Choosing a swimming aid for fishing or relaxing on the water often becomes a difficult dilemma, especially when it comes to the trade-off between load capacity, comfort and mobility. Riverbot 370 NDLD - this is a model that has been occupying a stable position in the niche of middle-class inflatable boats for several years, offering buyers a unique floor design. low-pressure This is the very “chip” that distinguishes this bot from hundreds of analogues with plywood or aluminum decking.
In this article, we will analyze in detail all aspects of the operation of this model, from the features of the assembly to the behavior on the wave. inflatable floor It changes the way we store and transport, making the boat lighter than the classic versions, but it makes some adjustments to the rigidity of the structure, and understanding these nuances will allow you to make an informed decision about buying.
It is worth noting that RiverBoat He has established himself as a manufacturer, paying attention not only to materials, but also to ergonomics. Model 370 NDND is equipped with developed inflatable tubes that provide excellent swelling even at full load. This is a critical parameter for those who plan to go to large reservoirs or Lake Ladoga, where calm is a temporary phenomenon.
Design features and materials
The basis of the durability of any inflatable boat is the material from which its cylinder is made. Riverbot 370 It uses high-strength reinforced PVC, which is highly resistant to abrasion and ultraviolet radiation. The density of the fabric is usually 800-900 g / sq. m, which is gold-standard for boats of this size, providing a balance between weight and strength.
The company uses hot air welding technology to make the materials monolithic, which eliminates the possibility of stratification even under extreme stress or prolonged exposure to the sun. Tightness The compartments are preserved for years, provided proper care and storage in a dry place.
⚠️ Warning: Despite the high strength of PVC, avoid contact with sharp objects on the shore. Even one puncture in the keel area can require serious repairs in the field.
The cylinder design includes hinge bars around the perimeter, and it's not just a decorative element, but an important functional part that protects the side from impacts on the berth or on the side of another boat. The trunk section reinforced by additional overlays, since it is here that the main loads from the outboard motor are concentrated.
When buying, be sure to check the equipment: the availability of the remix, pump and bags may vary depending on the batch and supplier.
Anatomy of the sex of NDND: pros and cons
The most discussed part of this model is the floor. NDMA (Low Pressure inflatable floor) Unlike the classic plywood or aluminum paiola, here the bottom is a separate inflatable cylinder that is inserted into the housing and inflated to working pressure, a solution that has its own unique advantages.
The main advantage is the weight and compactness. Riverbot Boat 370 NDND When assembled, it takes up less space in the trunk of the car and is easier to carry in your hands, because there are no heavy sheets of flooring. It takes less time to assemble: you don't have to pull stringers and dock plates, you just need to straighten the bottom and pump it.
But there's a downside to this design, and the hardness of the NDND floor is lower than that of a rigid flooring, and in a high-powered plane, the bottom can be slightly bent ("play"), which is felt by the feet. bottom It is more vulnerable to punctures from below, for example, when pulling a boat onto a rocky shore.
Secrets of Sex Stringency of the NDPT
To increase the rigidity of the floor, manufacturers introduce a system of internal stretching tapes (I-beam), which prevent the balloon from swelling into thickness, directing pressure into the plane, which creates a “tense drum” effect.
However, for a throw fishing or spinning from anchor, the comfort of this floor is higher than that of plywood, as it is warmer and softer. Heat insulation In cold water, it becomes a noticeable advantage, keeping the body warm for longer.
Seaworthiness and behaviour on the water
How he behaves. RiverBoat 370 With its length of 3.70 meters and wide nose, the boat has excellent swelling. High pressure cylinders (250 mbar) act as powerful buffers, extinguishing the impacts on the water, which allows you to feel confident even in the wind of 3-4 points.
The model's course stability is worth mentioning: the wide cockpit and proper weighting allow the boat to go smoothly, not squeezing from side to side. When you install a 9.9 hp engine, the boat easily goes into plane even with two passengers on board. planing This is a mode of movement in which the boat slides on the surface of the water, which significantly saves fuel.
- 🌊 Excellent swelling due to the high nose balloon.
- ⚓ Stable position at anchor due to the wide hull.
- 🚤 Quick access to planing mode of catfish up to 250 kg.
It is important to consider that the sailing speed of inflatable boats is higher than that of metal or fiberglass counterparts. In strong side winds, course correction may be required. The keel line It is clearly expressed, which helps to keep the direction better, but the sailing does not fully compensate.
