Boat "Tactics 390 DS": technical features, pros and cons of the model

What is the submarine "Tactics 390 DS"?

Boat. Tactical 390 DS - one of the most popular models in the line of PVC boats of the Russian manufacturer "Tactics"This model is class-class. landing-boat (hence the acronym "DS" in the name), which implies a reinforced design, increased load capacity and the ability to operate in difficult conditions, the boat is positioned as a versatile solution for fishing, hunting, tourism and even small commercial transportation.

The main difference Tactical 390 DS from standard PVC boats, these are reinforced transom assembly, allowing you to install motors with a capacity of up to 25 hp (at official registration with GIMS) The body is made of five-layer PVC material. PVC 1100 g/m2 densely 0.9 mmThis is a very powerful machine, and it's very resistant to mechanical damage. keelImproves driving performance and handling on the wave.

The boat is suitable for experienced water-engineers and beginners alike because of its balanced specifications: it is easy to transport, quickly assemble and does not require special skills for maintenance.

Technical specifications Tactical 390 DS

We'll go through the key parameters of the model that determine the capabilities and limitations of the model, and these data will help you assess whether the boat is suitable for your task.

• 📏 Length: 390 cm (3.9 m) is the optimal size for transportation on the roof of a passenger car.
• 🚤 Width: 175 cm - provides good stability, but can be cramped for three people with a load.
• 🔄 Weight: 52 kg (without motor and equipment) - allows you to carry the boat manually to two people.
• 💪 Load capacity: 600 kg is enough for 3-4 people with equipment.
• 🛠️ Maximum engine power: 25 hp (passport), but really set up to 30 hp (with the risk of problems during registration).
• 🌊 Height of the board: 50 cm - protects against splashes, but will not save from a strong wave.
• 🔹 Number of cans: 3 (two aft + one bow) - the standard layout for boats of this class.

Parameter	Meaning	Note
Case material	PVC 1100 g/m25 layers	Resistant to puncture and abrasion, but afraid of chemical solvents.
Type of bottom	Inflatable keel + flat bottom	The keel improves handling, but requires regular pumping.
Completement	Oars, pump, repair kit, bag for transportation	There are no seats in the basic version – they need to be purchased separately.
Pressure in cylinders	0.25–0.3 kg/cm2	Excess pressure leads to rupture of the seams!

Special attention deserves junctionIn. Tactical 390 DS It is made of aluminum alloy and reinforced with steel plates, which allows you to fasten engines weighing up to 60 kg. However, when installing an engine more powerful than 25 hp, there may be problems with registration in GIMS - officially the boat is certified only for this power.

Advantages and disadvantages of the model

Like any boat, Tactical 390 DS It has its strengths and weaknesses, and let's go through them in detail so you can make an informed decision.

✅ Pros:

• 💰 Price/quality: One of the most affordable boats in its class with a good configuration.
• 🛡️ Strength: Five-layer PVC withstands collisions with snags and small stones.
• 🚗 Transportability: It can easily fit in the trunk or on the roof of the car.
• 🔧 Repairability: The repair kit is included in the kit, patches are easily glued.
• 🎣 Universality: Suitable for fishing, hunting, tourism and even small business tasks.

❌ Cons:

• 🌬️ Wind dependency: Due to the high sides and light weight, the boat can be blown by the wind.
• 💺 Inconvenient seats: In the basic configuration, only inflatable cans - hard seats will have to be bought.
• 🔊 Noise: The inflatable floor does not extinguish the vibrations of the engine, which can interfere with fishing.
• 📉 Motor limit: Officially only 25 hp, although the body can withstand more.

⚠️ Attention: When operating with a motor more powerful than 25 hp, you risk a fine from GIMS for non-compliance with technical standards. In addition, the increased load on the transom unit can lead to its deformation over time.

Many owners note that after 2-3 seasons of heavy use cylinder-stitch They start to leak air. It's not a critical problem, it's enough to glue them in time with a special glue (for example, if you want to use them). Moment PVC glue or Bostik 2402However, this nuance should be taken into account when buying a used model.

Accommodation and necessary accessories

Basic equipment Tactical 390 DS It includes everything you need to start operating, but for comfortable use, you have to buy a number of accessories, let's look at what is included in the standard set and what is worth buying additionally.

