Choosing a boat for serious fishing or long-distance water travel is always associated with finding a compromise between cost, comfort and reliability. aluminum-boat, which in recent years is gaining popularity among domestic water engines due to its maintainability and cross-country.
One of these models is Silverado 36S - a project designed to meet the requirements of Russian water bodies, where shallow water, snags and rocky banks are more the norm than the exception, this vessel is designed for those who are not afraid to experiment with materials for the sake of maximum efficiency. impact-resistance hull.
In this article, we will discuss in detail the design features of this model, analyze its performance and discuss the nuances of operation that the owner may encounter. bottom thickness 4 mm It is a critical parameter for survival in harsh conditions, and whether it is worth considering this project as an alternative to serial factory boats.
Shell design and materials
The basis of any boat's reliability is its body, and in the case of the model in question, the AMG5M alloy is used, which is very strong and very weldable. aluminum It is not subject to corrosion to the same extent that it significantly prolongs the service life of the product with proper care.
The hull geometry is designed to provide the best possible permeability in shallow water, and the angular contours of the Kanak and Ob boats have evolved into a more modern yet functional profile. Silverado 36S has a flat bottom with a small angle of kilvaternost in the nose, which makes it easy to jump on gelling Even with low-power engines.
It's important to note the quality of welds, which often becomes the Achilles heel of homemade products. With the right technology, argon welding in a protective gas environment, seams are stronger than the metal itself. sheet-joint for indifferences or inundations.
⚠️ Aluminum is susceptible to electrochemical corrosion when in contact with other metals in salt water. zinc protectors Do not keep the boat permanently in water without anti-fouling treatment.
To protect against mechanical damage, the nose is often reinforced with additional sheets or welded sheets. bulgeyThis allows you to dock without fear on unequipped shores or push a boat through rifts.
Technical specifications and dimensions
The size of the boat has a direct impact on its capacity and transportation requirements. Silverado 36S It belongs to the class of small pleasure-fishing vessels, which allows it to be transported on a passenger trailer without the need for special permission.
Below is a table with basic technical data that will help you match the capabilities of the boat with your needs and available. transmotor.
| Parameter | Meaning | Note |
|---|---|---|
| Maximum length | 3.60m | Including forespeak |
| Broadness on sides | 1.45 m | Parking stability |
| Height of board | 0.50 m | Splash protection |
| Load capacity | 400 kg | 3 people + equipment |
| Engine power | 15 hp. | 9.9bhp is recommended. |
As can be seen from the table, the vessel has a compact size, but at the same time offers enough cockpit area for comfortable accommodation of two or three fishermen. Load capacity 400 kilograms allows you to take with you a solid supply of fuel, gear and even a small electric motor for trolling.
The low weight of the structure is another advantage: the descent and ascent of the trailer can be carried out by one person using simple devices or a winch. solo-fisher, without any helpers.
Planning and interior equipment
Ergonomics of the interior space is what distinguishes a simple "trough" from a full-fledged space. fishing-boatIn the model. Silverado 36S The developers tried to make the most of every square centimeter of usable area.
The bow is traditionally reserved for a closed trunk (forpic), which is sealed and ensures that the boat is not sinkable in the event of a rollover. anchor-winch Or just a comfortable seat during the transition.
In the central part of the cockpit, there are hand-helds built into the sides, which are not only used to store gear, but also serve as seats, and the floor is made of corrugated sheet, which prevents slipping even in wet boots.
- 🎣 Fishing: There are places for fastening fishing rods and sonar.
- ⚓ Navigation: Possibility of installing console steering.
- 🔋 Energy: Battery compartment with ventilation.
Particular attention should be paid to the possibility of installation consoleAlthough the basic version can be supplied with rumpling control, the transom and side design allows you to easily cut into the steering column and dashboard for the installation of navigation devices.
