Choosing a swimming aid for fishing or a family holiday on the water often poses a difficult dilemma for the buyer: to find a balance between cost, size and reliability. Urex 350It has been one of the bestsellers in the domestic market for several years. Boat Urex 350 This is a classic example of how time-tested design solutions are combined with affordable pricing.
Many aquatic motorists choose this model for its versatility and ease of use in different weather conditions, it is great for both quiet movement in reservoirs and active fishing using a small outboard motor. In this article, we will discuss all aspects of the design in detail so that you can make an informed decision about the purchase.
Design features and materialsThe basis of durability of any inflatable boat is the quality of the materials used. Urex 350 reinforced PVC It is a high density, which is highly resistant to mechanical damage and ultraviolet radiation, and the seams are made by hot gluing, which ensures that the joints are tight even when they are under load for long periods.
The design of cylinders provides for the presence of keelIt's a slug that makes the bottom stiff and improves the boat's rideability, and it's a configuration that makes it easier to steer and reduces the risk of yaw when you're going against the wind, and it's important to note that the density of the fabric allows you to use the boat in conditions where you can come in contact with rocky bottoms or shells.
The developers have focused on abrasion protection, and in the most vulnerable areas, such as the transom and bow, there are reinforced rubber linings. The Urex inflatable boat It is also equipped with a bolt around the perimeter, which protects the sides from impacts on the berth or the side of another vessel when mooring.
⚠️ Note: Despite the high strength of the material, avoid dragging the boat on the sand or gravel shore without a protective coating, as abrasive particles can damage the bottom of the cylinders.
Comfort and interior spaceInternal layout of the model Urex 350 It's designed with ergonomics in mind to accommodate two or three people. plywoodThis is especially important for fishermen who need to change positions frequently or install additional accessories.
For the convenience of passengers, there are soft inflatable seats that are fixed in special anchorages. differentiation The spacious cockpit allows you to place fishing boxes, sonar or fuel without compromising freedom of movement.
The equipment attachment system includes a perimeter liner cable that can be held in an emergency or used to fasten the cargo, and the design also provides convenient handles for carrying, which facilitates descent and transportation in assembled form. The working length of the cockpit is 210 cm, which is the optimal performance for the class 350.
Technical specifications and load capacityTo objectively assess the capabilities of the vessel, you need to refer to dry numbers. Urex 350 It has specifications that allow you to classify it as a reliable tool for small bodies of water. Below is a table with the main parameters that should be considered when choosing.
| Parameter | Meaning |
|---|---|
| Total length | 350 cm |
| Width (maximum width) | 148 cm |
| Load capacity | 560 kg |
| Boat weight (set) | 42 kg |
| Maximum engine power | 15 hp |
Claimed loading capacity The 560 kilogram payload is not only a passenger, but also a significant amount of equipment, but it is worth remembering that the actual payload is always less than the theoretical one, due to the weight of the boat, the engine and the fuel, and the optimal load for a comfortable and safe voyage should not exceed 80% of the maximum.
The transom plate is made of multi-layer plywood and reinforced with linings, which allows you to install engines with a capacity of up to 15 horsepower. When installing a more powerful engine, there is a risk of damage to the transom or loss of controllability by the vessel at high speeds. Urex 350 inflatable boat shows the best results with engines in the range of 5-9.9 hp
⚠️ Warning: Never exceed the maximum recommended power of the outboard motor specified in the product passport, as this can lead to the destruction of the transom plate and the tipping of the boat.
Assembly, installation and preparation for descentBoat assembly process Urex 350 It doesn't require any special skills, but it will reduce the time of preparation, and the first step is always to lay the cylinders on a flat surface and check for no sharp objects, and it is recommended to inflate the cylinders to a state of elasticity, but not pumping them, especially in hot weather, when the air inside expands.
☑️ Checklist for descent preparation
Installing the plywood floor requires care: plywood sheets must be docked tightly, without gaps, and fixed in guide profiles. Incorrectly assembling the floor can lead to deformation under load or the appearance of creaks during movement. Once the floor is installed, the pendant must be inflated to working pressure, which will give the structure final rigidity.
