Boat. Timeline 3200 NDNDM - one of the most popular models among domestic metal boats, combining strength, capacity and adaptation to Russian water bodies. OOO "Taimen" (Krasnoyarsk) It is positioned as a universal vessel for fishing, hunting and family recreation on the water. low-bottomed (NDND) provides stability even when turbulent, and the aluminum case thickness 1.5–2 mm It guarantees durability in harsh operating conditions.

However, before buying it is important to understand the nuances: is it suitable? Timeline 3200 NDNDM And what's going on with your engine, how it's going on the flow, and what kind of pitfalls are behind the attractive price tag. specificationCompare with analogues, reveal the secrets of tuning and collect honest feedback from owners - so you can make an informed decision.

We'll pay special attention. unique feature of this model: the possibility of installing a motor with a capacity of up to 25 hp without official registration with the GIMS (subject to the conditions)This makes the boat an ideal choice for those who want to avoid bureaucratic delays but are not willing to sacrifice reliability.

Technical specifications Timeline 3200 NDNDMWhat you need to know before buying

Boat length in 3.2 meters It's compact for transportation, but it's spacious enough for 2-3 people with equipment. AMG5It's resistant to corrosion and mechanical damage, and here are the key parameters.

💡

When selecting a motor for Timeline 3200 NDNDM Please note that the maximum allowed power (25 hp) is indicated for feed-trans 380 mm highFor a trans 500 mm will require registration in GIMS even with a 15 hp engine.

  • 📏 Length/width/height of the side: 3200×1500×500 mm
  • 🔧 Bottom/board thickness: 2 mm / 1.5 mm
  • 🚤 Max. engine power: 25 hp (without registration at a transom of 380 mm)
  • ⚖️ Weight of the hull: 85-90 kg (depending on the configuration)
  • 👥 Passenger capacity: up to 4 people (recommended 2–3)
  • 💧 Load capacity: 400 kg

The design feature is flat-bottomedwhich improves driving performance in shallow water, but can create discomfort in choppy conditions above 0.5 m. Orca 320 or Volgar 320) the keeliness is often 5-7°, which is better for open water but worse for coastal fishing.

In standard configuration, the boat is equipped with: transom 380 mm, seat-bank, nose-line and discharge-valveOptionally available. deepened, deck-flooring or tent.

Advantages and disadvantages: honest analysis

Like any boat, Timeline 3200 NDNDM We've collected feedback from the forum owners. FishHunting and BoatMaster) and highlighted key points.

Pros of the model:

  • 💪 Strength of the shell: 2 mm aluminum can withstand impacts on stones and drifts without deformation.
  • 🎣 Universality: Suitable for fishing on spinning, donka and trolling.
  • 🚗 Ease of transport: It is placed in the trunk of a pickup truck or on the roof of a station wagon.
  • 💰 Price/quality: from 120 000 rubles. - cheaper than imported analogues with comparable specifications.
  • 🔧 Repairability: Welded seams are available for welding, parts are easy to find.

Cons, which are often ignored:

  • ⚠️ Noise: thin sides (1.5 mm) resonate on the go, especially with a 15+ hp engine.
  • 🌊 Wave-driven management: because of the flat bottom, the boat "scours" in the side wind.
  • 🔩 Weak transom anchorages: In intensive operation, the bolts are loosened.
  • 🔥 Underbody overheating: in shallow water with heat, aluminum heats up, which is uncomfortable for the legs.
⚠️ Attention: The owners note that when installing the motor 20-25 hp On the transom 380 mm boat begins to "buried" nose at acceleration. hydrofoil or trim-plate.

Comparison with competitors: Timeline 3200 NDNDM vs Orca 320 vs Volgar 320

To see if we should pay more for the same boats, we compared the key parameters of popular boats of the same class: all models are ~3.2 m long and are positioned as “people’s” fishing vessels.

Parameter Timeline 3200 NDNDM Orca 320 Volgar 320
Body thickness, mm 2,0 1,8 2,0
Max, engine power, hp. 25 20 30
Body weight, kg 85 78 92
Kieling, ° 3 5 4
Price, rub (2026) 120 000–140 000 110 000–130 000 130 000–150 000

Timeline 3200 NDNDM win Orcas the strength of the bottom and the permissible power of the engine, but loses volgara However, the latter model requires registration in the GIMS even with a 15 hp engine due to the high transom (500 mm).

