The choice of a swimmer always involves tradeoffs between comfort, load capacity and dimensions during transportation. raft-boatThe design, which has become a hit in recent years among anglers and hunters, to increase the height of the board by means of removable or folding elements, solves the eternal problem of lack of space and safety on the water, especially in conditions of high wind or wave.
Many potential buyers are looking for a purchase before making a purchase. sleeveboat reviewsSo, if you want to know if you're paying for a complex system or if you're going to pay for a classic system, you're going to have to have a nuanced experience with the versatility of these designs, and you get a spacious trophy fishing vessel, and you get a lot of build and storage features that you need to take into account in advance.
In this article, we will analyze in detail what real users say, analyze the technical specifications of popular models and find out who really needs such a boat. cock-boat It will help you avoid disappointment and make an informed choice that suits your fishing style.
What is a false board and why it is needed on a boat
The bulwark is an additional inflatable ring or section that is attached to the top of the cylinders of the main body, and when deflated, it takes up almost no space, and when inflated, it significantly increases the height of the board, creating the feeling of a full-fledged boat with rigid sides. This is not just a marketing trick, but a functional element that enhances the development of the boat. crew safety and cargo.
The main purpose of using this design is to increase the usable volume and protect against splashes. PVC With low sides, any active movement or excitement on the water leads to water getting in, and Falshbort solves this problem by allowing you to fish even in imperfect weather conditions, without fear of getting wet or losing balance.
⚠️ Attention: Installing a bulwark increases the boat's sailing speed. With strong side winds, handling can become more difficult, so it's important to properly distribute the weight of passengers and cargo.
In addition, the high side allows you to install a more powerful engine without fear of pouring a transom, which is critical for those who plan to reach high speeds or use heavy duty. electric motorsThe structure is also often equipped with additional handles and a liner cable, which facilitates landing and disembarkation from the pier or shore.
real owner reviews: pros and cons of operation
By analyzing forums and communities of water motors, there is a clear division of opinion. squawk The most common concerns are comfort, and users say that it is possible to stand in a full-length boat without fear of falling overboard, which is especially appreciated by spinning anglers and troll lovers.
But there's a downside to this, and some owners complain about the increased time they're preparing for the launch, and it takes time and effort to inflate the extra circuit, especially if you're using a foot pump. false-board It takes up more space in the trunk of the car than the standard model.
The disadvantages include the difficulty of field repairs, where if the main cylinder is damaged, the presence of additional joints and mounts of the bulwark can make it more difficult to access the puncture site. cockpit They're covering up the inconvenience.
Comparison of models: which false board is better to choose
There are many modifications on the market, and it can be difficult to choose the right one. The main difference is in the way the aboard is attached and designed. Some models have a single inflatable cylinder covering the entire perimeter, others have segmented sections that can be blown independently.
The important parameter is rigidity of the structure: more expensive models are equipped with internal struts or have reinforced fabric, which makes the side more resistant to deformation when leaning on. Cheap analogues can walk under the weight of a person, which creates discomfort. fittings and valves.
Below is a comparative table of popular specifications that should be guided when studying catalogs:
| Characterization | A solid false-board | Segmented | Hard insertive |
|---|---|---|---|
| Structure weight | Medium. | Low. | Highly |
| Assembly time | Fast. | Average | Long-term |
| Stiffness of the side | High. | Medium | Maximum |
| Compactness | Good. | Great. | Low. |
For those who change locations frequently and appreciate every minute, the best choice is a solid structure that is quickly put into operation and provides uniform rigidity throughout the perimeter. Segmented options are good for those who keep the boat in confined spaces.
The impact of the bulwark on seaworthiness and sustainability
One of the most common questions is, how does the extra cylinder affect the behavior of the boat on the water? The physics of the process is simple: by increasing the height of the board, we raise the center of gravity, but at the same time increase the volume of water displaced when rolling, this creates a "second bottom" effect, increasing stability.
However, we should not forget about the wind load. High-boat bulwark It works like a sail. It's not noticeable in calm water, but in gusty winds, the demolition can be significant, and experienced water-engines recommend that you use a radius anchor or slow down.
Impact on speed
The extra balloon increases the drag of the air, but it has little effect on the hydrodynamics, because it is above the waterline, and the speed loss will be no more than 1-2 km / h.
Importantly, the bulge allows for longer transboards, which allows for longer leg motors, which in turn improves cavitation performance and reduces noise, making the journey more comfortable.
⚠️ Warning: When installing a false board, carefully monitor the pressure in the sections. Underpumped board can collapse under water pressure, and pumped - burst in the sun.
Installation and preparation for use instructions
The process of assembling a boat with a false bort requires a certain sequence of actions. The violation of the pumping order can cause a skewed structure and make it difficult to install seats or paiola. First, the main body is always pumped, then the bulge.
It is recommended to use a pressure gauge to control pressure, because it is difficult to determine the exact values in the additional circuit by touch. High Pressurewhich require the use of special adapters or high pressure pumps.
☑️ Checklist for boat assembly
Special attention should be paid to fixing slings and belts, if they are designed, they should be stretched evenly, without distortion, this will ensure symmetry of shape and proper operation. hydrodynamic specifications when moving.
Use a soap solution to check the connection of the bulwark with the main cylinder immediately after the first assembly - this will help to identify possible micro-traumas of the tissue or leaky valves.
Care, maintenance and storage of boats with false board
The durability of your boat depends on proper care: the fabric from which the false board is made is often thinner than the main cylinder, so it is more sensitive to ultraviolet light and mechanical damage. After each fishing, you need to thoroughly wash and dry all the elements.
Keep the boat straightened or neatly rolled up, but not compressed for a long time, this will prevent the formation of crevices on the fabric of the bulwark, which over time can turn into cracks.
Regularly check the condition of the seams and places of sticking of handles. Repair of a false board is not much different from repairing the main boat, but requires accuracy due to the complex geometry. kit same brand.
Proper drying and storage at room temperature extend the service life of PVC materials of the bulwark to 10-15 years, maintaining their elasticity.
Frequently Asked Questions (FAQ)
Can you install a bulwark on a normal boat without it?
In most cases, no. The design of the boat with a false bort initially provides for the presence of special seat belts, reinforced inserts and the corresponding geometry of cylinders.
How much does the weight of a boat with a false board increase?
The weight increases slightly, usually by 2-4 kg depending on the size of the boat and the thickness of the fabric of the additional cylinder. For single transport this is noticeable, but for transport in the car the difference is not significant.
Does the bulge affect the loading capacity?
Formally, the payload is determined by the volume of water being displaced by the main body. The Falshbort does not add buoyancy if it is above the waterline, but it prevents water from scooping, which actually allows more cargo to be carried safely.
Is it difficult to repair the baldboard at home?
Repairs are similar to regular repairs PVC boatsThe same adhesives and patches are used, and the only difficulty is accessing the damage site if it is in the area of attachment to the main cylinder.
Is it worth buying a boat with a false boat for fishing in calm lakes?
Even in calm water, the high side gives a sense of security, allows you to place more equipment and protects against splashes when you actively peck or catch large fish.