Choosing a reliable fishing or hunting watershoot in the Russian north and Siberia often comes down to finding a balance between the strength of the metal and the ease of transportation. Tactical 460 DSThis is not just another modification of the classic Kazanka, but the result of many years of experience in operating in extreme conditions of the Ob reservoir and rivers of Siberia.
The body is made of D16T duraluminium alloy, which provides high impact resistance and the ability to withstand contact with rocky bottom or ice. Unlike light alloys, this material is less prone to plastic deformation when impacted, which is critical for fans of running fishing in hard-to-reach places. However, despite its apparent simplicity, the case has a number of nuances that must be considered when buying.
Model DS The name indicates the presence of a bottom cheekbones, which significantly improves the driving performance on the wave compared to flat-bottom counterparts, which makes you feel comfortable even in moderate winds and a little excitement, when ordinary Kazan women begin to prowl dangerously, but it is worth remembering that improving seaworthiness inevitably entails a change in weighting and engine power requirements.
Design features of the body and geometry of the bottom
The basis of the boat is an all-welded hull, where all the seams are argono-arc welding, which eliminates the risk of leakage at the joints of the skin and the frames, which is often the Achilles heel of riveted structures. The bottom is V-shaped with a pronounced cheekbone that goes on board. Tactical 460 DS confidently cut the wave, reducing the impact load on the body and passengers.
⚠️ Warning: When operating in shallow water, remember that the sculpted body has less ground clearance in the center than flat-bottomed models. Be careful when going ashore with a gentle slope, so as not to damage the keel.
The boats are reinforced with a bolt, which not only protects the upper edge, but also serves as the basis for attaching the safety leer. The bow has a knob that closes with a lid, which allows you to store things that should remain dry. In the aft there is a tray board, reinforced with linings for the installation of the outboard motor.
An important element is the availability kielson And they're also longitudinal redans, which not only reinforce the bottom structure, but also stabilize the boat in the planing, preventing yaw. This is especially true for a 4.6-meter model, because the hull can be very sailable in lateral winds.
Welding technology
All seams of the boat Tactic 460 DS are made using argon-arc welding in an inert gas environment. This ensures the depth of the boil and the absence of oxides, which makes the seam stronger than the base metal and eliminates corrosion at the joint sites.
Technical specifications and load capacity
The dimensions of the boat allow it to be transported on the roof of a passenger car or on a trailer, but the weight in running order requires attention. rated carrying capacity is 500 kg, which allows you to accommodate 3-4 people and the necessary equipment.
The length of the hull is 4600 mm, the width on the midfield is 1550 mm, and the height of the side is 450 mm. Such dimensions provide sufficient internal volume, but when fully loaded, the buoyancy reserve decreases. The maximum power of the recommended engine for this model is 30 hp.This allows speeds of up to 40-45 km/h depending on the load.
The weight of the boat itself, without motor and equipment, is about 140-150 kg. This is quite a lot for one person, so it is recommended to use a winch or partner's help to launch and load the trailer. The D16T aluminum alloy, while durable, is not lightweight compared to modern composites or magnesium-aluminum alloys.
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 4600 mm | Including forespeak |
| maximum width | 1550 mm | Midel-spangout. |
| Height of board | 450 mm | Including the timber |
| Load capacity | 500 kg | Considering the weight of the crew |
| Engine power | 30 hp. | Recommended 15-25 hp |
Accommodation and internal arrangements
Basic equipment of the boat Tactical 460 DS It's usually minimal, and it includes the body itself, removable cans (seats) and rundooks, but many owners immediately think about retrofitting to improve comfort. Standard cans are made of coated plywood, but their location may not always be convenient for trolling-style fishing or spinning off the board.
The bow is often fitted with a soft seat on a runduk, which serves as a sleeping place in the camping environment, the aft part is adapted for the installation of the engine, but the regular elbows can interfere with free movement, so tuning often begins with the transfer of the tiller or the installation of remote control.
