Choosing a reliable fishing boat or a family holiday on the water always involves finding a balance between price, quality and functionality. 390P tacticsThe boat, which has become one of the most talked-about domestic water engines in recent years, represents a compromise between the dimensions that allow three adults to comfortably accommodate and the maneuverability that is available to drive low-power engines.
Unlike its larger counterparts, this modification is designed to meet the requirements for transportability and ease of assembly, which makes it popular among fishermen who often change water bodies. Inflatable structure High Pressure inflatable floor (HPD) provides excellent wave germination and stiffness comparable to a rigid body. In this review, we will take a detailed look at all aspects of operation, technical nuances and hidden features that are rarely reported in advertising booklets.
It is worth noting that the abbreviation "P" in the name often indicates a specific configuration or reinforced series, which implies the use of denser materials and reinforced seams. Tightness The boat is designed for active use in the conditions of Russian rivers and lakes, and understanding the real capabilities of the vessel will help to avoid mistakes when choosing the engine and equipment.
Design features and materials
The basis of durability of any inflatable boat lies in the materials from which it is made. 390P tactics The five-layer reinforced PVC is used, which is highly resistant to abrasion, gasoline, oils and ultraviolet radiation, and the material density is usually between 850 and 1100 g/m2, which is the gold standard for boats of this class. Stitches made by hot gluing technology (Hypalon), which excludes their divergence even under extreme bending loads.
The engineers focused on the design of the bottom, and the AirDeck inflatable floor allows for minimal engine plane, which is comparable to plywood but much lighter. A key feature of the model is the system of strengthening the bottom with additional overlays of spray-protective material, which is critically important when driving in shallow water or rocky areas. This solution significantly extends the service life of the product without increasing its weight in assembled form.
⚠️ Attention: When pumping the bottom of the NDND, strictly monitor the pressure gauge. Pumping in hot weather can lead to rupture of internal partitions, and failure to pump - to loss of driving qualities and deformation of the body.
The boats are separated into independent compartments, which ensures buoyancy even if one of the cylinders is damaged. The bow has an inflatable pendant, which gives the hull excellent keeliness. wave-sliceIt's not just slapping on it, which makes swimming more comfortable and safe, and all the valves are equipped with sand and mud protection, which is especially true when used on sandy beaches.
Technical specifications and load capacity
The overall performance of the model directly affects its behavior on the water and capacity. 390P tactics It is 3.90 meters long and about 1.90-2.00 meters wide (depending on the year of manufacture and modification), and this size allows you to feel confident in a wave height of 0.5-0.7 meters, which is quite impressive for inflatable boats.
The vessel has a carrying capacity of 600-700 kg, which formally allows for 4-5 people on board, but for comfortable fishing or a walk with a full set of equipment, a crew of 2-3 people is considered optimal. Engine power It can vary from 5 to 15 hp, but the most optimal mode of operation is the use of a motor with a capacity of 9.9-10 hp with a short leg.
The weight of the boat in full configuration (with plywood cans, but without motor and attachments) usually does not exceed 65-70 kg. This allows it to be transported in the trunk of most wagons or crossovers, especially if you use folding plywood cans or inflatable seats.
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 390 cm | With the inflated nose balloon |
| Full width | 190-200 cm | Depends on the pressure in the cylinders |
| Load capacity | 650 kg | Recommended load of 450 kg |
| Engine power | 15 hp. | Optimum 9.9bhp. |
| Weight of kit | ~68 kg | Excluding fuel and oil |
It is important to understand that these specifications are true when observing the recommended pressure in cylinders (usually 0.2 atm). As pressure decreases, the rigidity of the housing decreases, which leads to an increase in water resistance and, as a result, to an increase in fuel consumption and a decrease in maximum speed.
Package and ergonomics of the cockpit
The interior of the boat 390P tactics The slab of moisture-resistant plywood, which is lined with PVC reinforced, can securely hold the outboard motor, and is mounted with special brackets that prevent the motor from shifting even when it is subjected to sudden maneuvers or shocks to the wave.
The seats (banks) in the basic configuration are most often plywood plates covered with (anti-slip) coating, they are installed in special pockets-liktros, which allows you to adjust their position along the side, which allows you to shift the center of gravity forward or backward depending on the load of the boat and the navigation conditions.
- 🎣 The rod-holdersSome versions provide pockets or mounts to install spinning holders, freeing the angler's hands.
- 🛡️ Protective liningsThe boards are equipped with a bolt around the perimeter, which protects the boat from impacts on the pier, stones or the sides of other boats.
- 🚰 Water-flowingIn the aft part there is a bottom valve for quick removal of water that has got inside without the need to tilt the boat.
Special attention should be paid to the attachment system, which has liner rings on cylinders, to which you can fasten the safety end, anchor flap or bag for things. transom wheelsIf they are included in the kit or bought separately, they are attached directly to the transom, without taking up useful space inside the cockpit.
⚠️ Attention: It is not recommended to drill additional holes in the transom or cylinders for the installation of sonars and sensors without consulting a specialist.
The ergonomics of the cockpit also include handy perimeter handles, which are made of durable material and are sewn with a double seam, allowing you to easily drag the boat along the shore even in full gear. The bow often has a special loop to attach the anchor tack, allowing you to use the anchor cat or cargo without the risk of entanglement.