📊 Which boat brand do you prefer?
timen
Orca
Volgar
Another (write in the comments)

Tuning and improvements: how to improve Timeline 3200 NDNDM

Even the factory configuration of the boat leaves room for modernization, here are the proven improvements from experienced water engines:

Improvement of driving performance:

  • ⚡ Hydrofoil: eliminates the "buried" nose at acceleration (price ~ 8 000 rubles).
  • 🔧 Trim plate: cheaper hydrofoil (from 3 000 rubles), but less effective.
  • 🌊 Redan: homemade or factory-made (for example, from StreamLine) improves glossing.

Comfort and functionality:

  • 🪑 Seats with depreciation: Replace standard banks (example: Moeller Marine).
  • 🏕️ Tent shelter: It protects from rain and sun (from 15 000 rubles).
  • 🔋 Electrical equipment: sonar, navigator, backlight (wiring is laid in corrugated!).

Protection of the hull:

  • 🛡️ Anti-corrosion treatment: zinconate or alumol They're stitched.
  • 🔨 Kevlar underbody protection: Stickers to the most vulnerable areas.

Check the tightness of the welds

Remove measurements for hydrofoil/trim plate

Stock up with aluminum rivets (diameter 4-5 mm)

Prepare the tool: drill, rivet, sealant->

⚠️ Attention: When installing a redane or hydrofoil necessarily Check the loading boat balance! Incorrect installation can lead to tipping over at corners.

Operation and maintenance: how to extend the life of the boat

Term of service Timeline 3200 NDNDM It depends on the right care. Here are the key rules:

After each launching:

  • 💦 Washing: remove sand and silt from the bottom softbrush (not metal!)
  • 🧴 Lubricant: handle the transom and the loops silicone.
  • ☀️ Drying: Keep the boat in the shade to avoid deformation of PVC elements.

Once a season:

  • 🔍 Inspection: Check the welds for cracks (especially in the nose).
  • 🔧 Fixing of the anchorages: Transat, seats, leers.
  • 🛠️ Anti-corrosion treatment: apply alumol for scratches.

Winter storage:

  • ❄️ Temperature: Keep in an unheated room (from -5 ° to +10 °).
  • 🚫 Forbidden: Put the boat on the bottom - only on the keelblocks!
  • 🔗 Load relief: loosen the leer and the belts.
What to do if the boat gets a hole?

1. Unload passengers and cargo immediately.

2. Close the hole. repair-pack (for example, Flex Tape) or a wooden plug.

3. Bring the boat to the shore nosewayTo minimize the flow of water.

4. Make a hole on the shore aluminum-electrode (diameter 2-3 mm) or seal epoxy with reinforcement cloth.

Registration in GIMS: is it necessary for Timeline 3200 NDNDM?

One of the main questions buyers have is whether registration of the boat is required. Order of the Ministry of Emergency Situations No. 444 of 2020vessels up to 3.6 m in length and engine power up to 10.88 kW (15 hp) They are not registered if they are used in nonprofitBut for Timeline 3200 NDNDM There are nuances:

When registration is not required:

  • 🚤 Drive to. 15 hp + transom 380 mm.
  • 👥 The crew is not more than 12 people (for this boat is relevant).
  • 🚫 There is no commercial use (cruising, fishing, hunting).

When registration is mandatory:

  • ⚡ Motor. 15-25 hp. (Even if the transom is 380 mm!)
  • 📏 Tranza 500 mm (Regardless of the power of the engine).
  • 💼 Any commercial use (e.g. renting out).

💡

If you install the motor 20-25 hp on a transom 380 mm, the boat will have to register, but luxury-tax (transport tax) is not necessary to pay - it applies only to boats with a capacity of 100 hp.

