Among anglers who value reliability and affordability, the Remington 190 holds a special place, a project that has become a legend in the circles of home-makers and small-series factory manufacturers, presents the perfect balance between carrying capacity and maneuverability. Aluminum case This model allows you to feel confident both on calm water bodies and on rivers with a moderate current.
Many people wonder why this particular model is so interesting, and the answer lies in a time-tested design that minimizes the risks of operation. remington 190 It does not require complex maintenance, like some composite counterparts, and forgives many mistakes for beginners. If you are looking for a versatile fishing or recreational vessel, this option is worth a detailed consideration.
In this article, we will analyze all the nuances, from geometric dimensions to the features of self-assembly. Technical dataThe following will help you make an informed decision about buying or building your own boat, and we will also touch upon safety issues that are often ignored in the pursuit of savings.
Main technical specifications and dimensions
Boat size is a determining factor in choosing transport for transportation and storage. remington 190 It's designed to fit into standard trailer sizes and fit easily in the garage, and has a 3,800 mm hull on the deck, which makes it a medium-sized motorcycle.
Midel Spangout is 1900 mm wide, which is exactly the name of the model and provides excellent stability. tipping-over The 500 mm height of the cockpit provides a comfortable volume of the cockpit, allowing the equipment and passengers to be accommodated without compromising safety.
The most important parameter is the load capacity, which in this model reaches 600 kg. This allows you to take on board three adults with a full set of gear or two fishermen with an outboard motor up to 30 hp. The maximum speed with a 25 hp engine can reach 35 km / hThis is a great indicator for this shape.
The weight of the body itself, without equipment, is about 130-150 kg, depending on the thickness of the sheet used and the configuration, which already requires the use of a trailer for transportation, although the theoretical option of carrying four people is extremely rare in practice.
Design features of the body and bottom
Basis of reliability remington 190 It's a well-designed bottom, and it's V-shaped, with a very pronounced keel, and the keel-to-knee angle on the transom is about 10 to 12 degrees, and this geometry allows the boat to confidently cut the wave and ensures gentleness, which is critical for long transitions.
For the skin used aviation aluminum brand AMG5M or AMG61TThe thickness of the bottom sheet usually varies from 3 to 4 mm, which guarantees resistance to impacts on stones and melters. Boards that experience less stress are often made of a sheet thickness of 2 mm, which allows you to reduce the overall weight of the structure without loss of strength.
⚠️ Note: When self-constructing, it is absolutely impossible to replace aluminum alloys with ordinary steel or less durable grades of aluminum (for example, AMC), this will lead to rapid corrosion and loss of sealing of seams in the first seasons of operation.
The nose has a sealed floorboard box that has a dual function. sluggishness Second, it's a convenient place to store things that need to stay dry, and the design of the box strengthens the nose, preventing it from deforming when hit by a wave.
The boat's trawler is reinforced, with an angle of inclination, suitable for the installation of standard outboard motors with short or long daywut. Factory models are often equipped with welded brackets for mounting the engine, which eliminates the need for hinged transom boards.
Setup and internal arrangement of the cockpit
The interior of the boat is designed with ergonomics in mind, and standard equipment usually includes two fixed cans of seats located on the sides and one removable seat in the middle, which allows you to place three people face to each other or deploy the seats as you go.
The cockpit floor is often made of corrugated aluminum or wooden sleigh. Riffled surface It is preferable because it does not absorb water, does not rot and provides a reliable grip of shoes even in a wet state. Wooden decking requires regular drying and treatment with antiseptics.
- 🛶 Banks: Made of aluminum sheet with selection for rigidity, attached to the sides on brackets.
- ⚓ Ducks: In the bow and aft parts, welded ducks are provided for fastening the anchor tile and mooring ends.
- 🪜 Steps: The foreshore often has small steps or handles for ease of landing from the water or pulling the boat ashore.
In addition, the sides can be welded pockets for fishing rods or drawers for a gas tank. remington 190 They are equipped with windshields installed in front of the front seats, which significantly increases comfort when driving at high speed.
When ordering or building a boat, immediately provide for the installation of bolts around the perimeter of the board. This will make it easy to attach awnings, sonars or additional levers, without drilling the hull during operation.
Comparison with peers and competitors
In the metal boat market, remington 190 There are some direct competitors, like the Kazanka, or the Ob boats, but the 190 model benefits from a more modern bottom shape and better seaworthiness, and unlike the flat-bottom boats, it allows you to go out at a higher wave.
Compared to larger models, such as those 4 meters long or more, the Remington 190 is better off in weight and power requirements. It only takes a 15-20 hp engine to drive it, while larger cases require a minimum of 30-40 hp to go full load.
| Parameter | remington 190 | Kazanka-M | Ob-2. |
|---|---|---|---|
| Length, m | 3.8 | 4.0 | 4.2 |
| Width, m. | 1.9 | 1.6 | 1.65 |
| Load capacity, kg | 600 | 400 | 500 |
| Recommended power, hp | 30 | 20 | 40 |
Cost of ownership is also an important factor, and with less fuel consumption and the ability to use a less powerful motor, the operation of the vehicle is very difficult. remington 190 It's cheaper in terms of motor hour, and it's also not that aluminum body requires painting every season, unlike steel.
