Choosing a swimmer for fishing or resting on the water often comes down to finding a balance between compactness in folded form and stability on the wave. Time 3600 NDNDMIt's a boat that combines proven design and cost, and many aquatic motorists see it as a middle ground between lightweight inflatable models and heavy aluminum counterparts, making it popular in different regions.
The acronym for NDND in the model name indicates the presence of a low-pressure inflatable floor, which is a key feature for comfortable operation, which allows you to stand full-length, move freely around the cockpit and install chairs or tables without risking damage to the hard flooring. inflatable floor It also acts as an additional shock absorber, softening the shocks against the wave, which is especially appreciated when transitioning at high speeds.
In this article, we will take a closer look at the technical details, performance and hidden features of this model to help you make an informed decision about your purchase. Understanding the real specifications will help you avoid disappointment and choose the right motor equipment.
Structural features and materials of the body
The basis of durability of any inflatable boat is the quality of the materials used. Time 3600 The five-layer reinforced PVC fabric is used, which is highly resistant to abrasion, exposure to fuel and ultraviolet radiation. The material density is usually 750-900 g / m2, which provides the necessary safety margin while maintaining a reasonable weight of the entire structure.
We need to focus on the seam system. Modern models are often equipped with technology. cast-sew Or reinforced slurrying, which minimizes the risk of loaded side stratification, where high voltage areas such as the lumber and the squirrel plate are reinforced by the linings, which is critical because it is the transom that takes over the main motor traction and vibration.
The low-pressure inflatable floor (LDPB) is a complex structure with internal vertical bonds (ribbons) that prevent the balloon from flattening under the weight of passengers. Inside the bottom, pressure is created comparable to the pressure in the sides, which provides a rigidity comparable to plywood peyol, but with a significantly lower weight.
⚠️ Warning: Don't pump the bottom and sides to rock in extreme heat. When heated in the sun, the air expands inside, and the excess pressure can damage the seams or the fabric itself. It's better to under-pump 10% than to pump.
The tranza plate is made of moisture-resistant plywood enclosed in a plastic casing or covered with non-slip material, which protects the tree from contact with water and mechanical damage, and the transom attachment to the cylinder is carried out through powerful slings and metal clamps that distribute the load evenly throughout the mounting area.
Dimensions, weight and capacity
Model range timen The 3600 index implies a length of the body 360 cm, which is the optimal size for transportation in the trunk of a passenger car or a nanobox. The width of the cylinders is usually about 165-170 cm, which provides good stability and allows you to accommodate two or three people comfortably.
The weight of the kit is a key consideration for those who plan to launch the boat alone, and by eliminating heavy plywood paiola in favor of an inflatable floor, the overall weight of the boat is significantly reduced, and when assembled with attachments, the weight is about 45 to 50 kg, which allows one person to carry it, although it is certainly easier and safer for both to do it.
The model's payload capacity allows up to 400 kg of payload, including passenger, motor, fuel and equipment weight. However, it's worth remembering that the maximum rated carrying capacity and the recommended for comfortable and safe operation are different things. For stable planing and good handling, it's better not to exceed 70-80% of the maximum.
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 360cm | With the balloon inflated. |
| Full width | 168 cm | Maximum width on sides |
| Cockpit length | 250 cm | Useful space |
| Cockpit width | 78 cm | Distance between cylinders |
| Boat weight | ~48 kg | In the basic configuration |
Ergonomics and interior equipment
The interior of the boat is designed to meet the needs of the fishermen. floor-floor It allows you to have rotary seats, which is not possible on hard floorboard boats, where the seats are usually attached to the sides or rest on the bottom, taking up useful space, and this turns the boat into a full-fledged mobile office for a spinning or trolling player.
The perimeter of the cockpit is a hinge bar that not only protects the board from impacts on the pier or reed, but also serves as the basis for mounting the safety lear. Lear is an important security element that can be grasped in the event of a fall overboard or a sharp roll.
There are pockets on bulkheads and special hinges for storing small items, and some modifications can be equipped with removable handukes that are attached to cylinders. D-rings. around the perimeter allows you to fix the anchor, sonar or other equipment exactly where it is convenient to use.
⚠️ Note: When installing additional equipment (echo sounders, spinning holders), avoid drilling cylinders. Use only attachments to the hinged beam or special suction cups / clamps designed for PVC.
The comfort of cruising on the bottom provides an anti-slip coating, often mimicking the texture of an EVA mat, which does not absorb water, is easy to wash, and does not allow your feet to slide even in wet shoes, which is especially true in active fishing or in rainy conditions.
Driving qualities and compatibility with motors
specifications of planing in the model Time 3600 NDNDM The optimal power range is considered to be motors from 5 to 10 horsepower. With a 5 hp engine, the boat confidently enters the plane with one passenger, developing a speed of about 20-22 km / h.