There are special seats for fixing gear and gear, but they may not be enough. Many anglers independently mount additional shelves, rod holders and battery drawers, while it is important not to disturb the centering of the boat, so as not to change its differentiation.
Motor installation and driving performance
Selection of engine Tactical 460 DS It's a trade-off between speed, fuel consumption and safety, and with a 15-20 hp engine, the boat goes into plane with two passengers, but when fully loaded, it can "fall" into transition mode, and many experts consider 25-30 hp engines the best choice.
When installing the motor, you must strictly follow the manufacturer's recommendations for the height of the transom. Clamping the motor too high will lead to cavitation and loss of traction, and too low landing will increase the water resistance and the risk of flooding the water into the cockpit. The screw should be selected depending on the typical load: for fishing with a full load, you need a screw with a smaller pitch.
The quiet water is very good, the boat is flat, it doesn't scour, but in the wave, the hull can create a stiff sway if you go against the wave at high speed, and you have to drop the gas and go in displacement mode or at an angle to the wave.
⚠️ Warning: Never exceed the recommended engine power. Installing a motor more powerful than 30 hp can lead to the collapse of the transom and the boat tipping over due to loss of stability at high speeds.
Tuning and refinement for fishing
Owning a metal boat is not without the desire to improve its performance. Tactical 460 DS This solution (often called a body kit) solves several problems: it increases stability, increases load capacity, and protects the sides from impact.
Another important element of the upgrade is the installation of windshields (front windows). At high speeds, the oncoming air flow is very tiring for the driver, and the spray can splash the cockpit. The glass is installed on a frame fixed to the shaft bar or sides.
Owners also often change their floor coverings to a warmer, more non-slip floor covering, aluminium cools down quickly in cold water, and it's uncomfortable to stand on it for hours, and using corrugated aluminum or special EVA mats greatly improves comfort.
☑️ Boat tuning plan
Care, maintenance and storage
Duraluminum is a reliable material, but it requires proper maintenance. The main enemy is electrochemical corrosion, which can occur when in contact with other metals in salt water or in the presence of vagus currents. So it is important to monitor the state of the anodic protection, if installed, and not to keep the boat with a submerged screw unnecessarily.
After each operation, especially in salt water, the body must be rinsed with fresh water, which will wash away salt and dirt, which can aggressively affect welds and painted surfaces, and regular inspection for chipped paint and scratches will prevent the spread of oxidation in time.
When stored in winter, it is better to keep the boat inverted or on special slipways to prevent deformation of the hull under its own weight and snow load. If the boat is stored outside, ventilation inside the hull should be provided to avoid condensation.
Use special aluminum polishes with wax or Teflon content, which will create a protective film that repels water and dirt, and make it easier to wash the boat after the season.
Timely processing of chipped paint and regular washing is the guarantee that the boat will last several decades without losing the strength of the hull.
Frequently Asked Questions (FAQ)
Is it possible to use the 460 DS Tactics boat to sail?
The boat is designed for use on inland water bodies such as rivers, lakes and reservoirs, and can only be accessed in the sea in calm weather and in close proximity to the shore, and is not designed for sea wave and salt water without serious anti-corrosion training.
Which screw is better to choose for the engine 20 hp?
For a 20 hp engine and loading 2-3 people with a load, the best propeller with a pitch of about 9-10 inches will be optimal. The exact selection depends on the type of motor (Yamaha, Mercury, Tohatsu) and the desired full-gas revolutions. The goal is to reach maximum revs (tachometer) at full load.
Do I need to paint the bottom of the boat?
Factory oxidation and painting are usually quite reliable, but if you plan to pull the boat out to pebble beaches often, additional epoxy paint or keel protection will prolong the life of the hull.
Will the boat fit in the trunk of the station wagon?
No, the length of 4.6 meters will not allow you to place the boat in the trunk of even the largest station wagon or minivan without serious disassembly of the cabin and the risk of damage.