Features of installation of the console
When installing the steering console on the Silverado 36S, it is important to correctly calculate the mounting point of the steering cable to avoid rubbing against the sharp edges of aluminum sheets. It is recommended to use a corrugated tube to protect the cable.
Driving and handling
The behavior of the boat on the water directly depends on the distribution of weights and the shape of the hull. Silverado 36S It shows a confident output to planing already at an engine power of 6-8 horsepower. This is achieved due to the lightweight body and optimal engine power. centre-up.
The boat is stiff in the wave, which is typical of flat-wheeled structures. It holds its course well, but requires steering attention when passing a transom wave. The aluminum hull extinguishes high-frequency vibration perfectly, but the shocks to a steep wave can be felt.
⚠️ Warning: Do not run at full speed on a sharp wave, which can cause nose bumps against water ("goat") and damage. cross-plate Or the engine.
The maneuverability of the vessel is assessed as high, the short length of the waterline allows you to turn almost in place, which is extremely convenient when fishing in a snag or overgrown areas of a reservoir. high-side It may require a course correction.
To improve driving performance and reduce splashing, it is recommended to install deflectors or hydrofoil on the lower unit engine on the cheekbones. This will also increase the efficiency of the screw.
Comparison with competitors and analogues
There are many offers on the aluminum boat market, from the famous Kazanoks to modern projects like Siberia or Raven. Silverado 36S?
Unlike mass-produced factory models, this boat is often made in small batches or to order, which allows you to take into account the individual wishes of the customer. Factory counterparts can sin on the economy of metal thickness or quality of painting, whereas in private production quality control is usually stricter.
In terms of price, Silverado 36S Often it is more profitable than the popular brands, offering a similar or even greater margin of safety, but it is worth considering that the liquidity of brands in the secondary market may be higher.
- 🏆 Strength: use of a thicker metal than budget counterparts.
- 💰 Price: No overpayment for brand and marketing.
- 🛠️ Repair: The possibility of self-recovery of geometry.
If you choose between a used boat of a famous brand and a new one silveradoOften the second option is a more rational investment, since you get a product with zero resource and a warranty from the manufacturer.
☑️ Pre-purchase check
Maintenance and durability
Aluminum is a very unpretentious material, but it also requires attention. Silverado 36S The problem is that it's almost impossible to kill it completely, and even if it's damaged, you can replace it or you can brew it in any garage.
The paint of the boat is usually made with polyurethane or epoxy compounds. Over time, the coating can wear out, especially in contact with the trailer or cable. Regularly painting the chips will prevent the appearance of oxides, although this is not as critical for AMH5 as for steel.
Boat care includes:
- Washing with fresh water after being in salt water.
- Lubrication of moving parts of hinges and locks.
- Checking status anodic.
- Drying internal rundooks to avoid mold.
When properly operated, the lifespan of such a vessel is decades long, aluminum does not rot, does not dry out and retains its mechanical properties at low temperatures, making the boat ideal for use in northern latitudes.
The main trump card of the Silverado 36S is a combination of an unkillable aluminum case and a simple design that can be maintained independently without the involvement of specialists.
Frequently Asked Questions (FAQ)
Can I install a 20 hp Silverado 36S engine?
Technically, it is possible to install, but it is not recommended by the manufacturer. Exceeding the recommended power of 15 hp can lead to transom overload, disruption of the centering and reduced safety of the boat, especially at full speed.
Do I need to register this boat with GIMS?
Yes, if the weight of the curbed vessel with the engine exceeds 200 kg. Given the weight of the aluminum hull is about 120-140 kg and the weight of the engine, most likely, registration will be required.
Which screw is better to choose for this boat?
For motors up to 10 hp, a 5-6 inch screw is optimal. If you plan to plane with a full load, you can consider a 7 inch pitch, but this will require a more powerful engine to work efficiently.
Is it possible to make a boat according to individual drawings?
Many of the masters who produce the model Silverado 36SWe are ready to make changes to the design: extend the cockpit, change the shape of the nose or add additional handukes at the request of the customer.