The final step is to install the transom plate and attachments, make sure all valves are closed and there is no etching. Boat Urex 350 It's ready to go down when all the elements are in their normal seats and securely fixed, and it's recommended to do a short-term test swim off the coast before going to the depth.
How to properly store the boat in folded form?
Keep the boat in a dry, cool place, away from the heaters. Before packing, be sure to dry the fabric and paioles to avoid mold. It is better to fold not bend, but twist into a roll, alternating the direction of twisting at each package.
Water operation and driving performanceOn the water. Urex 350 It exhibits the confident behavior of inflatable keel boats, it holds the wave well and has a soft stroke, extinguishing the impacts on the water thanks to air balloons, and when driving on the engine, the boat easily goes into planing with the right load and the screw is selected.
The boat's handling depends on the weight distribution of passengers and cargo. For better course stability, it is recommended to place heavier loads closer to the center of the cockpit or at the stern, if the design allows. The Urex inflatable boat It has good maneuverability, which is especially appreciated when fishing in reed-covered places.
In windy weather, the sailing of the boat can affect the course, so it is important to keep the engine ready for direction correction. Using an anchor when fishing requires caution: anchor should be strictly attached to the bow pod to avoid tipping over in a sharp jerk. PVC It resists the effects of fuel well, but spilled gasoline is better to wipe immediately.
Tip: For quick drying of the boat after fishing, use a car compressor in blow mode, directing the air flow to the open valves for a few seconds to remove the residual moisture from the inside.
Care, maintenance and durabilityLong service life Urex 350 After each operation, the boat must be rinsed with fresh water to wash away salt, sand and organic residues, and it is recommended to treat the surface with special means to protect PVC from ultraviolet radiation, especially if the boat is often in the open sun.
Regular pressure checks in cylinders will help to detect small punctures or etching of air through valves in time. For minor damage repairs, a remix with glue and patches is usually included in the kit. Urex 350 inflatable boat With careful attitude, it is able to serve the owner for more than 10 seasons of active operation.
Special attention should be paid to the condition of the seams and gluing sites. If there are signs of stratification or bloating of material in these areas, you should immediately stop operation and contact the service center or repair yourself, following the instructions. Proper wintering in a warm room significantly prolongs the life of plasticizers in the fabric.
Key conclusion: Regular washing with fresh water and storage in a dry place at a temperature not lower than -10 ° C is the key to the longevity of your PVC boat.
Comparison with competitors and final verdictIn its price segment Urex 350 The main advantage is the combination of price and equipment, including a hard floor and an inflatable keel. Many of the analogues in this price category offer either a simpler slate floor or have a lower load capacity.
Compared to the more expensive models, boat It may be inferior in weight to the fabric used and the ergonomics of certain elements, such as the shape of the handles or the quality of the bag-pack. However, for most fishing and recreational enthusiasts, these nuances are not critical, but the main thing is the reliability and predictability of behavior on the water, which this model provides to the fullest extent.
To sum up, it is a great choice for those looking for the first serious boat or a reliable reserve vessel, which does not require complex maintenance, is easy to assemble and has enough safety margin for confident navigation. The best choice for water bodies with moderate wind load and family holidays.
What is the real speed of the boat Urex 350 with an engine of 9.9 hp?
At full load (2 people and equipment) the speed is about 20-22 km / h Alone boat can accelerate to 28-30 km / h, going to planing mode.
Can I use a boat in winter or in cold weather?
The PVC material retains elasticity at low temperatures, but it becomes stiffer in the cold, and exploitation is possible, but care is required during assembly and pumping, so as not to damage the seams squeezed by frost.
How long does it take to assemble and disassemble a boat?
The initial assembly takes about 20-30 minutes, and with experience and the use of an electric pump, the time is reduced to 10-15 minutes, and the dismantling usually takes place faster.