Choosing a swimmer for serious water travel often comes down to finding a balance between spaciousness and maneuverability. Taimene 3400This model has long proven itself as a reliable tool for rafting on rough rivers, long fishing expeditions and family vacations on the water.
The design of the vessel is radically different from traditional "bellied" boats, offering users a unique scheme with two independent cylinders. Time 3400 It combines stability that single-hull models cannot afford with high payload capacity, and owners value it for its ability to pass through shallow waters and rapids where other vessels could be damaged.
In this article, we will discuss the technical features of this catamaran, consider the real strength of PVC materials and discuss the nuances of operation in different weather conditions. Understanding the specifics of maintenance and assembly will help you to maximize the potential of this vessel.
Design features and structure of the body
The base of the vessel consists of two elongated inflatable tubes connected by a rigid frame and deck. catamaran It provides exceptional stability even in extreme excitement, and unlike traditional boats, it is almost impossible to roll over, which is critical when fishing while standing or during active activities on board.
The cylinders are made of multi-layered reinforced PVC, which is resistant to puncture and abrasion. The internal structure of the cylinders is divided into several compartments, which increases safety: if one of them is damaged, the boat will remain afloat. strap-belt and kilsons.
⚠️ Warning: Despite the high strength of the material, avoid prolonged contact of cylinders with sharp stones on the shore. Dragging a loaded boat on pebbles without special protection can lead to microcracks in the fabric.
The cylinders are connected to the deck through a system of slings and rigid inserts, which allows the boat to keep its geometry under load. The rigidity of the design allows the installation of not only hinged but also fixed transom mounts for low-power engines, although the main element of this model is rowing or the use of oars.
Welding technology
The seams on the Taimen boats are made by hot welding, which ensures the monolithic connection. Unlike glued seams, the welded joint does not dry out over time and withstands tear loads, which is especially important for a catamaran circuit where the cylinders experience constant twisting stress.
Dimension, weight and load capacity
One of the main advantages of the model is its impressive area of usable space. Length The vessel is 340 cm, and the width is about 140 cm Such dimensions allow you to comfortably place on board a crew of 3-4 people with a full set of equipment for a multi-day hike.
Load capacity Time 3400 The boat is said to be 600 kg, which means it can withstand considerable weight without critically lowering the height of the board above the water, but it is worth considering that the actual operating load must be less than the limit to maintain good driving performance.
The packed catamaran can vary in weight depending on the configuration, but averages around 45-50 kg, requiring a vehicle to transport or strong partners to carry to the water.
For clarity, compare the parameters of this model with competitors and previous versions:
| Parameter | Time 3400 | Time 2900 | Medium inflatable boat 3.4m |
|---|---|---|---|
| Length (cm) | 340 | 290 | 340 |
| Width (cm) | 140 | 125 | 160 |
| Load capacity (kg) | 600 | 450 | 500-600 |
| Type of bottom | Inflatable/rigid | Inflatable | floorboard/BDND |
| Capacity (person) | 3-4 | 2-3 | 3-4 |
Materials and build quality
In production, dense is used. PVC (polyvinyl chloride) with a density of 750 to 1100 g/sq.m. The choice of density depends on the specific modification and year of release. denser fabrics are better resist abrasion against sand and stones, but have more weight.
The furniture used in Time 3400It's usually made of stainless steel or high-strength plastic, and air supply valves must be tight at high pressure and can be easily opened even with gloves, and the quality of the valve pasting is one of the first things to check when buying.
The seams that connect the structural elements are double or triple-processed, which prevents material from being stratified at the highest tension, but like any polymer product, the boat requires careful storage, especially in winter.
⚠️ Warning: Do not keep a pumped boat in direct sunlight in hot weather. The air pressure inside the cylinders increases when heated and may exceed the permissible limits, damaging the welds.
Exploitation: fishing, rafting and tourism
The versatility of the design makes this boat popular among different groups of water engines. fisherman It's important to be able to stand up and move freely around the deck, changing gear or going from side to side, and the wide cockpit allows you to install a sonar, a gearbox and a thermos without taking up space for your feet.
In tourism and alloying Time 3400 It is valued for being able to load a lot of cargo. Sealed hatches, tents and products can be placed between cylinders and on the nose/feed, securely fixed by storm liners. Low landing reduces sailing, which makes it easier to row in the headwind.
☑️ Preparation for the first launch
But the specifics of the control are important: the catamaran has a higher lateral sailing speed and lower steering speed than keel boats, and maneuvering requires habit and coordination of crew.
When rowing on a catamaran, try to synchronize the swings of the oars with your partner. Dissynchronization leads to yawing of the boat and rapid fatigue of the rowers, since some of the energy goes to compensate for the course.
Installation of motor and attachment equipment
Although Time 3400 Often used as a rowboat, the design allows the installation of an outboard motor, for this purpose there is a transom assembly or the possibility of its installation. The power of the engine is usually limited to 5-10 hp, since the flat bottom and shape of the cylinders are not designed for sleeving with heavy load.
When installing the motor, it is important to adjust the inclination angle of the lower unit, because of the shape of the cylinders, water flow can flow to the back of the floating elements, creating additional resistance. The optimal speed for an outboard motor is 10-15 km / h.
The boat can also be fitted with a sun awning, an anchor system and rod holders, and a rigid deck allows for various navigation brackets to be mounted without the risk of damaging the inflatable elements.
Care, storage and repair
Durability Time 3400 After each operation, the boat must be thoroughly washed with fresh water, removing sand, silt and fish mucus, drying in the shade, in a straightened form, so that there is no moisture inside.
Keep the vessel dry at a temperature of not less than -10°C (although it is better to avoid negative temperatures); PVC material in the cold bluffs and becomes vulnerable to crumbs; Stow the boat carefully, trying not to get into the folds of solid objects.
If you have a puncture or cut, use the in-box strap, degrease the surface, clean it, and seal it with a special PVC patch with adhesive, and let the glue be fully polymerized before pumping.
Proper drying and storage at plus temperature is a guarantee that your boat will last 10 years or more without losing the tightness of the seams.
Frequently Asked Questions (FAQ)
Can I use the Taimen 3400 in winter for fishing?
Using PVC boats in winter is possible, but requires extreme caution: material in the cold loses elasticity and becomes brittle. Any impact on the ice or frozen object can lead to a serious crack. If you plan to go fishing in winter, be sure to use special winter kofars and avoid contact with sharp edges of ice.
What is the optimal pressure in the cylinders for this model?
The recommended operating pressure is usually 0.2-0.25 atm (about 200-250 mbar), the exact values are indicated in the product passport, pumping cylinders in hot weather is dangerous to rupture seams, and under-pumping reduces structural rigidity and driving performance.
How many people can comfortably fit on Timen 3400?
Formally, the boat is designed for 4 people, but for a comfortable fishing with a lot of equipment, a crew of 2-3 adults is considered optimal, in which case there is enough space to move and accommodate the catch.
Do I need to register this boat with GIMS?
According to the legislation of the Russian Federation, registration is subject to small vessels weighing more than 200 kg (together with the engine) or with an engine power of more than 8 kW (about 10.8 hp). Time 3400 In running order, the engines are usually less than 200 kg and are low-powered, often without registration, but the rules may change and the final decision depends on the inspector on the spot.