Choosing the first serious inflatable boat is always a compromise between price, quality of materials and desired driving performance. Wyatt 390 R It's a common sight for those looking for a reliable fishing boat on large bodies of water, but the budget is limited. In this article, we've collected and analyzed real-world experience so you can see if this model is worth your investment.
Many potential buyers are looking for information about how this case behaves on the wave and how durable the PVC reinforced reinforced by the manufacturer is. Objective feedback We'll help you weed out marketing tricks and see the real story, and we'll look at the design, the ease of assembly, and the nuances that come up after the active season.
It is important to understand that wicket It's positioned as a utilitarian boat, not a racing car, so it's going to be evaluated in terms of practicality, maintainability and performance, and if you're planning to use the boat for trolling or long transitions, this review is going to be critical.
General impression and quality of body assembly
The first thing that catches your eye when unpacking is the weight of the kit. The boat is really heavy, which indicates the density of the material used. reinforced PVC 5 mm thick is a trustworthy feature, which is hard to accidentally damage against a snag or a rock in shallow water, but this same feature makes the assembly a physical activity, especially if you are used to lighter models.
The quality of the seams is a separate topic to discuss, and most users praise hot-stitched factory gluing, but there have been isolated reports of additional joints being smeared in high-voltage areas, such as at a transom or a timber. Wyatt 390 R It requires careful inspection immediately after purchase to exclude production defects.
inflatable tubes are designed to have a timber around the perimeter, which not only protects the side from impact, but also serves as a convenient handle for carrying and maintaining balance. Inside the cockpit, the space is quite well organized, although some anglers complain about the rigidity of the inflated bottom, which is solved by installing an additional mat.
⚠️ Warning: When accepting a boat, be sure to check the valves for tightness under load. Sometimes factory marriage manifests itself in the loose fit of the valve membrane.
And the color of the fabric is also worth mentioning, and the standard gray or camouflage color is good at hiding pollution, but it can get very hot in the sun. The temperature inside pumped cylinders in summer can reach critical values, so do not leave the boat on the shore in direct rays without an awning.
Driving qualities and behavior on the water
How he behaves. Wyatt 390 R This is probably the most important question for any boating, because the boat has very strong keel contours, which makes it very good at wave germination, and unlike flat-bottoms, this hull cuts water rather than slaps it, which reduces the impact load on the crew's spine.
However, for stability and course stability you have to pay increased resistance. To enter the planing with two passengers and cargo, you will need a motor with a capacity of at least 9.9 hp, and optimally - 15 hp. A weak motor will drive you into transition mode, where fuel consumption is maximum, and speed is minimal.
Owners also note good handling. The boat doesn't scour in a straight line, follows the steering wheel clearly and is predictable in corners. operation It's safe even for beginners, and it tends to tilt moderately when it's sideways, keeping the cockpit dry due to its high-side.
And the quiet behavior deserves special attention, because it's almost 4 meters long, and it has inertia, which is convenient for trolling, and it stays on course at the slightest gust of wind, allowing you to focus on wiring the bait.
Comfort and ergonomics of the cockpit
Ergonomics in inflatable boats often suffer, and Wyatt 390 R The width of the cockpit allows two adult men with a full set of equipment to comfortably fit. Seats (banks) are usually complete, they are made of plywood with coating, but many owners prefer to replace them with softer counterparts or use inflatable pillows.
The location of the transom plates and motor mounts is conveniently designed. The adjustment of the depth of the dip in lower unit is done effortlessly. However, access to the bow can be difficult if the boat is fully loaded with things in the middle. For the angler, this means that all tackles must be on hand to stay away.
Inside the cockpit, there are often sonar mounts or rod holders, but their quality leaves much to be desired. Plastic elements in the cold become fragile, so experienced users recommend immediately replace regular accessories with metal or higher-quality analogues.
To increase comfort during long fishing, install a removable thermal insulation mat made of EVA material on the floor of the cockpit. It will not only warm the legs, but also protect the bottom from punctures.
There's plenty of legroom, which is important for tall people, and the ability to stretch your legs reduces fatigue on long walks, and in general, ergonomics are rated as "working," no frills, but functional.
Transport and storage
Transportation Wyatt 390 R The boat is a large volume when assembled, and when packaged, the weight of the kit can reach 50-60 kg (including engine and equipment), and it will take skill to carry all the components in the trunk of a passenger car.