Registration procedure takes 10–14 days and includes:

1. Applying to GIMS.

2. Inspector's inspection of the boat.

3. Receipt boat registration certificate and number.

Reviews of owners: real experience of operation

We analyzed more than 50 reviews from forums and social media groups (e.g., the following: VK: “Fishing on PVC and aluminum boats”Here are the typical opinions:

Positive:

"Buyed." Timeline 3200 NDNDM In 2022, in two seasons, not a single dent! Yamaha 15 hp He pulls perfectly, he goes to plane for two without problems. The only thing is that it makes a little noise, but for such money it is forgiven.
- Alexander, Krasnoyarsk

"For duck hunting, it's perfect. There's two people with a dog and a gear, and it's stable even when you're standing up, and the bottom doesn't buckle under weight."
- Dmitry, Novosibirsk

Negative:

"At a wave above 0.3 m, it starts to chatter like a traffic jam. I had to put a hydrofoil, but it didn't save me completely. It's normal for the river, and it's uncomfortable on the lake."
- Sergey, Irkutsk

«Through two seasons, the transom bolts loosened, and the seat mounts began to creak. I had to re-weld everything. Not a critical flaw, but annoying.»
— Igor, Moscow (translated from English-speaking forum)

💡

Most of the complaints are related to buildability (loose attachments, sloppy seams) But all owners say that these problems can be solved on their own in 1-2 days.

Where to buy and how much it costs: prices 2026

New boat Timeline 3200 NDNDM basicly 120,000–140,000 rublesDepending on the region and the dealer, the options increase the price:

  • 🪑 Deck flooring: +15 000 RUB.
  • 🏕️ Tent: +18 000-25 000 RUB.
  • 🔋 Electrical equipment (echo sounder + wiring): + 20 000-30,000 RUB.

Official dealers:

  • 📍 Krasnoyarsk: OOO "Taimen" (manufacturer), 60 years of October, 102.
  • 📍 Moscow: "Boats of Siberia", Domodedovoska, General Belov St., 25.
  • 📍 St. Petersburg: "FleetMarket", Engels Avenue, 134.

Secondary market:

Nana Avito and jule You can find boats of 2020-2023 release at a price 80,000-100,000 rubles.When buying a used one, be sure to check: weld-stitch, bottomless, transmutation.

⚠️ Attention: If the seller claims that the boat “does not require registration” with a 20 hp engine and a transom of 380 mm, this is the case. trickerySince 2020, the rules have been tightened and such vessels are subject to mandatory registration.

FAQ: Answers to Frequent Questions

❓ Should I paint the bottom? Timeline 3200 NDNDM?

No, the factory treatment is sufficient to protect against corrosion, but if you often operate a boat in salt water or store it outside, it is recommended to apply it every 2-3 years. epoxy (for example, International Interprotect).

❓ Which motor is better to put: 15 hp or 25 hp?

Depends on the objectives:

  • 15 hp - optimal for fishing on small rivers and lakes, boat does not require registration, fuel consumption ~ 5 liters per hour.
  • 25 hp - It's for planing with 3-4 passengers or trolling on large bodies of water, but you'll have to register a boat and put up with increased noise.

For Timeline 3200 NDNDM better balance 20 hp (for example, Honda BF20 or Mercury 20 ELPT).

❓ Can I transport a boat on the roof of a car?

Yes, but with reservations:

  • The weight of the boat (85-90 kg) requires cross-bar (for example, Thule WingBar).
  • Maximum speed. 90 km/h.
  • Secure the boat. tension-belts 200+ kg (minimum 4 anchorage points).

The alternative is trailer (for example, MIZ 7105) if you plan to travel frequently.

❓ Which echo sounder is better for this boat?

We recommend models with transducer (does not require drilling of the body):

  • Garmin Striker 4 - Budget option (~15 000 rubles).
  • Lowrance Hook Reveal 5 - with function SideScan for catching the coastline (~40 000 rubles).
  • Deeper Pro+ - portable, throws on the line (~25 000 rubles).

Use it for fastening. tranny (for example, Scotty 241).

❓ How many people can board a boat without risk?

Formally, up to 4 people (maximum load capacity 400 kg).

  • 2 people - comfortable with full equipment.
  • 3 people - possible, but the engine should be at least 15 hp
  • 4 people - only on calm water and with a motor of 20+ hp (the risk of overload!).

Remember: centre It should be closer to the middle of the boat, otherwise the nose or stern will burrow.