Choosing a reliable fishing boat or a family vacation on the water often leads to a compromise between comfort and mobility. Boat Reef 380 It is a prime example of how you can combine the capacity required for three people with the ability to quickly assemble and transport in the trunk of a passenger car. In the inflatable range, it is one of the most popular models due to its versatility and proven design.
The design has been focused on improving the performance and safety of the crew, and is equipped with an inflatable floor, which allows you to achieve higher speeds with less fuel consumption than the soldering counterparts. In this material, we will discuss in detail the design features, technical nuances and practical experience of using the system. Reef 380 under different operating conditions.
You will learn why this dimensional range often becomes the “middle ground” for avid anglers. We will look at the features of materials, cockpit ergonomics and hidden tuning capabilities that will unlock the potential of your boat by one hundred percent.
Design features of the body and materials
The basis of reliability of any inflatable vessel is the quality of the materials used. Reef 380 made of five-layer reinforced high-density PVC fabric, which is resistant to ultraviolet radiation, fuel and lubricants and mechanical damage. Tightness seams are achieved by using hot air gluing technology, which excludes stratification even with prolonged exposure to load.
The cylinders have complex geometry with protective pads in areas of high friction, and this is especially true for the nose and transom, where the most frequent contact with the mooring elements or the bottom when being pulled ashore. timber along the entire perimeter, which not only protects the board, but also serves as a convenient place for grabbing with your hands when landing.
⚠️ Warning: When standing in the sun for long periods, be sure to use an awning or lift your nose to avoid excessive pressure in the cylinders, which can lead to deformation of the seams.
The bottom of the boat is inflatable keel (BBH), a key feature of this model, which allows the hull to take a streamlined shape already under partial pumping, providing excellent germination on the wave. five-chamber The boat is not to be sunk even if one of the compartments is damaged, which is a critical safety factor in the high water.
inflatable floor benefits (BBB)
Going to the inflatable floor dramatically changes the experience of operating a small vessel. weight down The kit is assembled, which makes it easier to load and unload, and the absence of metal or plywood elements inside the cockpit makes boarding and moving around the boat much more comfortable.
The inflatable floor forms a full-fledged keel that improves course stability and reduces yaw on the wave, especially when you move against the wind or when you drift wind laterally during fishing, and the rigidity of the structure is achieved due to high internal pressure, which sets the necessary rigidity of the profile.
Effect of pressure on driving performance
With insufficient keel pressure (less than 0.2 atm), the boat can behave sluggishly, hold its course worse and lose speed faster. It is recommended to pump the keel after the main set of speed, when the material is slightly stretched from heating.
The important aspect is thermal insulation. When you're out in the water, you don't come into contact with cold water or sun-hot metal, because there's an air gap between you and the water. Reef 380 suitable for use in a wider temperature range, including early spring and late autumn.
Ergonomics of the cockpit and equipment
The interior of the boat is designed to be as comfortable as possible for the crew, and the width of the cockpit allows three adult passengers to comfortably accommodate without feeling crowded. Banks. (seats) are made of moisture-resistant plywood with anti-slip coating and have the ability to adjust the position along the sides.
The equipment is equipped with special rings and holders, often with anchor snare in the bow, and often with stern mounts for rod holders. sling on cylinders allows you to securely secure the cargo or additional equipment, without fear of its falling overboard.
- 🎣 Convenient pockets for small things in the nose for storing tackles.
- ⚓ Reinforced carry handles located in balancing points.
- 🛡️ Protective pads on the transom to prevent the tissue from being rubbed with cables.
- 💨 Rapid air-emitting valves to accelerate assembly/disassembly.
And the special thing to do is to organize the space underneath your feet, and the bottom is designed to let the water that gets in there flow into the stern, where it can be easily removed with a sponge or a scoop without getting up, and this keeps the clothes and equipment dry throughout the walk.
Technical specifications and compatibility with motors
Model Reef 380 The optimal power of the outboard motor varies from 15 to 25 hp Installation of a more powerful engine is possible, but requires caution and experience, as it can lead to excess design speed and loss of controllability.
The transom board is reinforced and protected from water, which prevents it from swelling and deforming. The height of the transom is standardized for most common motor models. It is important to consider not only the power but also the weight of the day-woot when choosing a motor, so that the stern is not overloaded.
| Parameter | Meaning | Unit of measurement |
|---|---|---|
| Length overall | 380 | centimeter |
| Oversize width | 165 | centimeter |
| Capacity | 3 | man. |
| Load capacity | 550 | kilogram |
| Weight of kit | 48-52 | kilogram |
Speed specifications directly depend on the load and condition of the water surface. With one passenger and a 15 hp engine, the boat easily goes into planing, developing speeds up to 30 km / h. At full load, for confident planing, power closer to 20 hp will be required.
Preparation for launching: checklist
Safety on the water begins long before the boat touches the water. Proper preparation Reef 380 It takes 15 to 20 minutes to operate, if you follow a well-established algorithm, and ignoring some of the steps can lead to unpleasant situations on the water.
☑️ Preparing the boat for the season
The first step is to straighten the boat on a flat surface, clearing the place of sharp objects. Pumping is done sequentially: first cylinders to working pressure (usually 0.2-0.25 atm), then the keel.
⚠️ Warning: Never leave a fully pumped boat unattended in direct sun for more than 10-15 minutes, especially in hot weather. This can cause the seams to rupture.
Once the transom and cans are installed, check the safety of the locking, make sure that all the belts are tightened, and the safety files on the anchor frock are not confused, and only after a visual inspection can the equipment and crew be loaded.
Off-season maintenance and storage
Durability Reef 380 It depends on how you care for it after use, PVC requires regular freshwater washing, especially after swimming in salt water or contaminated water bodies, and salt and silt can crystallize in the folds of the fabric, damaging the protective layer during subsequent pumping.
Drying is a critical step, and you can't put a wet boat in a bag, because it's going to cause mold and decay. Dry the product is necessary in the shade, in straightened form, until the complete disappearance of moisture in all folds and valves.
To extend the life of the valves, lubricate their threaded part with silicone lubrication once a season, which will prevent acidification and ensure leakage.
Store the boat in a case, in a dry room at a temperature of -20 to +40 degrees. It is recommended to periodically (every few months) lay and pump the boat to check the tightness and "tighten" the material, preventing the adhesion of layers.
Frequently Asked Questions (FAQ)
Can I use the Reef 380 to go to sea?
Use is only possible in coastal areas in favorable weather conditions and no storm warning, but the design is not designed for high seas and large waves, life jackets and communication equipment are required.
What is the optimal pressure in fishing tanks?
Optimal pressure is considered to be 0.2 atm. To the touch, the board should be hard, but with a strong press of the finger, slightly bend (about 1 cm). Pumping is dangerous in the heat, underpumping reduces the rigidity of the body.
How to repair small punctures in the field?
For emergency repairs, use polyurethane-based rempleks or special adhesive tapes for PVC. Full repair with warming is better carried out at home, using two-component glue.
Will the boat fit in the trunk of the sedan?
In folded form, the dimensions of the bag allow you to transport Reef 380 in the trunk of most sedans and hatchbacks, however, you may need to fold the rear seats or free space from unnecessary things.
Do I need to register a boat with GIMS?
According to the current legislation of the Russian Federation, inflatable boats with a carrying capacity of less than 225 kg and with an engine capacity of less than 8 hp (inclusive) are not subject to registration. Reef 380 The vehicle has a load capacity of more than 225 kg, so it formally requires registration, even without a motor.