Choosing a swimming aid for fishing or resting on the water is often a difficult test, especially when the budget is limited and reliability requirements are high. aluminum-boat The Alumax 355 is a compact vessel designed for those who value practicality and durability, putting aside excesses in favor of functionality, and the ease of transportation and the ability to operate even in shallow waters make this one of the most sought-after options among quiet hunters.
The hull is built of aeroplane alloy, which ensures no corrosion and high impact resistance. Alumax 355 visa They're not afraid of fire sparks or accidental hooks on sharp driftwoods. bottom thickness of 2 mm It is a key factor in making you feel confident on rocky rolls, while keeping the weight of the boat low enough for one person to load it onto the trunk of a passenger car without the use of sophisticated lifting equipment.
In this article, we will take a look at all aspects of owning a boat, from technical details to real-world experience in different weather conditions, and learn which engine is optimal for this model and how to properly prepare the boat for the first season, avoiding the typical mistakes of beginners.
Structural features and materials of the body
The basis of the durability of any boat is the material from which it is made. In the case of the Alumax 355, a high-strength aluminum-magnesium alloy is used. This material has a unique property: it does not crack like fiberglass, but only deforms, which makes it easy to restore the geometry of the side or bottom in the field. Anti-corrosion treatment Welding seams are carried out at the plant, which eliminates the need for additional sealants in the first years of service.
The geometry of the hull is designed to be specific to Russian water bodies. Flat bottom with small zygomatic bends provides excellent stability in standing water and when fishing for throwing. However, it should be noted that at a strong wave this shape can give a tangible sway, so the speed of the wave should be controlled. The boards are high enough to eliminate the risk of water flooding even with sharp movements of the fisherman inside the cockpit.
⚠️ Attention: Despite the high strength of the alloy, avoid hitting concrete piers at high speed - this can lead to dents that are difficult to straighten without special equipment.
The transportable qualities of the model also deserve a special mention. The light weight makes it easy to maneuver a boat on a trailer or a fiber. In addition, the rigid design does not require constant pumping of cylinders and checking the pressure, which saves time before each outing. To protect against splashes and sun, an awning is often installed, which is included or purchased separately.
Technical specifications and dimensions
When choosing a vessel, it is critical to understand its real dimensions and carrying capacity. The 355 is a small boat class, making it ideal for single fishing or for two trips. The dimensions are chosen to meet the requirements for registration with GIMS, but owners still need to remember the rules of safety on the water.
Below is a table with the main technical data that will help determine the feasibility of buying this modification for your tasks:
| Parameter | Meaning | Unit of measurement |
|---|---|---|
| Longest length | 3.55 | square |
| Midwidth | 1.45 | square |
| Height of board | 0.40 | square |
| Load capacity | 400 | kilogram |
| Body weight | 65 | kilogram |
With a 400 kg load capacity, two adults can be accommodated, a set of gear and a small fuel supply. It is important to distribute the weight correctly: heavy batteries and crates should be placed closer to the diametric plane and closer to the stern for better germination. Exceeding the recommended load can lead to a lower freeboard height and an increased risk of water flooding.
The recommended engine power varies depending on the desired speed and load. the manufacturer allows the installation of engines with a capacity of up to 15 hp, but the optimal range is considered to be 5-9.9 hp This engine will provide a confident exit to plane with one person on board and a cruising speed of about 25-30 km / h.
Ergonomics and internal arrangements
The interior of the boat, Alumax 355, is organized as utilitarianly as possible, there are no plastic linings, all surfaces are functional, the floor is made of corrugated aluminum, which prevents slipping even in wet shoes, and this is especially important when catching large fish or in rainy conditions, when the safety of movement inside the cockpit comes to the fore.
The seats are made in the form of removable cans that can be easily rearranged or removed altogether to make room for large loads. The cans fasteners are reliable and have no backlashes, as evidenced by many years of use. If necessary, the owner can make soft linings or install more comfortable seats on swivel bases.
- 🎣 The presence of a transom hole allows you to conveniently output the sonar or sensor of the navigator without drilling the body.
- 🔋 The space under the front jar is often used to install a battery protected from moisture and splashes.
