PVC boat Volzhanka-44 Fish. One of the most popular models among fishermen and hunters due to the successful combination of compactness, load capacity and affordable price. "Voljanka Boats"This model is positioned as a versatile solution for freshwater fishing, short trips on rivers and lakes, and also for use as an auxiliary boat on yachts or boats. "Fish" version It has a reinforced bottom and a special layout that facilitates the installation of fishing equipment.

The secret of the success of "Volzhanka-44 Fish" lies in its adaptability: the boat is equally well performing with an outboard motor up to 10 hp, and on oars. 44 kg It allows you to transport it even in the trunk of a car (with the right packaging), but there were also trade-offs: some users note that the car is not a car that is not a car that is not a car that can be transported. tendency to “striking” the nose on the wave at full loadThis requires additional load balancing or installation of transom weights.

In this article, we will analyze the technical specifications of the model, compare it with competitors (for example, the model is not a competitor). Flagship 320. or Corvette 430.We will also give practical recommendations for operation, from the choice of engine to storage in the off-season, and pay special attention to the pitfalls that the manufacturer does not mention: for example, why standard seats can be uncomfortable for long trips, and how to fix it yourself.

## Technical specifications of "Volzhanka-44 Fish"

The main parameters of the boat are given in the table below. maximum load capacity This is a critical indicator that is often ignored by beginners: exceeding the permissible weight not only reduces stability, but also increases the risk of damage to the seams when hitting an obstacle.

Parameter Meaning
Length, m 3.45
Width, m. 1.55
Height of the board, see 42
Boat weight, kg 44 (±2)
Max. load capacity, kg 500
Max, engine power, hp. 10
Number of cans 3 (including the transom)
Material of PVC Reinforced, 750 g/m2
⚠️ Note: Manufacturer indicates the load capacity 500 kgbut this value is calculated for static When driving with the engine, the recommended weight of the crew and equipment shall not exceed 350-400 kgOtherwise, controllability deteriorates sharply, and the nose begins to peck.

Design features:

- Strengthened bottom with an additional layer of PVC in the nose (thickness) 0.9 mm against 0.7 mm mm on boards.

- The transom jar removable, which allows you to transform the boat for fun or motor operation.

- Nose compartment has an increased volume for storing equipment, but its tightness leaves much to be desired - with heavy rain, water seeps through the valves.

📊 How do you plan to use the "Volzhanka-44 Fish"?
For fishing on lakes
For river trekking
Like a boat to the boat.
For hunting.
Other

## Advantages and disadvantages of the model

Like any PVC boat, Volzhanka-44 Fish. We analyzed the owner feedback (more than 200 posts on forums) and identified key points.

Pros:

  • 💰 Price/quality: one of the most affordable boats in the class with a reinforced bottom (from 85 000 rubles. in basic configuration).
  • 🚗 Transportability: in the folded form it occupies 1.2 × 0.6 × 0.3 mIt is placed in the trunk of most crossovers.
  • 🔧 Repairability: PVC material is well sealed with standard sets (for example, "Unirem." or "Boston.").
  • 🎣 Fisherman's ergonomics: provides for sonar mounts, fishing rods and battery box.

Cons:

  • 🌊 Resilience on the wave: with side wind or excitement from above 0.5 m m m m Management experience is required.
  • 🪑 Standard seatsHard and unregulated - after 3-4 hours on the water begins to hurt the back.
  • ⚙️ Trans anchorage: bolts often unwind when the engine vibrates, periodic monitoring is necessary.
  • 💧 condensate: moisture accumulates in the bow compartment if the boat is not dried after use.
💡

For comfortable operation of "Volzhanka-44 Fish" be sure to modify the seats (for example, add polyurethane foam linings) and install additional mounts for the transom.

Comparison with competitors: which is better?

To understand how Volzhanka-44 Fish. It is profitable compared to its counterparts, we compared it with three popular models in the same price segment.

| Model | Voljanka-44 Fish | Flagship 320 | Corvette 430 | Honda FB-340 |

|----------------------|----------------|---------------|---------------|---------------|

| Length, m | 3.45 | 3.20 | 3.40 | 3.40 |

| Width, m. | 1.55 | 1.45 | 1.50 | 1.58 |

| Max. Engine, hp.| 10 | 8 | 9.9 | 15 |

| Weight, kg | 44 | 38 | 42 | 52 |

| Load capacity, kg | 500 | 400 | 450 | 550 |

| Price, rub. | from 85,000 | from 78,000 | from 92,000 | from 120,000 |

What to choose?

- If you need it. maximum load capacity the ability to install the engine before 15 hpPay attention to this Honda FB-340Be prepared for more weight and price.

- For compactness and easy transportation fit Flagship 320.But it's losing stability on the water.

- Corvette 430. - the golden mean, but its PVC (650 g/m2) thinner than the Volzhanka.

💡

When choosing between “Volzhanka” and “Corvette” pay attention to the weld-qualityIn Volzhanka, they are glued with additional tape, which reduces the risk of discrepancies during intensive operation.

What engine is suitable for Volzhanka-44 Fish?

The manufacturer declares the maximum power of the engine in 10 hpBut in practice, it depends on the load of the boat and the conditions of the voyage.

1. For calm water bodies (lakes, ponds):

- 2-5 hp. (for example, «Honda BF5» or «Mercury 3.5») - enough to move 2-3 people with equipment. 1.5-2 l/hour.

- PlusesLow noise, economy, does not require registration with GIMS.

- Cons: weak move against the current.

2. For rivers with a current or windy lakes:

- 8-10 hp. («Yamaha 9.9», «Suzuki DF9.9») - optimal for full loading. 25-30 km/h.

