Boat. Swimmer 370 XL It's one of the most popular models among fishermen and hunters because of the optimal combination of dimensions, load capacity and price. catamaran from a Russian manufacturer "Breeze." (trademark) Swimmer) It's marketed as a one-stop solution for freshwater fishing, short sea trips, even hiking. But before you buy it, it's important to figure out whether it's right for you, whether it's best for you, whether it's from official dealers, online stores or handhelds, and what are the pitfalls behind the attractive price?

In this article we will discuss in detail specification Swimmer 370 XLCompare it to competitors (for example, Flagship 380 or Corvette 370We'll analyze the current prices for 2026, and we'll give you a checklist to check the boat before you buy it, and we'll also collect real-world feedback from owners who already operate the model in different environments, from calm lakes to sea bays.

Swimmer 370 XL: What to know before buying

Model Swimmer 370 XL class cross-country PVC boats It's a key difference from the base version. Swimmer 370 - increased length (by 20 cm) and improved stability due to the modified design of cylinders.

  • 📏 Length/width: 370 × 165 cm (in a bloated state).
  • 🔄 Number of cylinders: 3 (double-layered, with separate valves).
  • 🏋️ Load capacity: up to 600 kg (maximum - 4 people + motor + equipment).
  • 🛥️ Maximum engine power: 15 hp (recommended - 9.9 hp for optimal handling).
  • 🧵 Material: PVC 1100 g/m2 (reinforced, with protection from UV radiation).
  • 🔧 Package: oars, pump, repair kit, bag for transportation (in the basic version).

The model feature is reinforced bottom with PVC overlays of 1500 g/m2 This allows the boat to be used in shallow water with a rocky bottom without the risk of puncture. Unlike Kevlar or aluminum boats, the Swimmer 370 XL is not designed to be operated on high waves (above 2 points). This is important to consider when choosing a water area.

Among the advantages, the owners note:

  • ✅ Quick assembly (10-15 minutes with pump).
  • ✅ Resistance on the water due to wide cylinders.
  • ✅ Possibility of installation sonar or battery-system for trolling.

But there are downsides:

  • ❌ The weight of the boat (about 45 kg) can cause difficulties when carrying one person.
  • ❌ In the basic configuration is not available corn-tree (I will have to buy separately for motors over 5 hp.)
📊 Where do you plan to use the Swimmer 370 XL?
On the lake.
On the river.
By sea (coastal area)
For hunting.
For tourism

Comparison with competitors: Swimmer 370 XL vs Flagship 380 vs Corvette 370

To see if it is worth paying for Swimmer 370 XLCompare it to the two closest models from other Russian brands: all three models belong to the same price segment (120-180 thousand rubles), but have key differences.

Parameter Swimmer 370 XL Flagship 380 Corvette 370
Length × width (cm) 370 × 165 380 × 170 370 × 160
Max engine power (hp) 15 20 10
Bottom material PVC 1500 g/m2 (overlappings) PVC 1200 g/m2 + aluminum flooring PVC 1100 g/m2
Weight (kg) 45 52 40
Price (basic, rub.) 130 000–150 000 160 000–180 000 110 000–130 000

What to choose?

  • 🎣 If you need it. fishing boat with engine up to 10 hp, Swimmer 370 XL The best option in terms of price/quality ratio.
  • 🏄 For sea trips or use with a 15+ hp engine, it is better to consider Flagship 380 (more stable and durable).
  • 💰 If the budget is limited, Corvette 370 cheaper, but loses in load capacity and maximum engine power.
💡

The Swimmer 370 XL beats competitors in terms of price and functionality balance, but loses in terms of maximum engine power and weight.

Where to buy Swimmer 370 XL: official dealers, markets, boo

Prices for Swimmer 370 XL in 2026, varying from 110,000 to 180,000 rubles Depending on the configuration and place of purchase, let's look at all the options:

1. Official dealers and branded shops

Pros:

  • ✅ Warranty (usually 2-3 years for PVC material).
  • ✅ Test drive capability (at some dealers).
  • ✅ Original equipment without "surprises".

Cons:

  • ❌ The price is higher than that of resellers (10-15%).
  • ❌ Limited selection of accessories in salons.

Where to look:

  • 🌐 Official website "Breeze." ("Where to buy").
  • 🏬 Shops "Boats-PVC.ru", Flagship Trade. (Moscow, St. Petersburg, regions).

2. Online stores (Wildberries, Ozon, Yandex Market)

Pros:

  • ✅ Prices are lower by 5-10% due to competition.
  • ✅ Convenient delivery (including regions).
  • ✅ Customer reviews are right on the product page.

Cons:

  • ❌ Risk of getting a fake (check the seller’s rating!).
  • ❌ There is no way to inspect the boat before buying.
💡

When buying on marketplaces, be sure to check with the seller the series of boats (should be indicated in the passport).

3. Hand-buying (Avito, Yula, local bulletin boards)

Pros:

  • ✅ The price is lower by 20-30% (used boats 2021-2023 release are 80 000-100,000 RUB).
  • ✅ You can bargain and inspect the boat before buying.

Cons:

  • ❌ Risk of buying a boat with covert (check the joints and valves!)
  • ❌ There is no guarantee (unless it is re-issued to a new owner).
⚠️ Attention: When buying a used boat, be sure to check:
  • 🔹 Date of production (on a balloon or passport) Boats over 5 years old lose their PVC elasticity.
  • 🔹 Presence of repair patches (Even small ones can indicate serious punctures in the past.)
  • 🔹 Operational capacity of the valves (Blow them out, the air must not flow back.)