The material of the cylinders is resistant to temperature changes, but long-term storage in an unheated garage in winter requires compliance with the rules. You can not leave the boat in a deflated state under heavy objects - cloth crevices can form, which eventually turn into cracks.
For storage, it is best to use special suspension systems or wide soft supports, which will prevent deformation of the bottom and preserve the geometry of the hull. If you keep the boat assembled, be sure to relieve the pressure in the cylinders as the ambient temperature changes.
☑️ Preparation for winter storage
Don't forget that PVC They're afraid of rodents. Mice and rats can bite the cloth if the boat is kept in a shed without proper protection, use ultrasonic repellents, or place traps near the storage area.
Comparison with competitors and pricing
In the inflatable boat market Wyatt 390 R It competes with models such as Flagship 380, Mev Cayman 385 Compared to them, the Vyatbot often wins in price by offering similar specifications, but the quality of the fittings may be higher among competitors.
If we look at the comparison table, we can see exactly where the manufacturer saved to offer a low price:
| Characterization | Wyatt 390 R | Competitor (Flagship/Menev) | Advantage |
|---|---|---|---|
| PVC density | ~900-1000 g/m2 | ~1100 g/m2 | Competitors are stronger |
| Price. | Low. | Medium/High | Wettock is more accessible. |
| Completement | Basic | Expanded | Depends on the seller. |
| Guarantee | 1 year | 2-3 years | Competitors are more reliable |
For a beginner who wants to try himself in motor fishing and is not ready to spend huge sums, wicket It's going to be a great first boat, and it's going to give you a sense of your real needs, and it's going to be a good idea for professionals to prefer more expensive ones with better ergonomics and lightness.
The cost of spare parts and remixes for Vyatbot is also lower than for famous brands, which makes it easier to maintain. Find glue or patch the right color will not be difficult in any fish store.
Frequent problems and their solutions
Like any other technique, Wyatt 390 R They have their own childhood diseases, and most often, owners experience air poisoning through the valves in the first weeks of operation, whether it's by replacing the sealing rings or simply lubricating them with silicone.
The second common problem is that the timber is detached in places where there are strong bends, and if you notice the beginning of the process, don't wait for it to be completely unplugged. Timely repairs Special PVC adhesives (such as Texacol or Ranal) will solve the problem in 15 minutes.
⚠️ Warning: Never use Moment glue or other cyanacrylate-based household adhesives to repair PVC. They make the fabric brittle and inelastic, which will cause the seam to rupture when pumped.
The third nuance is the erasure of the protective layer at the bottom (kilson) with frequent pulling on the sand or pebbles. It is recommended to use a special protective tape or regularly inspect the condition of the bottom and glue new patches.
The secret of valve durability
Before each pump, wipe the valve thread and the seat with a dry cloth. The grain of sand that falls under the gum is guaranteed to lead to etching of air.
Also worth mentioning is the fittings, plastic carry handles can crack in the cold, and be careful when dragging a boat in the winter.
Summary and recommendations
To summarize the review, we can say that the boat Wyatt 390 R It's a strong middle class, and it's not without the disadvantages of the budget segment, but it's worth it, and it's a reliable workhorse for fishing, hunting, or just outdoor activities.
If you're willing to put up with weight and spend time on primary training (sewing, replacing fittings), this boat will serve you faithfully for many years, the main thing is proper care and storage.
The 390 R Vyatbot is the ideal choice for those looking for maximum capacity and stability on a minimal budget, ready to put up with a lot of weight.
Keep in mind that safety on the water depends not only on the boat, but also on the skills of the boatmaster. Learn the rules of behavior on the water and always carry life jackets.
How realistic is it to break the bottom of Vyatbot 390 R against the stone?
It's very difficult to break through a 5mm reinforced PVC with a conventional stone, but a sharp spike or a stick sticking out of the water when you're driving at full speed can cause damage, and the risk is minimal with careful driving.
Can I put on the Vyatbot 390 R engine 18 hp?
Technically, you can, the transom will withstand, but the boat will become too rolling and heavy to drive. The optimal limit for comfortable operation is 15 hp Exceeding power will not give a significant increase in speed due to the hydrodynamics of the hull.
How to wash the boat after fishing?
Use plain water and a soft sponge. Chemicals can damage the protective coating. After washing, be sure to dry the boat before packing to avoid mold and smell.
Does the Vyatbot have a 390 P GIMS certificate?
Yes, this model is usually certified for registration with GIMS, as its load capacity and dimensions are compliant, but the rules may change, so check the current requirements before buying.