📋 Standard equipment:

• 🚣 Boat with balloons and an inflatable floor.
• 🔧 Repair kit (glue, patches, solvent).
• 💨 A foot pump with a pressure gauge.
• 🪣 Two aluminum oars.
• 🎒 A bag for transportation.
• 📄 Product passport and instruction for use.

🛒 Recommended supplements:

• 🪑 Hard seats (for example, Comfort tactics or Flinc) - inflatable cans are inconvenient for long trips.
• 🔋 Electric pump (for example, Bravo BT-12) - manual swap takes 15-20 minutes.
• 🧲 Moisture-protected magnetol - for comfortable travel.
• 🔦 flashlight - mandatory for night fishing.
• 🛠️ transom wheels - makes it easier to launch.

Pay special attention anchorFor Tactical 390 DS fit folding anchor weighing 3-5 kg (for example, Grappin or cobraLight anchors (1-2 kg) will not keep the boat flowing, and too heavy (more than 5 kg) will be inconvenient to transport.

Installation of the motor and registration in GIMS

One of the key issues when buying Tactical 390 DS So we're going to look at what engines are right for this model and how to avoid registration issues.

Officially certified for motor capacity 25 hp. However, many owners install engines up to 30-40 hp, risking:

• 📝 Fine from GIMS for non-compliance with technical requirements (up to 2 000 rubles).
• 🔧 Translation damage Increased load can deform the fasteners.
• ⚠️ Reduced security The boat may become less manageable at high speeds.

If you still decide to install a motor more powerful than 25 hp, it is recommended:

1. Strengthen the transom unit with additional metal plates.
2. Use the engine with lower unit (at least 51 cm) to avoid cavitation.
3. Come through supplementary certification ICS (maybe you need to re-register the boat).

⚠️ Attention: When registering a boat with an engine of more than 10.88 hp (8 kW) in GIMS will need to provide certificate (boating license) Without this document, exploitation is prohibited!

For engines up to 25 hp, the following models are suitable:

Make of the engine	Model	Power (hp)	Notes
Yamaha	FMHS 25	25	It's reliable, but it's expensive, and it's suitable for heavy use.
Honda	BF25D	25	Economical, quiet, but sensitive to fuel quality.
Mercury	F 25 EFI	25	Good price/quality ratio, easy start.
tohatsu	MFS 25	25	Easy to maintain, but less powerful at high speeds.

When choosing a motor, pay attention to weight - it should not exceed 60 kg, otherwise the transom node may bend. hydro-lift (for example, MotorGuide) to simplify the operation of the motor in shallow water.

Tuning and modernization of the boat

Tactical 390 DS It's a great tuning platform, and even the basic model, after a little bit of refinement, becomes much more convenient and functional.

🔧 Popular developments:

• 🛋️ Hard bottom installation: Flat bottom of plywood or aluminum improves driving performance and comfort. You can order a ready-made kit (for example, from the Lodmaster) or do it yourself.
• 🎛️ Steering: Installation of the console with steering wheel (for example, Tillerman) facilitates maneuvering, especially at high speeds.
• 🔋 Electrical equipment: Connecting a 12V socket for sonar, navigator or backlighting, requires a battery with a capacity of at least 50 Ah.
• 🧲 Magnetic ladder: It makes it easier to land, you can buy it ready-made, you can make it out of sheet metal.
• 🛡️ Cylinder protection: Stickers from PVC 0.8 mm or reinforced scotch They protect against punctures when they collide with snags.

One of the most effective upgrades. stabilisationIt improves the stability of the course and reduces drift in the wind. The keel can be made independently from an aluminum profile or bought ready-made (for example, keel-m from "Lodemaster.").

How to make a keel stabilizer yourself

For the manufacture will need aluminum corner 25×25 mm and fastening clamps. keel is installed in the center of the bottom of the boat and fixed every 30-40 cm It is important not to tug the mounts, so as not to damage the PVC. After installation, check the boat on the go - the keel should not create additional resistance.

If you are planning to use a boat for fishing, it is worth installing:

• 🎣 Spinning holders (for example, Railblaza).
• 📡 echoer (for example, Garmin Striker 4).
• 🪑 The turning chair. for a comfortable fishing.