Check the boat's passport for authenticity | Check the seams for bundles | Conduct a leakproofness test (inflate and leave for 2 hours) | Check the history of operation (fresh/salt water) | Check completeness (oars, pump, bag)->

Equipment and accessories: what to buy for Swimmer 370 XL

Basic equipment Swimmer 370 XL This includes a minimum set for starting operation, but for comfortable fishing or cruising, additional accessories will be required.

1. Obligatory purchases (without them can not do)

  • 🔧 Tough transom (if you plan the engine > 5 hp) Cost: 8 000-12,000 rubles.
  • 🔋 Echo-sound battery (for example, MinKota 12V 9AhCost: RUB 3,500-5,000
  • 🛟️ Anchor folding (weighing 1.5-2 kg for rivers, 3-4 kg for the sea) Cost: 1,500-3000 rubles.

2 Optional accessories (for comfort)

  • 🪑 Folding seats with anchorages (for example, Swivel SeatCost: 4,000-6000 rubles.
  • 🧲 Waterproof magnetol (for example, Pyle PLMRKT5BCost: RUB 5,000-8,000.
  • 🔦 LED lighting for night fishingCost: 2,000-4,000 rubles.

The owners are popular homemade:

  • 🔨 Installation fishing-rod PVC pipe.
  • 🧵 Sewed chunk It's a splash protection.
  • 🔋 Installation USB sockets to charge the phone from the battery.
⚠️ Attention: When installing additional equipment (for example, sonar) watch out for boat-balancingOverloading the nose or feed impairs handling and can lead to tipping on the wave.

real owner reviews: pros and cons of Swimmer 370 XL

We have analyzed the reviews in the forums (FishHunting, Drive2, Yandex Market) and highlighted the most frequent views:

Pros (according to owners)

  • 👍 « For 2 seasons, no puncture - the material holds the blows on the driftwood.Alexey, Rybinsk)
  • 👍 « With a motor. Tohatsu 9.9 It is a plane with two passengers.”Igor, Krasnodar)
  • 👍 « It takes 10 minutes, even the wife can do it.Dmitry, Moscow)

Cons (frequent complaints)

  • 👎 « Wind demolition is strong – without an engine it is difficult to row against the wind.Sergey, Peter.)
  • 👎 « The floor pads are worn off in a season if taken ashore often.”Anton, Novosibirsk)
  • 👎 « The package comes with cheap oars - broke after a month.Oleg, Yekaterinburg)

Amongst non-obviousWhich is rarely mentioned in the reviews:

  • 🔹 Condensation inside cylinders If you do not dry the boat after use, mold may appear.
  • 🔹 Weak seat anchorages - with sharp turns on the engine, the seats are shifted.
How to deal with condensation in cylinders?

After each operation, blow the cylinders with a pump in "reverse thrust" mode (if there is such a function), or leave the boat inflated in the sun for 1-2 hours. Once a season, treat the inner surface of the cylinders. talcum (Sold in pharmacies) - it will absorb moisture.

GIMS registration: is it necessary for Swimmer 370 XL?

Since 2026, the rules for registration of small craft in Russia have been tightened. Swimmer 370 XL The following rules apply:

  • 📋 No motor: Registration is not required (the boat is considered a “melt”).
  • 🛥️ With a motor up to 10.88 hp (8 kW): Registration is mandatory, but ruleless (A boat and motor passport is sufficient).
  • 🚨 With an engine over 10.88 hp: Registration is required + management certificate (GIMS license).

Registration will require:

  1. Passport for boat and motor.
  2. Check or sales contract.
  3. Application to GIMS (can be submitted through Public services).
  4. Payment of the state duty (2 000 rubles for registration + 1,500 rubles for a room).
⚠️ Attention: If you are buying a used boat with an engine, make sure that the previous owner I took it off the books. Otherwise, you will be denied registration and will have to look for a former owner for re-registration.

Frequent questions about the Swimmer 370 XL

🔹 How many people can fit in a boat?

Officially - up to 4 people, but taking into account equipment and engine comfortably placed 2-3 peopleWhen fully loaded (600 kg), the boat lands deeper into the water, which impairs handling.

🔹 Can you use the Swimmer 370 XL at sea?

Yes, but only in coastal (no further than 1-2 km from the coast) and when you are excited no more than 2 points. kevlar-bottomed Or an aluminum boat.

🔹 Which motor is better to put on this boat?

The best option is 9.9 hp (for example, Yamaha 9.9 FMHS or Tohatsu MFS9.8Motors more powerful than 15 hp require a reinforced transom and impair handling.

🔹 How long does it take to assemble the boat?

If there's a pump, 10-15 minutesWithout a pump (manually) up to 30 minutes. Tip: first inflate the cylinders by 80%, then level the boat and bring it to working pressure.

🔹 How to keep a boat in winter?

Ideal conditions:

  • 🔹 Temperature: +5...+20 C (avoid frosts - PVC becomes brittle).
  • 🔹 Humidity: No higher than 60% (use silica gel).
  • 🔹 Position: suspended on wide straps or folded in a bag (do not fold at the seams!).

Check the pressure in the cylinders once every 2 months (should be minimal, but not zero).