Choosing a reliable boat for fishing or family vacations on the water is always a balance between cost, capacity and safety. Rusbot 36The boat is a model that has proven to be a versatile option for small rivers and lakes, and it attracts attention not only for its price, but also for its design solutions that make it possible to feel confident on the water even for beginners.
Developed with Russian realities in mind, Rusbot 36 The metal body provides durability that is difficult to obtain from PVC analogues, while the weight of the structure remains quite acceptable for transportation on a passenger trailer. Many anglers note that this model has become the optimal entry into the world of water tourism for them.
In this article, we will go into detail all aspects of the operation of this model, from the geometry of the bottom and the quality of the welds to the nuances of the outboard motor installation. aluminum-magnesium alloy AMg5MThe corrosion resistance used in production is considered the standard for corrosion resistance in the budget class, and whether to overpay for additional options.
Design features and geometry of the body
The basis of any boat is its hull, and in the case of the 36 Series, engineers have relied on a time-tested scheme. flat-bottomed construction With small cheekbones, it provides excellent standing water stability, which is critical for catching a throw or setting up a tent, but it's worth considering that this geometry dictates its rules for behavior on the wave, making the boat more sensitive to lateral swing when moving for an outboard motor.
board Rusbota They are high enough to create a sense of security and prevent spray from entering the cockpit during moderate chop. transom plateThe stainless carcass, reinforced by additional scarves, is able to withstand the load from the engine with a capacity of up to 10-15 hp, although the manufacturer often recommends limiting 8 hp for comfortable operation without the risk of damage to the stern.
It's important to note the build quality. Welds are made by argon welding, which guarantees their tightness and strength. Unlike cheap ones, there are no through holes or nozzles that could become corrosion hotspots. The design is designed to minimize the number of inner corners where water or dirt can accumulate.
- 🛡️ Durable alloy: The use of aviation aluminum AMG5M provides high impact resistance and lightness.
- 📐 Optimal dimensions: The length of 3.6 meters and width of 1.4 meters create a balance between maneuverability and usable area.
- 🔩 The reinforced transan: The design of the stern allows you to install long-leg motors without the risk of deformation.
Bottom geometry also affects driving performance. Flat bottoms create high drag on planing, so Rusbot 36 It feels best in displacement mode, which means that the boat will not "jump" on the waves, but will be gently bend them, which is especially appreciated by karpat fishermen or contemplative fishing enthusiasts.
Accommodation and internal arrangements
Buying. Rusbot 36You get a basic set that you can expand as you need it, and the standard version includes beams, quilts for oars, and bows, and a nose knob is not just a storage place, but an important structural rigidity element that binds the sides.
The cockpit has spaces for the cans (seats) to be installed, usually made of moisture-resistant plywood or aluminum, and can move along the length of the boat, allowing the weight to be changed depending on the number of passengers or cargo. The can mounting system It is simple and reliable, excluding their displacement during movement.
Special attention should be paid to the system of unsinkability. In the basic configuration, built-in buoyancy units are often absent, and their role is played by sealed runduks. However, for complete safety, experienced owners recommend installing additional foam blocks under the banks or along the sides, a safety requirement that cannot be ignored.
When buying, be sure to check the equipment: the presence of oars, a pump (if there are inflatable elements) and an anchor rift. Sometimes sellers can remove these trifles to reduce the price.
The interior space of the boat is large enough to accommodate two or three people with a full set of equipment. Rusbot 36 It easily accommodates a sonar, a box with tackles and a thermos. The main thing is to distribute the weight correctly so as not to overload the stern, which could lead to the budding of the transom in water when the engine is working.
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 3600 mm | Excluding the attachments |
| maximum width | 1400 mm | By the timber bars |
| Height of board | 450 mm | In the middle part |
| Load capacity | 400 kg | Including the weight of the people and the motor |
| Boat weight | ~45-50 kg | Depends on the thickness of the sheet. |
Performance specifications in water
How he behaves. Rusbot 36 In calm water, the boat is very stable, flat bottom allows you to stand up (with caution) to throw spinning or to work with the net, maneuverability at low speeds is high, which is convenient when fishing in a trough or reeds.
When you go out on the engine, that's different. With low-power engines (2-5 hp), the boat glides confidently with only one person on board. Rusbot 36 It's not designed for speed records, it's about economical travel, trolling, or moving between fishing points, and trying to get high speed will only lead to increased fuel consumption and vibration.
⚠️ Attention: Do not attempt to go plane when the boat is fully loaded (3 people + cargo) with an engine of less than 8 hp This can lead to differentiation on the stern and dangerous speed reduction, which is fraught with flooding waves.
Management Rusbota It depends on the engine and the position of the motor, and the centering is key. If the motor is too heavy or too far from the transom, the bow of the boat will be snarled, impairing visibility and stability of the course. In windy weather, the sailing of the flat side can tear the boat down, so the anchor is mandatory.
