Choosing a reliable and maneuverable swimming aid for fishing or resting on the water often leads active leisure enthusiasts to consider inflatable structures. Three Sharks 260The boat is popular for its compactness and time-tested design, and is ideal for solo walks in calm waters or for fishing with little gear.
The main feature of this model is the use of high-quality reinforced PVC, which provides durability and resistance to punctures. The cylinders are designed to provide maximum stability even when the center of gravity is shifted, and many fishermen choose this option for its ease of transport and rapid assembly in the field.
In this article, we will discuss the technical nuances in detail, we will consider realism And we'll give you practical operational advice. cylinder diameter 36 cm This is the best way to prepare the boat for the first season.
Design features and materials
The basis of reliability of any inflatable boat is the material from which its cylinders are made. Three Sharks 260 It uses five-layer reinforced PVC, which is not only tensile, but also resistant to ultraviolet rays and combustibles and lubricants. The density of the fabric allows you to withstand significant loads, maintaining elasticity even at low temperatures.
The bottom of the boat is most often made in the form of a high-pressure inflatable floor (HPD) or hard plywood paiola. NDMA It provides excellent hydrodynamics and allows for higher speeds, as the bottom takes the shape of a keel. The hard floor, in turn, gives the feeling of a stable platform, which is critical for fishing in a standing position.
⚠️ Warning: When operating a boat with a hard floorboard bottom, be sure to check the condition of the locks and washers after each season.
An important element of the design is the presence of keel-bagIt's a system that runs along the entire length of the bottom, and it not only improves the stability of the course, but also acts as a protection against impacts on the bottom when you go ashore, and the quality of gluing the seams in this area determines the overall service life of the product.
Stitching technology
The Three Sharks 260 uses a two-component polyurethane adhesive that polymerizes when heated, providing a monolithic compound that is virtually impossible to break mechanically without damaging the PVC material itself.
Technical specifications and load capacity
The overall performance of the model 260 makes it one of the most compact in its class. the total length is 260 cm, and the width of the cylinders is 125 cm. Such dimensions allow you to comfortably accommodate in a boat one adult with a full set of equipment or two passengers with a minimum cargo reserve.
The displacement and load capacity are directly dependent on cylinder volume and bottom design, and for this model, the declared load capacity is usually around 220-250 kg, which includes the weight of passengers, motor and equipment. recommended load It should not exceed 150-160 kg.
| Parameter | Meaning | Unit of measurement |
|---|---|---|
| Total length | 260 | centimeter |
| Breadth of cylinders | 125 | centimeter |
| Diameter of the cylinder | 36 | centimeter |
| Load capacity (max) | 250 | kilogram |
| Boat weight (with paioles) | 32-35 | kilogram |
It is important to consider that the weight of the boat itself in a assemblage with a plywood bottom can reach 35 kg, which requires a vehicle to deliver to the water. NDMA It allows you to reduce the weight of the kit to 25-28 kg, which greatly facilitates the carrying alone.
Package and additional options
Standard equipment of the boat Three Sharks 260 This usually includes everything you need to start operating, including transmesse-stick cylinders, an inflatable quiff device (if applicable), a carrying bag and a remix. kit It is a mandatory requirement for registration with GIMS.
Among the additional options that can be installed at the request of the owner, it is worth highlighting the reinforced handles for carrying and the liner cable around the perimeter. The liner cable not only facilitates mooring, but also serves as insurance for passengers in the event of a boat flip, and also popular spinning holders and anchor dice.
- 🎣 A reinforced transneur - allows you to install motors with a capacity of up to 5-6 hp without the risk of deformation.
- 🛡️ Smack-offers - special linings on the nose, protecting against splashing.
- 🔦 Retro-reflective elements Increase the visibility of the boat on the water at dusk time.
When buying a used model or ordering from the factory, be sure to check the availability of product passportWithout this document, the inspection would not be possible, and the manufacturer's warranty would not work, and the documentation must contain the serial number corresponding to the number on the cylinder.
When buying a boat, pay attention to air supply valves. Quality brass or aluminum valves with sand protection last for years, while plastic analogues can poison the air after the active season.
Choice of outboard motor
The powertrain of a boat with a length of 2.6 meters requires a balance between power and weight. The optimal choice for this model is two-stroke or four-stroke engines with a capacity of 2 to 5 horsepower. More powerful engines can bring the boat to plane, but this will require perfect weight distribution.
Two-stroke engines are preferred because of their light weight and the ability to transport in any position. For the 260, the weight of the engine should not exceed 20-22 kg, otherwise the bow of the boat will be picky and the boat will be snared. sink-board Four-strokes are heavier, but quieter and more economical, which is important for trolling.
⚠️ Attention: Installing a motor above 6 hp on the Three Sharks 260 boat can lead to loss of cornering stability and transom deformation.
When you attach the motor, use a safety cable that runs through the transom dice, which will prevent engine loss if the rods weaken or hit an obstacle. Regularly check the tightening of the screws. cross-plate To the cylinders.
☑️ Check before installing the engine
Operation and care of PVC
Durability of the boat Three Sharks 260 After each launch, the cylinders must be washed with fresh water, especially if they were operated in salt water or contaminated water bodies, and when they dry on the surface, dirt and silt can damage the PVC protective layer.
Store the product should be inflated or in a freely folded form, but not in a tightly compressed convolution for a long time. The optimal storage temperature is from -20 to + 40 degrees Celsius. Before long storage (winter), it is recommended to treat the material with special special treatments. PVC preservativewhich prevents drying and cracking.
If you notice minor damage or cut, don't delay repairs. Using a quality glue and patch of the same material will restore tightness. It's important to degrease the surface before gluing and maintain the temperature regime specified in the glue instructions.
Proper drying and storage of the boat in the straightened form prolongs the service life of the seams and prevents the appearance of microcracks on the folds of the material.
Frequently Asked Questions (FAQ)
Can I use the Three Sharks 260 to go out to sea?
Use in the open sea is only possible in calm weather and in close proximity to the shore. The design is not designed for a large wave, and the risk of being thrown overboard or overturned is high. For the sea, it is better to choose models with large cylinders and spray protection.
Which glue is best for PVC repair?
For repairing PVC boats, two-component polyurethane adhesives (such as Texacoll or specialized adhesives for boats) are best used, providing an elastic and water-resistant seam. Cyanacrylate-based adhesives (“superglue”) are not suitable, as they are rigid and break down by bending.
Do I need to register the boat Three Sharks 260 in GIMS?
Under current Russian law, small craft weighing more than 200 kg (along with an engine) are subject to registration, since the weight of a light-powered 260 boat is usually less than 200 kg, registration is often not required, but the rules may change and the inspector makes the final decision during the survey.
How long does a PVC boat last for active operation?
With care, proper storage and timely repair of minor damage, the service life of a quality PVC reinforced boat is 10-15 years.