Boat. Roger Sphere 350 This compact but spacious PVC boat combines strength, maneuverability and affordable price, making it an ideal choice for both beginners and experienced water-engineers. Roger MarinIt is known for its reliable and locally adapted boats.
In this article we will discuss in detail specification, design and practical nuances of operation Spheres 350You'll learn what engines are right for this boat, how to transport it properly, what accessories to buy, and tips for maintenance and repair, and you'll pay special attention to comparing it with the analogues and reviews of real owners, which will help you make an informed choice.
Technical specifications of the boat Roger Sphere 350
Model Sphere 350 belongs to the class of PVC inflatable boats with a hard bottom (type) NDMA This means that it combines lightness and compactness in transportation with stability on water.
- 📏 Length: 350 cm (3.5 m)
- 📐 Width: 155 cm
- 🔄 Diameter of cylinders: 42 cm
- 🏋️ Load capacity: up to 500 kg (or 4 persons)
- 🛳️ Maximum engine power: 15 hp (recommended - 9.9 hp)
- 🧵 Material: PVC 750 g/m2 (reinforced, with protection against UV radiation)
- ⚖️ Weight: 38 kg (without motor and accessories)
The peculiarity of the model is V-keelIt's a system that improves wave performance and reduces water resistance, which makes the boat more stable when driven by the engine, even in moderate wind conditions. Spheres 350 It is made of the same PVC as the cylinders, but has additional reinforcement to protect against punctures.
| Parameter | Meaning | Note |
|---|---|---|
| Number of cans | 3 | Including a keel jar to improve handling |
| Type of transom | Inflatable (with the possibility of installing a rigid) | Suitable for motors up to 15 hp |
| Completement | Boat, paddles, pump, repair kit, bag for transportation | In the basic version |
| Pressure in cylinders | 0.25–0.3 kg/cm2 | It is recommended to check the manometer |
An important nuance: the boat is certified for use with engines up to 15 hp, but the manufacturer recommends limiting 9.9 hp to save PVC life and improve handling. Exceeding the recommended power can lead to deformation of the transom and deterioration of driving performance.
Advantages and disadvantages of the model
Like any boat, Roger Sphere 350 It has its strengths and weaknesses, and let's look at them in detail so you can see if this boat is right for you.
Pros:
- ✅ Universality: Suitable for fishing, hunting, tourism and family holidays.
- ✅ Ease of transport: Weight 38 kg allows you to carry a boat in the trunk of a passenger car.
- ✅ Durability of PVC: the material is resistant to abrasion and punctures, withstands temperatures from -30 ° C to +60 ° C.
- ✅ Good sustainability: The width of 155 cm provides comfortable accommodation for 2-3 people.
- ✅ Price: one of the most affordable in its class (from 80 000 to 120 000 rubles, depending on the configuration).
Cons:
- ❌ inflatable floor: less rigid than aluminum or plywood flooring, which can create discomfort during prolonged exposure to water.
- ❌ Motor limit: 15 hp is the maximum, but for full planing may not be enough.
- ❌ Difficulty of repair: In case of serious damage to PVC, professional recovery is required.
- ❌ Noise: The inflatable floor can make clapping sounds on the wave.
Many of the disadvantages are compensated by the right choice of accessories, for example, to improve comfort, you can buy more. floor or high-backedAnd to increase speed, optimize the load and use the motor with the propeller of the right pitch.
Which engine to choose for the Roger Sphere 350?
Choosing a outboard motor is a critical point on which they depend. speed, manageability and security For swimming. Spheres 350 The manufacturer allows the installation of motors with a capacity of up to 15 hp, but in practice the optimal range is considered to be 5-9.9 hp.
Let’s look at the popular options:
- 🛶 Motors up to 5 hp: They're good for moving around in lakes and rivers without a strong current. Honda BF5 or Mercury 5MThe speed will be 10-15 km/h.
- ⚡ Motors 9.9 hp: It's the perfect balance between power and economy. Yamaha 9.9 FMHS or Tohatsu 9.8 It will allow you to get on plane with 2-3 passengers.
- ⚠️ 15 hp motors: They are possible, but they require a reinforced transom and careful handling, and when fully loaded, the boat can burrow its nose.
Important: When choosing a motor, take into account not only the power, but also the power. weight (optimum 40 kg) and management (tiller or remote). Spheres 350 Short-barreled motors are better suited (S - short shaft) with a 381 mm lower unit length.
⚠️ Attention: Installing a motor more powerful than 15 hp cancels the manufacturer's warranty and can damage the transom, and such boats are subject to registration with the GIMS, which entails additional costs.
Before buying the engine, check its compatibility with the transom of the boat. Some models require the installation of a transition plate or reinforcement of mounts.
Accommodation and necessary accessories
Basic equipment Roger Sphere 350 It includes a boat, a paddle, a pump, a repair kit and a bag for transportation, but for comfortable operation, you will need to buy a number of accessories.
Mandatory accessories:
- 🔧 Electric pump: A hand pump made of kit is suitable for emergencies, but for regular use it is better to purchase an electric one (for example, a hand pump). Bravo BP12).
- 🛟️ Anchor: for fishing on the course, an anchor weighing 3-5 kg with a rope 10-15 m long is required.
- 🪑 Seats: standard inflatable seats are inconvenient for long trips, folding seats with a transom mount are recommended.
- 🔋 Battery: If you plan to use a sonar or backlight, you will need a 12V battery (for example, a battery pack). Delta DT 1207).
Additional equipment:
- 🎣 Echoer: fishing models are suitable Garmin Striker 4 or Lowrance Hook Reveal 5.
