is critical for long-distance hikes.
Driving performance on the water
The behavior of the boat on the water directly depends on the shape of the cylinders and the type of bottom. Raid 370 It has a very good wave swelling, because it's a high balloon and a narrowed nose, and it allows you to overcome the wind surge and the quilt from passing boats with minimal spray in the cockpit.
⚠️ Attention: When moving against a wave at high speed, always slow down to avoid nose-to-water impact and loss of control of the vessel.
With a 9.9 hp engine, the boat is glides with one passenger almost instantly. With full load, acceleration takes a little longer, but the mode is real even with fuel and equipment. The steerability on the course is rated by the owners as high, the boat does not prowl and confidently holds the trajectory.
An important aspect is the roll on the corners. With a width of 165 cm, boat Reid 370 It has good stability, but sharp steering at high speed requires a certain caution from the driver. Centrifugal force can shift the center of gravity if passengers do not move in the direction of turning.
Comparison of modifications: floorboard vs NDND
Buyers often face the choice of the type of bottom: classic floorboard (plywood plates) or low-pressure inflatable floor (LDPB). advantages and disadvantageswhich directly affect the experience of operation.
The solder floor provides a perfectly flat surface that is comfortable to walk on and better protection from puncture from the bottom. However, the build of such a boat takes longer (15-20 minutes), and the weight of the paiole significantly increases the total weight of the kit.
☑️ Assembly of a paiole-floor boat
The modification with NDNDM is assembled much faster (5-7 minutes) and has better heat and sound insulation. NDNDM bottom forms full-fledged keel lines, improving driving performance, but requires more careful handling on rocky shores. NDNDM fishing is often preferred for the ability to kneel at any point of the cockpit.
Maintenance and durability
Term of service Reid 370 It depends on storage conditions and regularity of care. PVC material does not like prolonged exposure to direct sunlight in a pumped state, so it is better to shade the boat at the parking lots or slightly put pressure on it. Regular washing with fresh water after operation in salt water or dirty water bodies is mandatory.
Storage should be carried out in a dry room at a temperature not lower than -20 ° C and not higher than +40 ° C. Before packaging for long-term storage, all elements should be thoroughly cleaned and dried to prevent mold formation and oxidation of metal parts.
Lubricate the valves with silicone lubrication once a season - this will prevent the mechanism from boiling and ensure tightness.
- 🧼 Cleanup: Use only soap solutions, avoid aggressive chemicals.
- ☀️ Defense: Use special sprays with UV filters to extend the life of the tissue.
- 🔧 Audit: Check the condition of the joints and valves before each season.
With proper care boat Reid 370 It can serve the owner for more than 10 years, retaining its technical specifications, and minor damage is easily repaired with a remix that comes as standard, making operation independent of service centers.
FAQ: Frequently asked questions
Do I need to register the boat Reid 370 in GIMS?
Registration depends on the total weight of the boat in gear. If the weight of the boat with the engine and attachments (but without fuel and passengers) exceeds 200 kg, registration is mandatory. The boat itself weighs about 55 kg, so with a light engine up to 10 hp (about 25-30 kg) you can stay within 200 kg and avoid registration.
What is the optimal height of the transom for this model?
The standard transom height is 40-45 cm (size S), which is suitable for most short-legged motors. If you plan to use a long-leg (L) motor, you may need to install a stretcher or choose a high-transm modification so that the lower unit does not touch the bottom.
Is it possible to use a boat in winter?
Operating at subzero temperatures is possible, but it requires caution. PVC becomes tough, and the risk of damage when hitting ice or rocks increases, it is recommended to use the boat at temperatures not lower than -10 ° C and avoid sharp cloth overflexes.
What is the difference between Raid 370 and its competitors (Flagman, Hunter)?
The main difference lies in the cut of cylinders and the density of PVC used. Reid Often uses a denser material (850 g / sq.m. against 750 in budget competitors) and pays more attention to welds, which gives a gain in reliability, but can affect weight.