Choosing a swimming vehicle for serious fishing or family vacations on the water always involves finding a compromise between the carrying capacity, cost and dimensions in the transport position. Taimene 3800 NDNDPotential buyers often look for where it is more profitable to buy this model, not realizing that the key factor is not only the price, but also the specific modification of the bottom.
Modification with an abbreviation NDMA (Low Pressure inflatable floor) dramatically changes the performance of the vessel compared to the classic soldering variants, a solution that significantly reduces assembly time and reduces the overall weight of the kit, which is critical for those who often change fishing locations or do not have a helper on shore, but this design has its own nuances that you need to know about before placing an order.
In this article, we will take a closer look at the technical features of the model, compare it with competitors, and determine who really should overpay for the inflatable floor, and who is better to stay true to the classics. NDMA You will understand which parameters to look at first when choosing a seller.
Features of the design of the bottom of the NDND
The main difference is that it doesn't have a rigid aluminum or plywood paiole, and instead it uses a special inflatable stove of high-strength fabric with an internal structure of threads, which, when pumped, creates a rigid plane. boat Taimen 3800 maintain excellent seaworthiness while remaining surprisingly easy to transport.
Many anglers mistakenly believe that an inflatable floor is less reliable than a hard one. PVCThey can withstand tremendous tearing and abrasion, and they're designed to keep one of the compartments buoyant even when it's completely damaged, and keep the boat running.
⚠️ Attention: Despite its high strength, the inflatable floor is not intended to be dragged along rocky shores or used in shallow water with a sharp shell without a protective mat.
The important thing is the speed of getting ready for the water, and if it takes 20-30 minutes to build a classic paiola boat, it's a very simple process. Time 3800 NDNDM You can be alerted in 10 to 15 minutes, and you don't have to put in the energy to lay heavy sections of the floor and fight locks, which is especially valuable in windy weather or in poor light.
Low Pressure Technology
Inside the inflatable floor are thousands of threads connecting the upper and lower walls, and when pumped, they are pulled together, creating a rigid structure that can withstand the weight of several people and equipment without deflection.
Technical specifications and load capacity
Model range timen The 3800 is no exception, and its length is 3.8 meters and width is about 1.6 meters, providing a spacious cockpit that comfortably accommodates three adults with a full set of equipment, and the model's carrying capacity allows you to take on board up to 600-700 kg, including the weight of passengers, engine and fuel.
Use of use reinforced polyvinyl chloride The density of 850-900 g / m2 guarantees the durability of the product. The seams are made by brass method, which excludes the stratification of materials under the influence of ultraviolet light and temperature changes. The cylinders have complex geometry, which has a positive effect on the germination of the wave and course stability.
For those planning long expeditions, the volume of the internal air compartments is important. Taimeni 3800 NDNDM They're divided into independent sections, each with a lobe-type valve, which prevents air etching even if the valve group is mechanically damaged.
The optimum pressure in cylinders for maximum hardness and speed is 0.2 atm (200 mbar). Do not pump the boat in the hot sun, as the air expands and can damage the seams.
Below is a comparative table of the main modification parameters so you can better navigate the market offerings:
| Parameter | Time 3800 NDNDM | Timen 3800 (Pyol) | Competitor A (3.8 m) |
|---|---|---|---|
| Length, cm | 380 | 380 | 380 |
| Width, cm | 160 | 160 | 155 |
| Kit weight, kg | ~48 | ~58 | ~52 |
| Load capacity, kg | 650 | 700 | 600 |
| Assembly time, min | 10-15 | 25-30 | 20 |
Compatibility with outboard motors
Trans knot Taimene boats 3800 It is made of moisture-resistant plywood and reinforced with overlays. The design is designed to install outboard motors with a capacity of up to 15-18 horsepower. However, for comfortable operation with two passengers and a full load, it is recommended to consider engines in the range of 9.9-15 hp.
When choosing a motor, it is important to consider not only power, but also weight. NDMA The version is lighter than the solder version, the total weight of the kit on the trunk of the car will be less, which allows you to use a more powerful engine without the risk of overloading the vehicle. Yamaha, Tohatsu or their high-quality Chinese counterparts.
The transom is a standard 381 mm (15 inches) high, which is suitable for most gasoline and electric engines. The motor is fastened by screw clips that provide reliable fixation even at high speed and when passing a steep wave.
It is worth noting that the shape of the cylinders and the keel contributes to an efficient sleeve even with medium-power engines. taimenu confidently keep the planing mode, saving fuel and increasing the range.