The 9.9 hp engine allows two people to be fully loaded, reaching speeds of 30-35 km/h. It is important to note that the shape of the cylinders and the rigidity of the inflatable floor contribute to a good exit to the planning mode. However, excessive power (more than 10-12 hp) can be excessive for this design and unsafe.
The boat's handling on water is rated as good for the inflatable class. The wide cockpit and proper weight distribution make it easy to turn without strong rolls. However, on high wave or side winds, the sailing of high cylinders can affect the course, requiring more active steering.
An important aspect is the height of the transom, which usually meets the standard for a long leg (L) or short leg (S). When choosing a motor, make sure that the dayweather matches the height of your boat's transom to avoid cavitation or, conversely, excessive water resistance.
Assembly, storage and transportation
The process of assembling a boat with an inflatable floor takes longer than models with a rigid pyeol, but the result is worth it. The first step is always to pump the bottom compartment to working pressure. This requires the use of a pump with a pressure gauge capable of giving pressure of 0.2-0.25 atm (sometimes up to 0.4 atm depending on the modification).
Once the bottom has become rigid, side cylinders are installed, inflated evenly, alternating the sides to avoid distortions of the structure, the final step is to install the hinged elements: seats, slab and leers, the entire process for an experienced user takes 15-20 minutes.
- 🎒 Transport: When deflated, the boat is packed into a bag that can be placed in the trunk of a sedan or hatchback, and the weight of the bag allows you to carry it to the floor without an elevator.
- 🏠 Storage: In winter, the boat should be stored in a dry room at temperatures above -15 ° C. Before packaging, be sure to dry all the elements to avoid mold.
- 🔧 Maintenance: Check the pressure in the compartments regularly before going out on the water. Once a season, it is recommended to treat the seams and valves with silicone lubrication to maintain elasticity.
It is convenient to use foot or electric pumps to pump large volumes of air, but the final pressure must be controlled by a hand-held pump with a gauge. Electric pumps often cannot deliver the desired pressure and work slowly in the final stage.
☑️ Season preparation checklist
Comparison with analogues and final conclusions
There are many competitors in the market in the segment of boats with a length of 3.6 meters with an inflatable floor. Time 3600 Often compared to models from Flagship, Aqua or Hunter, the main advantage of Taimeni is often called the balance of price and quality of the PVC used, as well as the well-thought-out geometry of the cylinders.
Unlike some budget counterparts, there is more often a reinforced protection of the bottom (a pit beam around the perimeter), which prolongs the life of the boat when operating in rocky water bodies or in shallow water.
But like any other technique, it has its own specifications, and for example, assembly time can be critical for those who are used to hard piola rolling and swimming, but if the priority is comfort on the water and the ability to stand at full height, then compromise in build time is completely justified.
⚠️ Warning: Do not keep the boat assembled and pumped for more than 2-3 days, especially in direct sunlight. Prolonged tissue tension and exposure to UV radiation accelerate the aging of the material and can lead to deformation of the seams.
In conclusion, Time 3600 NDNDM It is a reliable and versatile swimming aid for fishing, hunting and family recreation, ideal for medium and small bodies of water, as well as for the coastal areas of large rivers and lakes, and the proper operation and timely care will allow you to enjoy the water for many years to come.
What pressure should be pumped to the bottom and the side?
For the model Taimeen 3600 NDND recommended pressure in the sides is 0.25-0.3 atmosphere (250-300 mbar). Low pressure bottom (LDP) usually requires pumping up to 0.2-0.25 atmosphere, however, some models may have a reinforced bottom, requiring up to 0.4 atm. Always check the instructions on the valve or in the product passport. Insufficient pressure will lead to loss of shape and deterioration of driving performance, and excessive pressure will lead to rupture of the seams.
Is it possible to use a boat in winter?
PVC boats are possible to operate in winter, but they require caution. The material becomes stiff and less elastic at negative temperatures, which increases the risk of damage when hitting ice or sharp objects. It is not recommended to fold and lay the boat in the cold below -10 ° C. It is also necessary to avoid sudden temperature changes (introduce a frozen boat in a warm room), as the condensate can freeze inside the layers of fabric.
How to repair punctures in the field?
For urgent field repairs, it is best to use a special remake kit that comes with a boat (usually a piece of fabric and glue). If the remake is not available, you can use polyurethane glue (for example, "Crystal moment" or specialized PVC adhesives) and a patch of dense fabric. The repair site must be degreased, cleaned, glue on both surfaces, wait a specified time and press hard. Full polymerization takes up to 24 hours, but holds a patch after a few hours.