Driving and handling
On the water. 390P tactics It's predictable and stable. It's got a keel bottom, and it's got a great course, even in lateral winds or excitement, and it's got a 9.9 hp single-passenger plane, and it comes out almost instantly, in 2-3 seconds, and it's especially appreciated when you're trolling or if you need to quickly change your catch point.
High speed handling is very robust, the boat is not prone to yaws and responds well to the cornering of the rummel, but it is worth remembering that when fully loaded (3 people plus equipment), going to plane may require more sharp gas operation or redistribution of cargo closer to the transom.
The secret to fuel economy
To reduce fuel consumption at cruising speed, try to slightly raise the bow of the boat, moving the load closer to the stern, but not overloading the transom.
Softness is another of the best features of this model, which is that inflatable tubes act as shock absorbers, extinguishing the shocks against a small wave, which reduces the fatigue of passengers and allows them to spend several hours on the water without discomfort in the back. Speed. With a 9.9 hp engine, it is about 25–30 km / h with one driver, which is quite enough for most tasks.
When moving against the wind, the boat demonstrates good sailing, characteristic of all inflatable boats. To compensate for the demolition, it is recommended to use an anchor tile or correctly position the hull relative to the wave. In calm, handling becomes almost perfect, allowing you to perform accurate maneuvers when fishing in a trunk or reed.
Assembly, maintenance and storage
The process of preparing the boat for launch takes an average of 15-20 minutes with an electric or gasoline pump. Manual pumping is also possible, but it will require more time and physical effort. It is important to follow the sequence: first pump the cylinders, then the keelson, and lastly the bottom of the NDNDM.
☑️ Season preparation checklist
Boat care 390P tactics After each operation, you need to wash salt, sand and silt with fresh water. Particular attention should be paid to valves - sand trapped in the mechanism can violate the tightness. It is recommended to treat PVC material with special protective compounds that restore elasticity and protect against UV rays.
Keep the boat in a dry, cool room, away from heating appliances and direct sunlight, when folded, it takes up a minimum of space, which allows you to keep it even in the apartment. Temperature conditions Storage should not fall below -30°C and rise above +50°C, although short-term deviations are permissible.
⚠️ Warning: Never leave a pumped boat in direct sunlight for long periods of time unattended, heating the air inside the cylinders will lead to a critical increase in pressure and can damage the seams.
Regular inspection of the joints and places of sticking of handles will help to identify potential problems at an early stage. If you notice the detachment of the material or the appearance of bubbles, it is better to immediately contact the service center or use a special remake for PVC. Small punctures are easily eliminated in the field with glue and patch.
Comparison with competitors and final conclusions
In its price segment 390P tactics It competes with models such as Flagship 380, Aqua 390 and Cayman 380The main advantage of Tactics is often called thicker material and reinforced bottom design, which gives a gain in reliability, but the weight of the boat can be slightly higher than that of competitors using lighter fabrics.
In terms of driving performance, it is almost not inferior to the market leaders, and in terms of comfort of accommodation of three people, it even surpasses many analogues due to the competently designed geometry of cylinders. Price. The product fully corresponds to the offered quality, making the purchase economically justified.
When buying a used boat, be sure to check the release date indicated on the nameplate or in the passport. PVC materials are limited in life, and a boat that has been in the garage for 10 years may require serious restoration of seams.
When you choose between different modifications, you should be more specific to your needs. If you want to be as light as possible, look at the simplified versions. If safety and durability are the priority, the P-increased option is the best choice. Either way, it's an investment in a comfortable water holiday.
In summary, it can be said that 390P tactics It's a balanced solution for a wide range of applications, suitable for avid anglers and family walkers alike, and its robust materials and sophisticated design make it one of the top sellers in its class.
The 390P is the best choice for those looking for the reliability of a reinforced design and are willing to put up with a little more weight for safety and durability.
Frequently Asked Questions (FAQ)
Can I install a 15 hp Tactical 390P engine on the boat?
Technically, a 15 hp engine is possible because the transom can withstand such a load. However, the passport recommendation most often limits the power of 10-12 hp to ensure safety and optimal driving performance. Exceeding the recommended power can lead to excessive stern differentiation and reduced handling, especially with low load.
What type of pump is best used to pump the bottom of the NDNDM?
For pumping the bottom of high pressure (up to 1 atm and above), conventional foot or cheap electric pumps will not work - they will not create the necessary pressure. It is recommended to use specialized two-stage electric pumps with a high pressure mode or high-quality foot pumps with a pressure gauge designed for PVC boats.
Should I lower the boat overnight if it is on the water?
It is not recommended to leave a fully pumped boat on the water overnight, especially in hot weather or at risk of a storm. Temperature changes can cause pumping of cylinders, and current or wind can damage the sides on the pier. It is better to lower pressure to 0.1 atm or pull the boat ashore.
What is the difference between the 390P and the regular 390?
The P index usually denotes a reinforced version (Reinforced), which may consist in the use of denser PVC (for example, 1100 g / m2 versus 850 g / m2), the presence of additional protective tapes on the bottom, reinforced overlays in friction areas and more powerful transom plates.