- 🚤 Train reinforced: If you plan to use the motor close to maximum power, it is better to replace the inflatable transom with aluminum.
- 🧭 Navigator: For long hikes, a GPS-navigator with maps of water bodies is useful.
- 🛡️ Storage case: It will protect the boat from dust and UV radiation in the off-season.
The cost of complete equipment can vary from 30,000 to 100,000 rubles depending on brands and equipment. lifejackets, pump and repair-pack They should always be at hand.
☑️ Checklist before getting on the water
Transport and storage of the boat
One of the main advantages of inflatable boats is their compactness. Roger Sphere 350 When folded, it takes up little space, but requires the right approach to transportation and storage to avoid damage.
Transport:
- 🚗 In the trunk: The boat can be transported folded in a bag, the main thing is to avoid sharp objects and overheating (do not leave in a closed car in the sun).
- 🚛 On the roof: If the boat is inflated, use special mounts and a protective case. Maximum speed is 80 km / h.
- 📦 In the trailer: For long trips, it is convenient to use a trailer with soft fasteners.
Storage:
- 🏠 Indoors: Ideally, a cool dry place (garage, pantry) Temperature: from -5 °C to +25 °C.
- 🌳 Outside: Only under a canopy, in a cover, with partially deflated cylinders (to avoid deformation).
- ☀️ Long-term storage: Before wintering, the boat must be washed, dried and treated with a special PVC lubricant.
Critical error: keeping the boat inflated at negative temperatures leads to PVC cracking! Even if the boat is in a heated room, it is recommended to lower the cylinders by 30-40% of the maximum pressure.
⚠️ Attention: When transporting on the roof of the car, avoid speed modes above 80 km / h - this can lead to the separation of the boat from the mounts due to aerodynamic drag.
Repair and maintenance: how to extend the service life?
Boat life Roger Sphere 350 If you care for it properly, it's 7 to 10 years old, but even the strongest PVC needs regular maintenance.
Monthly care:
- 🧼 Wash: After each release, the boat should be washed with fresh water, especially if it was used in salty or contaminated water.
- 🧴 Processing: Apply a PVC protective agent once a month (for example, Polymarine PVC Protectant).
- 🔍 Inspection: Check the cylinders and bottom for punctures, cracks or adhesive detachments.
Puncture repair:
Small damage (up to 5 cm) can be repaired by yourself with a repair kit from the basic delivery.
- Clean and degrease the puncture site with acetone.
- Put the glue on.
PVC-90orGlue 88NPFor a patch and a boat. - Tightly press the patch and leave under load for 12-24 hours.
- After drying, check the tightness by inflating the balloon.
For serious damage (breaks, detachment of seams), it is better to contact a specialized service. The cost of professional repair varies from 3,000 to 10,000 rubles depending on the complexity.
What to do if the boat starts to lose pressure?
If the boat is lowering without visible punctures, the cause may be:
(1) Slightly twisted valve - check and replace the sealing ring if necessary.
(2) Microcracks in seams - treatment with a special sealant for PVC is required.
(3) Temperature variations - when cooled, the air in the cylinders is compressed, giving the illusion of leakage.
Comparison with analogues: which is better?
PVC boat market Roger Sphere 350 It competes with models from Flagship, corvette and barkLet's look at the key differences:
| Model | Length/Broadness | Load capacity | Max, engine power. | Price (from) |
|---|---|---|---|---|
| Roger Sphere 350 | 350×155 cm | 500 kg | 15 hp | 80 000 ₽ |
| Flagship 350K | 350×160 cm | 550 kg | 20 hp | 95 000 ₽ |
| Corvette 330 | 330 x 150 cm | 450 kg | 10 hp | 75 000 ₽ |
| Bark 360 | 360×165 cm | 600 kg | 15 hp | 110 000 ₽ |
Advantages of the 350 Sphere over competitors:
- 💰 Price: One of the most affordable in the segment.
- 🔧 Repairability: Widely distributed, parts and repair kits are easy to find.
- 📦 Package: The basic version has everything you need to start.
Disadvantages compared to analogues:
- 📉 Engine power: bal Flagship 350K 20 hp is permissible, which gives more opportunities for tuning.
- 🛡️ PVC protection: bal Bark 360 A thicker material (900 g/m2) is used.
If you need it. budget-and-reliable boat for fishing in small water bodies, Sphere 350 For long-distance hikes or for use with powerful motors, it is worth considering models from the Flagship or bark.
Roger Sphere 350 is ideal for beginners and fishermen who value a balance of value and quality, and for extreme conditions or professional use, it is better to choose a model with a reinforced PVC and a larger load capacity.
FAQ: Answers to Frequent Questions
❓ How many people can Roger Sphere 350 hold?
Officially, the boat is designed for 4 people (maximum load capacity - 500 kg), however, for comfortable movement, it is recommended to limit 2-3 adults with equipment.
❓ Can I install a stationary transom on this boat?
Yes, but it would require a reinforced aluminum transumerator from a manufacturer or a specialized workshop, and self-installation without experience could cause PVC damage.
❓ How often do I need to pump the cylinders?
Under normal conditions, the pressure in the cylinders lasts 1-2 weeks, however, before each release to the water, it is recommended to check the pressure with a pressure gauge and pump if necessary.
❓ Is Roger Scope 350 suitable for sea fishing?
The boat is not designed for use in marine environments due to its small size and limited wave stability, with maximum protected bays or estuaries in calm.
❓ What's the boat guarantee?
The manufacturer provides a warranty of 2 years for PVC and 1 year for fittings. The warranty does not apply to damage caused by improper operation or storage.