Compatibility with motors and transoms
Train boat Riverbot 370 NDLD It's made of high-strength moisture-resistant plywood, and it's lined with fiberglass or reinforced plastic, and it's a standard and reliable solution that can withstand the vibration loads of an outboard motor, and the transom height is a standard 508 mm (20 inches), which is suitable for most long leg engines.
The optimal power of the engine for this model is in the range from 9.9 to 15 hp Nine will allow you to comfortably move from fishing home at decent speed, and the fifteenth engine will reveal the speed potential of the boat. maximum capacity It is limited not only by the design of the transom, but also by the carrying capacity of the boat itself.
| Parameter | Meaning | Comments |
|---|---|---|
| Boat length | 370 cm | Optimal for 2-3 people |
| Cockpit width | 146 cm | Spacious for two fishermen |
| Load capacity | 550-600 kg | Including boat and motor weight |
| Boat weight | ~52 kg | Depends on the configuration. |
When installing a heavy four-stroke engine on a transom, it is recommended to use transom wheels. They do not come as standard, but their installation greatly simplifies the launching of the boat and climbing to the trailer. transom wheels This must-have accessory for boats over 3.5 meters long.
⚠️ Attention: When installing the engine, watch the angle of the trim. Too high an engine lift can lead to cavitation and overheating of the engine, and too low can lead to loss of speed and splashing of the cockpit.
Completement and ergonomics
ergonomics Riverbot 370 It's designed for active use, and inside the cockpit, there are soft inflatable seats (banks) that are fixed to special lyctross mounts, which allow them to be positioned or removed altogether, making room for large prey or cargo.
On the sides are liners that can be held when swimming or mooring, and there are also handles for carrying, which facilitates the transportation of the boat in disassembled form. Effort valves in cylinders prevent the boat from inflating in the sun, automatically releasing excess air.
- 🎣 Convenient mounts for the installation of sonar and navigator.
- 💡 Reflective elements for safety in the dark.
- 🛡️ Reinforced linings on the bottom to protect against abrasive.
The bow is often equipped with an anchor, although the base may not have an anchor, ideal for this model for anchors such as Cat or Grapple weighing 3-4 kg. The larger is already redundant and can create problems when sampling anchors.
☑️ Checking before getting on the water
Care, storage and maintenance
And Riverbot 370 NDLD You've been in the boat for years, and you have to follow simple rules of operation, and after every fishing, especially in salt water or in polluted water, you have to rinse the boat with fresh water, and salt and silt contribute to the breakdown of PVC and the corrosion of metal elements.
Keep the boat in a cool, dry place, protected from direct sunlight. Prolonged exposure to UV radiation causes plastic to age, making it brittle. The ideal storage temperature is from +5 to +25 degrees Celsius. Conservation In winter, it requires a complete drying of all valves and folds.
Regularly check the pressure in the cylinders with a pressure gauge. Insufficient pressure leads to deformation of the housing and increased wear of the seams, and excessive pressure leads to the risk of rupture in hot weather. The optimal working pressure is indicated in the product passport and is usually 0.2-0.25 atm.
⚠️ Warning: Never keep the boat fully pumped in a warm room in winter, and the temperature difference can lead to a critical change in air volume and damage to the seams.
For minor puncture repairs, use polyurethane glue-based remixes. Large damages are best left to professionals in specialized workshops. Self-repair complex nodes can violate the tightness and deprive of warranty.
Proper drying and storage at room temperature is a guarantee that your boat will last 10 years or more without losing its tightness.
FAQ: Frequently asked questions
Can the Riverbot 370 NDNDM put the engine more than 15 hp?
Technically, the transom will withstand 20 hp, but manufacturers do not recommend exceeding the limit of 15 hp for safety and controllability reasons.
How long does it take to assemble and disassemble a boat?
The first assembly can take 20-30 minutes. With experience, the assembly and disassembly process Riverbot 370 It takes about 10-15 minutes, especially if you use an electric pump to pump the cylinders first.
How reliable is the inflatable floor when fishing?
The floor of the NDND is quite reliable for fishing, tourism and recreation, but for frequent access to rocky shallow waters or breakwaters, boats with a hard aluminum bottom are preferable, since the risk of puncture is still higher.
Will the boat fit into the trunk of the sedan?
In the standard trunk of the sedan Riverbot 370 In a regular bag, it probably won't fit because of the length, you'll need to fold the rear seats or use a roof trunk/trailer, and a hatchback or station wagon usually comes in.