Package and additional options
Buying. Taimene boat 3800 NDNDMYou get the basic kit you need to get started, but the market offers a lot of options that can make you feel comfortable, and the standard package is a bag, a pump, a remix, and a manual, but the devil, as they say, is in the details.
Special attention should be paid to the presence of a hinge beam, in high-quality modifications, it runs along the entire perimeter of the cylinder, protecting the boat from impacts on the berths and on the sides of other boats. D-ring for anchoring, safety end and additional equipment.
- 🎣 The presence of slate linings on the floor (rugs) - protects the inflatable floor from abrasion with shoes.
- ⚓ The presence of an anchor beam - the convenience of anchoring without tying the rope to the leer.
- 🛡️ Reinforced keelson - increases longitudinal rigidity and protects the bottom when impacted.
- 🎒 Two bags in the kit – separation of floorboards (if any) and the boat itself for ease of transportation.
⚠️ Note: When buying, pay attention to the date of production. Rubber valve seals and glue can lose their properties over time if stored in a warehouse incorrectly. The optimal age of the boat is up to 2 years from the date of release.
Some vendors offer tuning kits that include sonar, spinning holders and soft back seats. Time 3800 with pre-installed tuning, you are guaranteed to get high-quality glued elements, which is more reliable than self-assembly.
Where to buy and how not to make the wrong choice
The question of "where to buy" is always relevant, as the market is flooded with offers from questionable suppliers. timen It is best at official dealers of the manufacturer or in large specialized stores of boating equipment, which guarantees the presence of a factory warranty and the possibility of return in case of marriage.
Avoid buying from low-rated sellers who don't specialize in boats on general marketplaces, often selling low-quality copies using cheap glue and lower-density fabrics under the guise of the original, which are virtually impossible to distinguish visually before they are used.
When receiving the goods, make a visual inspection:
- 👀 Check the integrity of the package and no trace of autopsy.
- 💨 Pump the boat to working pressure and leave for 12 hours to check for etching.
- 📄 Make sure that the serial number on the boat matches the number in the product passport.
☑️ Pre-purchase check
The price Time 3800 NDNDM The best deals are usually seen in late autumn and winter when demand is falling. Buying in the off-season can save up to 20% of the cost by keeping the boat in a warm garage until spring.
Care and storage for long service
And timen It's been a long time in the past, and you have to follow simple rules of operation, and every time you go out, especially in salt water or in algae areas, you have to wash it with fresh water and dry it thoroughly before you pack it.
Storage should be spread out or slightly deflated at room temperature. Do not allow direct sunlight to hit the packed boat, as this creates a greenhouse effect and destroys the structure. PVC Periodically, once a season, it is recommended to pump the boat to check the elasticity of the seams.
Small punctures are easily eliminated with a standard delivery remplekt, the main thing is to degrease the surface and allow the glue to polymerize the necessary time specified in the instructions. Don't rush to seal the hole immediately, quality surface preparation is more important than speed of repair.
Compliance with storage rules and regular prevention prolong the life of the Taimen 3800 NDND boat by 1.5-2 times, maintaining its tightness and appearance.
So, Taimene 3800 NDND It's a smart choice for those who value mobility and ease of assembly without loss of size and payload, and the right choice of seller and care will make this purchase a reliable satellite on the water for years to come.
Frequently Asked Questions (FAQ)
Can I put an 18 hp engine on the Timen 3800 NDNDND?
Technically, the trans trans trans will withstand such a motor, but the manufacturer recommends limiting 15 hp for safety and optimal balance. Installation of a more powerful motor can lead to excessive differentiation on the stern and reduced handling, especially when fully loaded.
How reliable is the inflatable floor at the rocky bottom of the river?
The material of the bottom is quite strong, but inferior in resistance to punctures to hard floorboard. For frequent landings on unequipped rocky shore, it is strongly recommended to use an additional protective mat or choose places for mooring with a sandy bottom.
Will the boat fit into the trunk of the sedan?
Folded together Time 3800 NDNDM It is packed in a bag about 110x50x40 cm. In most sedans, it fits with difficulty or requires folding the rear seats. For comfortable transportation, a station wagon, crossover or roof trunk is better suited.
Which glue is best used for repair in the field?
For emergency repairs, two-part polyurethane adhesives that come in a remix are best suited, providing a seam that is elastic and water-resistant, and you can't use a regular "moment" or superglue, which will become stiff and fall off when the balloon deforms.