The decision to purchase an inflatable watercraft is often a turning point for the fisherman or the lover of a weekend vacation on the water. Spider 390It's a workhorse for medium-sized bodies of water. Boat 390 to buy a spiderYou’re probably looking for a balance between price, quality of materials and functionality, and this model offers an interesting trade-off.
Many beginners mistakenly believe that all boats made of polyvinyl chloride are the same, but design The 390 spider sets it apart from the competition. It's not just an inflatable boat, it's a full-fledged boat. boat For calm water, which can withstand serious loads, in this article we will discuss the technical details so that you can make an informed decision about the purchase.
Before we get into the details, it's worth noting that this model is growing in popularity because of its versatility, which is suitable for both fishing together and family walks. Dimensions The models allow you to comfortably fit with the equipment, without losing maneuverability.
Structural features and materials of the body
The basis of the durability of any boat is the material from which it is made. The Spider 390 is made of high-strength. reinforced PVCIt's resistant to ultraviolet light, fuels and mechanical damage, and it's typically 850 to 900 g/sq. m., which is the gold standard for boats of this class, which means that an accidental hit on a snag or rocky shore won't be fatal.
An important element of the design is keel-shaped Unlike flat models, the Spider 390 has a pronounced keel that provides excellent performance. course-steadinessThis is especially important when you're going against a wave or wind, and high pressure inflatable bottoms (HPD) make the boat a rigid hull that doesn't require plywood slate, which makes assembly much faster.
⚠️ Attention: When pumping cylinders and bottom, strictly monitor the pressure gauge readings. Pumping in hot weather can lead to rupture of the seams, and failure to pump - to loss of driving qualities and deformation of the geometry of the case.
The seams in the model are made by method hot-glueAnd this is a very powerful way to make sure that they're tight and tensile, and unlike cold gluing, this is actually fusing the material into a monolith, so that you don't have to layer it over time, which is a critical parameter if you're planning to operate the boat intensively.
When accepting the Spider 390, be sure to check the valves for free running and tightness - these are the most vulnerable structural elements that often suffer during transportation.
Comfort and Ergonomics: What's Inside?
Inside the cockpit, the Spider 390 is designed to meet the real needs of the water motor. free-flowSeats (banks) are usually made of moisture-resistant plywood with anti-slip coating, which allows you to feel confident even on a wet deck. lyctross-paste Or the mounts under the jar.
The system deserves special attention. slingThe perimeter of the cylinders is a port handle and safety liner, and it's not just a decorative element: holding the line while driving on the wave, the passenger insures himself against falling overboard, and there are anchoring and mooring rings on the bow and in the stern, which makes it easier to control the boat.
For fishermen, the possibility of installation is important. transom-wheel The design of the Spyder 390 transom allows you to easily mount additional equipment without breaking the tightness of the cylinders. The space under the seats is often used for storing gear or a life jacket, which saves usable space in the cockpit.
- 🎣 Convenient pockets for small things are located in the nose of the cylinders.
- 🛡️ The reinforced piercing timber protects the sides from impacts on the pier.
- ⚓ The presence of drainage valves allows you to quickly remove water from the cockpit.
- 👥 Wide seats are designed for long-term operation without discomfort.
Technical specifications and compatibility with motors
One of the most common questions when searching for a "boat spider 390 to buy" is which engine to choose. outboard With a capacity of up to 15-18 hp (depending on the modification and year of production), this allows you to reach speeds of up to 30-35 km / h, which is enough to move along reservoirs and rivers with a calm current.
The trawler of the boat is made of multi-layer moisture-resistant plywood and reinforced with linings. It can withstand the weight of the engine without deformation, but it is important to maintain balance. longlegto avoid cavitation and provide an effective propeller emphasis.