⚠️ Attention: When installing heavy equipment (such as a battery or console), watch for the equipment. centre-upOverloading the feed or nose can lead to tipping on the wave!

Maintenance and repair

Like any PVC boat, Tactical 390 DS Timely maintenance will prolong the life of the boat and prevent serious breakdowns.

🛠️ Regular maintenance:

• 🧼 Wash after each exit: Remove salt, sand and dirt with a soft brush and fresh water. Do not use detergents with abrasives!
• 🌡️ Pressure control: Check the pressure in the cylinders before each descent (optimal - 0.27 kg/cm2).
• 🔍 Inspection of stitches: Check the seams once a month with soap solution, and the bubbles indicate leakage.
• 🛢️ Valve lubrication: Once a season, apply silicone lubricant to the valves so they don't stick.

🔧 Typical breakdowns and their elimination:

Problem.	Reason.	Decision
Puncture of the balloon	Collision with sharp objects	Plug a patch from the repair kit (glue) Bostik 2402 or Uranus).
Air leakage through the seams	Natural Wear or Factory Marriage	Lay the stitches with glue Moment PVC glue Or go to the service.
Deformation of the transom	Overloading or installing an overly powerful motor	Strengthen the transom node with metal plates or replace the transom.
Loss of pressure in the keel	Damage to the valve or puncture	Check the valve for leakage or seal the puncture.

If the boat has been stored for a long time in a folded state, you need to use it before using it. straighten and dry in the sun This will help to avoid clogs of material, and it is also not recommended to keep the boat in a cold room (below +5 ° C) - PVC becomes fragile.

Owner reviews: pros and cons in real operation

To form an objective opinion on Tactical 390 DSAnd we looked at the feedback from people who already operate this boat, and we looked at the feedback from the owners on forums and social media, and we looked at the most common comments.

✅ What's praised:

• 💪 Strength: “Not a single puncture in two seasons, although I swam along the rivers with driftwood.”
• 💰 Price: I bought for 80 thousand rubles - cheaper than analogues with the same configuration.
• 🚗 Transportability: "Translating on the roof" Lady Vesta. - fits without problem.”
• 🎣 Universality: I use it for fishing and for transporting building materials to the country.

❌ What the complain is:

• 🌬️ Wind dependency: “It blows a lot in the wind, you have to constantly steer.”
• 💺 Inconvenient seats: “Inflatable cans are a pain in the back, I had to buy the hard seats.”
• 🔊 Noise: “The bottom claps loudly on the wave, it prevents fishing.”
• 📉 Sutures: After a year of operation, they began to poison the air, had to glue.

Many owners note that after installation hard-bottom and stabilizer The boat is becoming much more stable and manageable, and it's also often advised to replace the standard oars with one. collapsible (for example, Sevylor), as staffers bend quickly.

FAQ: Frequent questions about the boat Tactical 390 DS

❓ How many people can fit in a boat?

The boat is officially designed for 3-4 peopleBut with a full load (600 kg), only 3 adults are comfortable, and if you plan to take more people, consider that the load capacity will be reduced due to the weight of the engine and gear.

❓ Can I install a motor more powerful than 25 hp?

Technically, the body can withstand engines up to 30-40 hp, but officially the boat is certified only under 25 hp Installation of a more powerful engine can lead to problems with registration in GIMS and accelerated wear of the transom. If you decide on such a step, be sure to strengthen the transom assembly.

❓ How often do I need to pump the cylinders?

When used regularly, check the pressure before every Even a small leak can lead to loss of controllability, on average, a pump is required every 1-2 weeks (depending on the tightness of the seams).

❓ Which motors are best suited for this boat?

The best options are: Yamaha 25, Honda BF25 or Mercury F25These engines are reliable, economical and well balanced in weight. If you have a budget, you can look at Chinese engines. Parsun T25), but they are less durable.

❓ How to keep a boat in winter?

I need a boat. wash out Keep it dry at temperatures above 5°C, away from the heater, spread the boat for 1-2 hours once a month to avoid deformation of the material, the case must be breathable so that condensation does not accumulate.