- 🛡️ The boards are equipped with a bolt, which takes on the blows when mooring, preserving the integrity of the metal.
You can use special bags to store small things, which are attached to the sides on suction cups or carabiners. Standard equipment does not provide built-in handbags, which, however, is a plus for those who like customization. You decide where and how your tools will be located.
Use magnetic holders for a smartphone or navigator on aluminum boards – they are securely fixed and do not occupy useful space on the floor.
Operation and maintenance of the aluminum case
Aluminum boats are notorious for being unpretentious, but that doesn't mean there's no need for care at all. The main cancer of the metal is electrochemical corrosion, which can occur when it comes into contact with other metals in salt water. zinc protectorIf it is installed, and change it in time.
After each outing, especially if the swim was in salty or polluted water, it is recommended to rinse the body with fresh water. This will wash away the residues of salt and dirt, which, when drying, can form an abrasive plaque.
⚠️ Note: Do not use abrasive powders or hard metal brushes to clean the case - they will damage the oxide film and can provoke local corrosion.
Keeping a boat in the winter requires no special conditions, except dryness. Aluminum is not afraid of temperature changes and does not lose its properties in the cold. However, it is better to treat the metal parts of the transom and fasteners with conservation lubrication before storage, this will prevent oxidation and jamming of bolt joints for the next season.
☑️ Annual maintenance of the boat
Comparison with competitors and analogues
There are many similar models on the market, but the Alumax 355 Visa stands out for its price positioning. When compared to other manufacturers, it is obvious that this model offers an optimal balance between cost and quality of execution. Competitors often offer either a thinner metal or a higher price for similar specifications.
Unlike fiberglass boats, aluminum is easier to repair, dents can be knocked out, cracks can be brewed, and fiberglass requires a complex process of polishing, resin and drying, which is impossible in field conditions, making the Alumax 355 the preferred choice for remote fishing, where service is not available.
On the other hand, aluminum hulls can be more noisy on the wave and when moving, and the sound of rain or waves on the side is heard more clearly than in plastic or inflatable boats, a factor that can be critical for those who prefer absolute silence, but for most fishermen this is not a significant problem.
The secrets of noise insulation
To reduce noise, you can paste the interior and bottom with vibration insulation materials used in the automotive industry, which will also improve thermal insulation and reduce condensation.
Final selection recommendations
The Alumax 355 is a reliable tool for specific tasks, not a fast boat for sea trips, but ideal for fishing on lakes, rivers and reservoirs, and its strength and ease of maintenance make it an excellent choice for beginners and experienced water-engineers alike.
When buying, pay attention to the configuration and condition of the welds. Quality factory welding should not have burns or visible defects. Also check the geometry of the transom - it must be strictly perpendicular to the bottom so that the motor works efficiently and does not create yaw on the course.
- 🚤 It is ideal for fishing in small and medium-sized waters.
- ⚙️ It requires minimal maintenance compared to other materials.
- 💰 It has high liquidity in the secondary market due to the popularity of the brand.
Alumax 355 visa is a choice in favor of practicality and durability, where the main thing is the result of fishing, not the external gloss.
If you are looking for a boat that will last decades and will not fail at a critical moment, then this model definitely deserves your attention. Proper operation and timely care will allow you to enjoy the water element for many years without serious investment.
Do I need to register a boat Alumax 355 in GIMS?
Yes, registration is required if the weight of the curbed vessel with the installed engine exceeds 200 kg. Since the weight of the boat is about 65 kg, then when you install the engine weighing more than 20-30 kg (which is typical for power from 5 hp) and the battery, you are likely to exceed this threshold.
Can I install a 15 hp engine on Alumax 355?
Technically, the hull will withstand this power, and the transom is often reinforced under similar loads. However, with a full load (two people + cargo), the engine of 15 hp may not bring the boat to plane or the exit will occur at the limit of capabilities. Optimal use of 9.9 hp, which will ensure better handling and economy.
How to deal with condensation inside an aluminum boat?
Condensation is a natural physical process for temperature extremes, and to combat it, use absorbent floor mats, ventilate the boat regularly after fishing, and store it in a dry place with open rundocks, and special moisture absorbers also help.