Below is a table with the main technical parameters that will help determine the choice:
| Parameter | Meaning | Comments |
|---|---|---|
| Length/width | 390 cm/160 cm | Optimal for 2-3 people |
| Load capacity | 600 kg | Including boat and motor weight |
| Boat weight (assembly) | ~45-50 kg | Depends on the configuration. |
| Pressure in cylinders | 0.25 atm | Working pressure |
| Recommended motor | 9.9 - 15 hp | For economical operation |
It is worth noting that the real loading capacity If you plan to bring a lot of equipment, sonar, tent or dogs, it is better to consider the motor a little less power, so as not to overload the transom, or, conversely, have a margin of power for planing with full load.
☑️ Pre-purchase check
Comparison with competitors and price segment
There are many analogues on the market, such as Flagman, Cayman or Hunter. Spider 390 Unlike the low-end Chinese counterparts, it uses better glue and fittings, and the assembly control at the factory is stricter, compared to premium brands, Spider offers similar functionality for less money, saving on marketing.
The manufacturer's pricing makes this model available to a wide range of consumers. When you buy a Spider, you pay first for it. materialsThis makes the boat a great choice for those who want to get a reliable tool without overpaying for the brand.
However, there are nuances: some competitors may offer a wider color range or additional options in the basic configuration (for example, a backpack bag instead of a regular one). packaging.
⚠️ Warning: Beware of counterfeits and too low prices from untested sellers. The original Spider boat can't cost three times less than the market - a sure sign of using recycled raw materials or faulty PVC.
Features of operation and maintenance
And Spider 390 After every trip to the water, especially if it was salt water or a body of abundant vegetation, the boat needs to be rinsed with fresh water, which will wash away the aggressive salts and sand that can act as abrasive when folded.
Store the product in a dry, ventilated room, away from the heater. The optimal storage temperature is room. If you leave the boat for the winter in the garage or in the country, make sure that it is completely dry. condensateremaining in the folded form, can lead to the appearance of mold, which destroys the structure of the tissue from the inside.
Check the pressure in the cylinders regularly. Seasonal temperature changes affect air volume: in winter, the pressure drops in the cold, and in summer in the sun rises. Pressure adjustment is a simple procedure that prolongs the life of the seams.
How to dry the boat properly?
For good drying, inflate the boat and leave it in the shade for a few hours. Don't use hair dryers or heaters - hot air can damage adhesive seams and deform PVC.
The bottom line: Who will fit this model?
In summary, it can be said that Spider 390 It's a rational choice for the amateur fisherman and the tourist, and it doesn't claim to be a racing car or a storm boat, but it does a perfect job for the tasks it was designed to do, and its reliability, time-tested, and affordable price make it a hit.
If you're looking for a model that can be built quickly for one person, easily transported in the trunk of a sedan, and that doesn't fail at a critical moment on the water, then the Spider 390 is your candidate. It's an investment in a comfortable stay that pays off every hour you spend on the water.
The main conclusion: Boat Spider 390 is a “golden mean” for 2-3 people, combining the strength of sea PVC and the convenience of a high-pressure inflatable floor.
Frequently Asked Questions (FAQ)
Can I install an electric motor on Spider 390?
Yes, the transom design and the overall weight of the boat allow electric motors to be installed, a great option for quiet fishing where gasoline engine noise is prohibited or slow trolling is required.
Which pump is best used for pumping?
It is recommended to use two-stage foot pumps, which come with a complete set, or high-quality electric pumps with pressure adjustment. It is important to have a pressure gauge so as not to exceed the permissible 0.25 atm.
Do I need to register a boat with GIMS?
Under current Russian law, boats weighing more than 200 kg (in running order) or with an engine of more than 8 hp (for boats up to 200 kg) are subject to registration. Since the 390 spider with an engine often exceeds these limits, clarify the current rules or prepare for registration.
Is the boat suitable for repair in the field?
Yes, it's usually a patch-and-glue remix, you can stick small punctures yourself, you can follow the instructions, and you can go to a specialized service for serious damage.