Choosing a reliable swimmer for fishing or family water vacations often comes down to finding a balance between price, quality and functionality. Triple 390 For several years, it has been one of the most discussed in the budget and mid-market segments of the inflatable boat market, and potential buyers are interested in how much expectations are justified and whether the actual operation corresponds to the specifications declared by the manufacturer.
Analyzing multiple user reports gives an objective picture, and many say that this model has become popular due to its availability and the ability to install a full-fledged system. outboardBut like any technology, it has its own nuances of build, operation and durability that you should know about before you make a purchase. In this article, we will examine the real-world experience of ownership, the hidden disadvantages and the non-obvious advantages.
It should be noted immediately that Triple 390 It is positioned as a universal boat for trolling, spinning and small wave exits. inflatable floor High pressure (HDP) provides comfort comparable to a rigid body, but still retains mobility, and owners often argue about how well it holds the wave and how it behaves on planing with different motors.
Overall impression and quality of materials
The first thing that you notice when you look at a boat is the density of the material you're using, and you're using five layers of reinforced fabric. PVCIt's a very hard, hard, hard material, and users often say in their reviews that it doesn't have a strong chemical smell, which is a proxy for its quality and lack of cheap impurities.
The seams are made by hot welding, which is the standard for reliable products, but on detailed inspection, some owners found small flaws, such as the uneven width of the flyover or small air bubbles under the valves. Triple 390 In general, it is collected neatly, but the human factor in production sometimes makes itself felt, so visual control during acceptance is mandatory.
⚠️ Warning: When you first inflate the boat, leave it in the sun for 15-20 minutes, which will allow the material to warm up, and the seams will sit correctly, which will eliminate the appearance of microcracks during further operation under load.
The accessories, including the handles and the liner rings, are made of plastic with a metal base. The reviews vary: some praise them for their ease, and some complain that the plastic linings of the handles are on the handles. transceive It is recommended to be careful when carrying, especially if the boat has a heavy motor or battery.
Driving qualities and behavior on the water
A key parameter for many fishermen is the behavior of the boat on the wave, with a length of 3.90 meters and a wide balloon system. Triple 390 It's a medium wave behavior. NDMA (low pressure inflatable floor) or NDND (high pressure, depending on the modification) works as a shock absorber, extinguishing blows to water.
However, it should be borne in mind that this is not a glider in the full sense of the word when installing low-power engines. To enter the planing with two passengers and cargo, you need a motor of 5 hp and above. With a 9.9 hp engine, the boat accelerates to 25-28 km / h, which is an excellent indicator for this class.
High speed handling depends on proper weighting, and if you move passengers and cargo too close to the bow or stern, the boat will start to scour or, conversely, burrow its nose. Kieliness The bottom helps to keep the course, but with a side wind, the sailing of the cylinders requires active work with oars or adjusting the course with the engine.
Noise is an important aspect. inflatable tubes are great at quenching the vibration of the motor, making the swim quieter than on aluminum analogues. But when hit by a high wave, you can have a characteristic slap on the bottom of the water, which some users liken to cotton, which can frighten fish when fishing in silence.
Package: What is in the box and what is missing
Standard equipment Triple 390 It usually includes the boat itself, the supercharger, the remix, the seats (banks) and the bag-package. The seats are made of plywood, moisture-resistant cloth, and are attached to lyctross. They are comfortable enough for short transitions, but for hours of fishing owners often recommend to buy soft overhead pillows.
The paddles are often included, but the quality is poor. Aluminum paddles with plastic blades are only suitable as an emergency option or for maneuvering off the coast, and it is difficult to row them against the wind or current due to the small entrapment and large backlash in the joints.
- 🎣 transom wheels - often go as an option, but their availability is critical for single operation, as the boat assembled with the engine weighs a lot.
- 🎣 Anchor rum - installed in the nose, made of metal, but sometimes requires additional sealing of the place of sticking.
- 🎣 Effort valves - located in the nose and stern, prevent the rupture of cylinders in the sun, work correctly.
Be sure to check the availability and performance of the discharge valves before the first outing in hot weather.
The bag is made of dense material, but the zippers on cheap models can catch up when sand hits. It is recommended to carefully fold the boat without pushing it with force so as not to damage the seams of the bag. Some owners immediately change the regular bag for a more spacious PVC bag.