- Pluses: good power reserve, resistance to wind.

- Cons: requires registration, higher fuel consumption (3-4 l/hour).

⚠️ Attention: When installing the motor 10 hp on Volzhanka-44 Fish, be sure to strengthen the transom fastening with additional metal plates. M8 They may not be able to withstand vibrations at high speeds.
Can I get a motor more powerful than 10 hp?

Theoretically, yes, but it violates GIMS rules and voids the manufacturer's warranty, and the stern of the boat can sink, which will lead to flooding of the sides on the wave. 15 hpFor example, "Volzhanka-48 Fish" or Kazanka-5M..

Operation and care: extending the service life

PVC boats require regular maintenance, otherwise the material loses its elasticity and the seams diverge. checklist of mandatory procedures:

Freshwater wash (salt, sand, algae removal)|Drying of inflated cylinders in the shade (not in the sun!)|Testing of cylinder pressure (norm: 0.2–0.25 kg/cm2)| Treatment of seams with silicone lubricant (1 time in 2 months)|Storage in a case of breathable material->

What you absolutely cannot do:

- Dry the boat. sunny PVC becomes brittle and the glue in the seams is destroyed.

- Use it. detergent (e.g., powders) - they scratch the surface.

- Keep the boat safe. folded They are then filled with hardships that are then hard to break.

💡

To remove persistent contaminants (oil, fish blood), use specialized PVC cleaners, for example, «Star brite PVC Cleaner» or «Polyboat»Do not use solvents (acetone, white spirit) - they corrode the material!

Tuning and improvements: make the boat more comfortable

Even the factory-made Volzhanki-44 Fish leaves room for improvement. TOP-5 useful improvements from experienced owners:

1. Tranx reinforcement

Install an additional aluminum plate thickness 3-4 mm This will prevent the motor from playing when it's excited.

- Cost: ~1,500 rubles. (material + work).

2. Replacement of seats

- Replace the standard banks with adjustable seats with shock absorbers (e.g. from "Flagman.") The alternative is homemade polyurethane foam linings.

- Costfrom 3,000 rubles. for the kit.

3. Installation of the battery box

- In the nose compartment, a sealed box for battery is mounted (for example, «Plano 1912»This will protect the electronics from splashes and condensation.

- Plus.: You can connect the sonar or light.

4. Additional handles for carrying

- Stick it on. nylon-hands This will make it easier to pull the boat ashore, especially if you are alone.

5. Fastenings for fishing rods

- Install. pole-post (for example, «Railblaza») or homemade PVC tube holders, which will free up the hands to control the engine.

⚠️ Note: When drilling holes under the fasteners, be sure to use sealant (for example, «Sikaflex-291») and neoprene gasket, which will prevent leakage in the attachment sites.

Frequent breakdowns and how to avoid them

Even with careful operation, Volzhanka-44 Fish can fail. common and ways to prevent them:

1. Seed discrepancy

- Reason.: overload, impacts on obstacles, poor-quality gluing during production.

- PreventionAvoid contact with sharp objects, check the pressure in the cylinders regularly.

- Repairs: stamping with special glue (for example, «Bostik 2402») with a reinforcement patch.

2. The transance sitting

- Reason.: weakening of the mounts or deformation of PVC under the weight of the motor.

- Prevention: reinforce the transom with an aluminum plate as described above.

- Repairs: if the PVC has bent, you can install an additional support of fiberglass.

3. Valve leak

- Reason.: sand ingress or wear of sealing rings.

- PreventionAfter each exit, wash the valves with fresh water.

- Repairs: valve replacement (cost: ~ ~ )500 rubles.).

4. Blasting cylinders

- Reason.: friction on the shore or rough floor during transportation.

- PreventionUse protective covers or stick reinforced tape on vulnerable areas.

💡

The most common failure of Voljanka 44 Fish is the misalignment of the seams in the nose, which is because when you hit an obstacle, the load is on the front cylinder. nose-ring (cost: ~2,000 rubles.).

## FAQ: Answers to popular questions

Can I use the Volzhanka-44 Fish at sea?

Technically yes, but with reservations: the boat is not designed for waves higher than the height of the boat. 0.5 m m m mAt sea, it can only be operated in closed bays or lagoons at calm. For open water, choose models with a keel and reinforced cylinders (for example, "Zodiac Kadak 380").

Which pump is better for pumping?

The best option is two-stage pump manometered (e.g., «Bravo BP-12»It allows the cylinders to be rapidly pumped to the working pressure (0.2–0.25 kg/cm2Cheap foot pumps often don't provide the pressure needed.

How many people can fit in a boat?

Passport - up to 4 people, but in practice, only three people are comfortable (with a motor) 5-10 hp.When fully loaded (4 men + equipment), the boat becomes a roller, and the nose rises above the water, which complicates the operation.

Do I need to register a boat with a 9.9 hp engine in GIMS?

According to the order of the Ministry of Emergency Situations No. 447 of 2020, all engines with power from the 5 hp For the Volzhanka-44 Fish with the engine 9.9 hp will require:

  • Passport for boat and motor.
  • Receipt for payment of the state duty (1,600 rubles.).
  • Application to the local office of GIMS.

Registration period: up to 10 days.

How to keep a boat in winter?

Ideal conditions:

  • Temperature: +5…+15°C (not lower) 0°CSo that PVC does not lose its elasticity.
  • Humidity: not higher 60% (exclude dampness).
  • Position: suspended on broad straps or folded in a cover foldless.
  • Treatment: Before storage, wipe the cylinders with talc or a special PVC lubricant.

It is absolutely impossible to store the boat next to heating batteries or in an unheated garage at sub-zero temperatures!