Metal boats have traditionally been less noise-proof than PVC, and the sound of the motor and the splash of water resonate with the aluminum body, and you can use special noise-absorbing mats that stick to the inner surface of the bottom, but this will increase the overall weight of the craft.
Transport and storage
One of the main advantages of the model is its weight: about 50 kg is a mass that can be immersed on the roof of the car or in a small trailer. aluminum It's not afraid of ultraviolet light and temperature changes, which makes storage easier, and you can leave the boat outside under an awning or in an unheated garage without the risk of material layering.
When transporting on the roof of the car, it is important to use soft pads under the body to avoid scratches and dents. The boat should be securely secured using snoring belts, but not dragging them to avoid deforming the sides. Rusbot 36 It has a rather rigid design, but point loads when transported at high speeds can be dangerous.
Storage in the offseason requires minimal preparation. Just turn the boat upside down, clean the sand and silt, and leave it dry. Aluminum does not rust like steel, but oxidation is possible in places of chipped paint or deep scratches. Regular inspection and coloring of problem areas will prolong the life of the hull for decades.
- 🚗 Convenience of transport: The compact dimensions allow the boat to be transported on a category B passenger trailer.
- ☀️ Resilience to the environment: The material of the body does not burn out in the sun and does not lose its properties in the cold.
- 🧹 Easy to care for: To clean enough jet of water from the hose and brush.
If you plan to keep the boat on water during the season (at a dump or in a garage), make sure that the bottom is protected from fouling. Although aluminum grows less than wood, in standing water, algae can create additional weight and resistance. Periodic bottom washing is the best prevention.
Tuning and modernization of the model
Owners Rusbota 36 The most popular type of tuning is the installation of a console steering panel, which frees up your hands and allows you to control the engine more confidently, especially at high speeds or in windy weather, and the console also serves as a mounting place for the sonar and navigator.
The second important element of the upgrade is the installation of inflatable tubes (BB) on the sides, which makes the rigid metal boat a safer and more comfortable option, softens the shocks against the wave and protects the sides from impacts on the pier or stones. Rusbot With cylinders becomes almost unsinkable and more stable.
Should I put an electric motor on Rusbot 36?
Yes, it's a great option for quiet fishing. Electric motors are compact, fuel-free and oil-free. However, consider the weight of the batteries. For Rusbot 36, the optimal motor is 30-40 lbs and lithium battery, so as not to overload the stern.
Additional lighting is another useful upgrade: Installing LED lights on the nose and stern is mandatory for getting on the water at dusk according to GIMS rules. LEDs consume little energy and can be operated by an on-board battery of an outboard motor or a separate battery.
⚠️ Attention: When drilling holes in the case to install additional equipment (mounting downriggers, sonars), be sure to use a sealant for marine applications and zenkuy holes to avoid microcracks in aluminum.
Comparison with competitors and final conclusions
There are many analogues in the market: Crimea, Kazanka, ObWhat a good thing. Rusbot 36 Unlike the old Soviet models, it's lighter and more modern in design. Compared to PVC boats, it's better at durability and more powerful equipment, but it's less at weight and compactness when assembled.
The price Rusbot It's usually lower than the size of a boat from a brand of eminent name, which makes it attractive to novice water-powered boats, a workhorse that doesn't require greenhouse conditions, but can deliver to a cherished catch, and the reliability of welds and the quality of the metal come first.
☑️ Check before buying used Rusbot
In summary, it can be said that Rusbot 36 It's a practical boat that will last for years with minimal maintenance, and if you're looking for a sustainable, sustainable, timeless boat, it's definitely worth your attention.
Rusbot 36 is the perfect balance between price, metal strength and convenience for small bodies of water, especially for those who are not chasing high speeds.
Frequently Asked Questions (FAQ)
What is the maximum engine power for Rusbot 36?
Officially, the manufacturer recommends engines up to 10-12 hp However, experienced users often put 15 hp, which allows you to bring a boat with two passengers to plane. Exceed 15 hp is not recommended due to the risk of transom damage and loss of stability.
Do I need to register Rusbot 36 in GIMS?
Yes, if the weight of the boat with the installed engine exceeds 200 kg, or if the engine power is more than 8 kW (about 10.8 hp). Since the hull itself weighs about 50 kg, registration will be required when installing the engine capacity of more than 10 hp or if there is additional heavy equipment.
Can I make a crack in the body by myself?
Theoretically, you can, but welding an AMg5M alloy requires argon and welding skills. Normal electric welding is not suitable here, and it will only make things worse. For small holes, it is better to use special epoxy compounds for aluminum or cold welding.
Does Rusbot have 36 built-in buoyancy blocks?
In the basic configuration of full-fledged buoyancy blocks (foam) is often not, their role is played by sealed runduks. For complete safety and compliance with the requirements of unsinkability, it is recommended to independently install additional blocks of polystyrene foam or foam under the cans.