Nuances of Assembly and Preparation for the Season
Assembly Triple 390 It takes about 15 to 20 minutes alone and 10 minutes with a partner, and it's best to inflate the cylinders with a foot or an electric pump, controlling the pressure with a pressure gauge, pumping the cylinders in cold weather and then going out into the sun will cause them to inflate and possibly deform.
Installation transom It needs attention: it needs to stand up vertically and be fixed at all attachment points. A transom luft is a common problem that can be treated by putting rubber gaskets or adjusting the fasteners. The reliability of the motor attachment is the key to safety.
☑️ Checklist of preparations for the first launch
When assembling, it is important to keep the bottom clean. Sand and small pebbles caught between the inflatable floor and the floorboard (if you have one in your modification) or just on the floor will create discomfort and can wipe the material when cruising actively. Regular washing and drying the boat after fishing prolongs the service life.
⚠️ Warning: Never leave a fully pumped boat in direct sunlight unattended. The air pressure inside rises and the valves may not be able to blow the excess, causing the seams to rupture.
Comparison with competitors and modifications
On the market. Triple 390 It competes with models from Flagship, Master. and brigTriera's main advantage is often priced with similar specifications, but competitors may offer better hardware or a reinforced transom as standard.
There are various modifications of this boat, differing in the type of bottom (NDND vs. mutual) and the presence of additional options, such as: hanging-seat High-pressure inflatable floor (HPD) models are valued higher for their ability to be used with more powerful motors and for their seaworthiness.
| Parameter | Trier 390 (NDND) | Analogue (Pyol) | Units |
|---|---|---|---|
| Full length | 3.90 | 3.90 | n |
| Width | 1.65 | 1.60 | n |
| Load capacity | 650 | 600 | kilogram |
| Boat weight | 52 | 48 | kilogram |
| Max, engine power. | 15 | 10 | hp |
When choosing between the pile version and the NDND, you should be guided by the frequency of use. If the boat is assembled in the garage, the pile option is easier and cheaper. Triple 390 It provides incomparably greater comfort.
Typical problems and long-term experience
After two to three seasons of active use, owners begin to experience the first signs of wear, most often the coating on the transom from engine exhaust and fastener friction, it is recommended to use special protective linings or regularly treat the transom with protective compounds.
Another problem is the unsticking of the leer arches or handles, which occurs due to a violation of the gluing technology in the factory or the introduction of aggressive chemicals (gasoline, oil) on the seam, and repair of such damage is possible at home with two-component glue for the use of a single-use adhesive. PVC.
How do you extend the life of the valves?
To prevent the valves from being jammed with salt water or dirt, wash them with fresh water after each exit. Once a season, it is recommended to lubricate the moving parts with silicone-free oil grease.
The fabric can fade over time, especially if the boat is kept outdoors. Ultraviolet is the main enemy of polymers. Color loss does not affect strength, but signals the beginning of degradation of the upper layer. Storage in a case or room significantly slows down this process.
Summary: Is it worth buying?
In summary, we can say that the boat Triple 390 It's a very strong middle class, and it's not without the disadvantages of the budget segment, but it offers great functionality for the money, and for beginners who want to try out motor fishing, it's one of the best ways to get into the topic.
Trier 390 is ideal for fishing in medium-sized water bodies and rivers with moderate currents, where you do not need to overcome a serious wave and develop high speeds.
If you are willing to put up with the need for careful care, periodic gluing of trifles and replacement of regular oars, then this boat will serve you faithfully for 5-7 seasons.
Frequently Asked Questions (FAQ)
What is the optimal pressure to pump into the cylinders and bottom?
For cylinders, a pressure of 0.25-0.3 atm is recommended, and for an inflatable floor (BND) - up to 0.6-0.8 atm. Always check the instructions on the valves, as the indicators may vary depending on the air temperature.
Can I put a 390 electric motor on Trier?
Yes, installation. electric motor It's possible, and it's even popular among quiet fishing enthusiasts, but you should consider the weight of the battery, which can shift the center of gravity, and you should put the battery on your nose or in the center for balancing.
Is it difficult for Nasco to seal a boat in the field?
Small punctures can be sealed with a special remix, included in the package. For serious damage (cuts more than 3 cm), full vulcanization or professional gluing with warming is required, which is difficult to do in the field.
Will the boat fit in the trunk of the sedan?
In a deflated form and packed in a bag, Triple 390 It has dimensions of about 100x50x40 cm In most middle-class sedans it will fit in the back seat or in the trunk with the backs folded, but it may be necessary to remove the wheels from the car for transportation in a station wagon or hatchback.