Features of independent construction and welding
For those who have decided to build a boat DIY, Remington 190 is one of the most affordable. Drawings are widely distributed on the network, and the assembly technology does not require complex slipping equipment. argono-arc welding (TIG) or high-quality semi-automatic welding in a protective gas environment.
The assembly process begins with the patterning of sheets, and it is important to use only sharp tools and keep the edges clean. Before welding, aluminum must be thoroughly cleaned and degreased, since oxide film can cause pores to appear in the seams.
☑️ Preparation for welding of the shell
Welding seams is better done "on the break", using the filler wire of the appropriate brand (for example, SvaMg6). Start with the bottom seams, gradually moving to the sides and transom, special attention should be paid to the angles where the three planes converge - there is a high risk of burning or indigestion.
⚠️ Warning: Do not try to boil aluminum with a conventional electrode without gas or solder it with tin. Such compounds will not withstand the loads on water and can lead to catastrophic consequences. Only argon or a quality semi-automatic machine!
Once welding is complete, the hull is pressed, the boat is supported and filled with water, carefully inspecting all the seams for leaks, if leaks are found, they are re-brewed, and only after successful pressing can the paiola and equipment be installed.
Where can I find quality drawings?
Complete sets of drawings with sweep sheets are often sold on specialized boat modeling forums or in the print editions of the Modeler-Constructor series. Free versions on the Internet can contain errors in scale, so always double-check the dimensions by checkpoints.
Operation, maintenance and storage
An aluminum boat does not require complex maintenance, but some rules do exist: after each unloading, especially from salt water, the hull must be rinsed with fresh water, which prevents the development of electrochemical corrosion that can occur when aluminum comes into contact with other metals (for example, brass screws).
Store remington 190 If the boat is standing on the water for a long time, you need to use antifouling coatings or regularly raise the hull to clean up algae and shells. Prolonged standing on the water without protection can lead to fouling and weight gain.
- 🔧 Audit: Once a season, check the condition of welded seams and rivet joints (if any).
- 🧼 Wash: Use soft detergents, avoid abrasive sponges that can damage the oxide film.
- 🛢️ Lubricant: Regularly lubricate the movable elements of the seat and duck anchorages.
Winter storage is easy: just turn the boat over, clean the dirt and snow and leave in any dry place. Aluminum is not afraid of frost and temperature changes, making it an ideal material for a climate with harsh winters.
The main secret of long service of an aluminum boat is the absence of contact of dissimilar metals in the water and regular washing with fresh water after use in a salty environment.
Legal aspects and registration in GIMS
According to the current legislation of the Russian Federation, registration in GIMS are subject to small vessels weighing more than 200 kg or with an engine power of more than 8 kW (about 10.8 hp). remington 190 In running order, often exceeding 200 kg (especially with the engine and equipment installed), registration is likely to be mandatory.
For homemade boats, the registration procedure may be complicated by the need to undergo a technical inspection, you will need to provide drawings, buoyancy calculations and a pressing certificate, and in some cases, you will need the participation of a certified professional to confirm the safety of the structure.
If you buy a factory-made boat, all the necessary documents (passport of the product, certificate of conformity) are already included, which greatly simplifies the process of registering and obtaining a boat's ticket. Always require a full package of documents from the seller before buying.
Do I need to register a boat if the engine is weaker than 10 hp?
Yes, if the weight of the boat itself, together with the installed equipment (but without fuel and people) exceeds 200 kg. For Remington 190 this is almost always true, since the weight of the empty hull is about 130-150 kg, and the motor, battery and anchor easily exceed the limit.
Can I increase the engine power above the recommended?
Theoretically, it can, but it's dangerous. The increase in power requires the transom to be re-modeled and the alignment to be changed, and if you exceed the passport power, you lose your right to insurance indemnity in the event of an accident and you can get a fine from GIMS for operating violations.
What is the life of an aluminum boat?
When properly operated and without mechanical damage, the aluminum case lasts 30-50 years or more. Aluminum does not rust like steel, and its oxide film protects the metal from further destruction. The main enemy is galvanic pair with other metals.
Where to buy: new or used?
The new boat ensures no hidden welding defects and modern design. The second option may be more profitable financially, but requires careful inspection of the seams for cracks and repairs. For Remington 190 bpd, the market is quite active, as many build them themselves and then sell them.
Does the shape of the bottom affect fuel consumption?
Yes, the V-shaped Remington 190 bottom creates more drag at low speeds than flat-bottoms, but on planing it provides a softer ride and stability. Fuel consumption will be medium, optimized by the correct selection of propellers and loading of the boat.