Finding a reliable fishing or hunting boat often leads to a choice between comfort and practicality. Wellboat 37This project combines time-tested design, availability of materials and the possibility of deep modernization for specific user tasks.
Many owners note that this model allows you to implement many ideas for reworking, while remaining stable on the water even with heavy chop. Wellbot 37 It's not just a finished product, it's a great base for the perfect boat, and in this article, we'll go through the technical details, the installation of the equipment, and the real experience of the operation.
Design features and geometry of the body
The basis of the reliability of the vessel is its hull, made of aluminum alloy. Boat Wellboat 37 Traditionally made of AMg5 or AMg61 alloy, which provides high corrosion resistance and impact resistance. The bottom thickness is usually 3 mm, and the sides and transoms can vary from 2 to 4 mm depending on the modification and year of release. This geometry allows you to confidently get on the water even in rocky bottom conditions, where PVC tubes would be vulnerable.
The shape of the body belongs to the type of "monoreac" with a sharp nose and a pronounced keel, which provides excellent germination on the wave. The optimal length of 3.7 meters allows you to transport a boat on the roof of a passenger car without special permits. This is a critical factor for fishermen who value mobility and do not want to depend on trailers or boat trailers. The width of the hull in the midfield area provides sufficient stability for fishing in three or four.
The truncheon of the boat is reinforced and designed to fit outboard motors up to 15-20 hp, although many enthusiasts put more powerful units, reinforcing the design additionally. It is important to understand that the center of gravity is shifted closer to the stern, so when loading things, you need to correctly distribute the weight so as not to rattle your nose.
⚠️ Warning: When buying a used boat, be sure to check the condition of the welds in the area of the cheekbones and transoms. These are the areas that experience maximum stress when hitting a wave and can have microcracks.
For those planning to use the boat in difficult conditions, it is recommended to immediately pay attention to the quality of painting or the presence of powder coating. Factory painting is often thin, and many owners prefer to repaint the bottom with epoxy soils for additional protection.
Deck, paioles and interior arrangements
The interior of the boat Wellboat 37 The basic equipment often includes simple wooden paioles that can eventually decay or rot. The current approach dictates replacing them with moisture-resistant plywood of the FFS brand or, even better, with composite materials and grooved aluminum. slipperyIt's safe in wet weather.
The organization of rundooks deserves special attention. The nose is usually equipped with an anchor rundoog, which also serves as a bulwark for the legs when rowing or driving on the engine. The side cans are often removable or folding to make room for laying gear or prey. The proper zoning of the space inside the cockpit is the key to comfortable fishing.
☑️ Checklist of deck modernization
When designing interiors, it is important not to overload the boat, because overweight can have a negative impact on performance, and use lightweight materials where possible, such as aluminum profiles instead of steel corners for seat frames.
Power plant: motor selection and control
Selection of engine Wellboat 37 This is always a compromise between speed, fuel consumption and weight, and the optimum power range is 9.9 to 15 hp, and the engines can accelerate a boat with two passengers and a load of 25-30 km/h, which is enough to move along reservoirs and rivers.
When installing the motor, it is critically important to set the correct slab-stove It should be parallel to the bottom line or slightly lowered (10-20 mm) for better traction in the planing, and an error in the installation will either lead to yaw or the inability to go to the plane.
| Motor type | Power (hp) | Weight (kg) | Recommended application |
|---|---|---|---|
| two-stroke | 9.9 | ~35 | Single fishing, economy mode |
| two-stroke | 15 | ~40 | Two passengers, planing |
| four-stroke | 15 | ~45-50 | Comfortable operation, low noise |
| Electric motor | 1.0-1.5 kW | ~15-20 | Trolling, no-go zones |
Gas and tiller control can be output to the console, which greatly improves the ease of control, especially when trolling. Gas Cable But the installation of the console adds sailing and weight, which you have to consider.
Secrets of setting up a carburetor
If the engine stalls on idles after warming up, try to turn the screw of the quality of the mixture a little, and a common problem is clogging of idle jeeler, especially when using poor-quality gasoline.
Hinges and electrification
Modern fishing is unthinkable without a sonar, a navigator and lighting. Electrical equipment on a metal boat requires special safety regulations, all connections must be securely insulated, and the wiring is laid in corrugated tubes protected from rubbing against the sharp edges of aluminum.
The most common way to power the appliances is to use additional batteries placed in sealed boxes. The standard scheme includes the main battery for starting the engine and a traction or maintenance battery for the appliances. The charging splitter allows you to charge both batteries from one generator without risking discharge of the starter.
⚠️ Warning: Never attach batteries directly to the aluminum side or bottom without a dielectric pad. Vibration and possible short circuit can lead to electrochemical corrosion of the housing or fire.
The sonar brackets are better removable or rotary to be able to quickly remove the device when transporting or storming shallow waters, and the installation of running lights that comply with the rules of the MFPSS, which will allow legally moving at night, will also be a useful addition.
Use copper tin tips and glue-coated heat shrinkage for all electrical connections. Conventional tape on water quickly unstick, and oxides on the contacts will cause the electronics to fail at the most inopportune moment.
Transport and storage of the boat
One of the main advantages of the model Wellboat 37 The basic configuration is about 130-140 kg, which allows one person (if you have skill and tools) to drag the boat on the roof of the car.
When storing the boat, it is recommended to put on kilblocks or hang by slings to avoid deformation of the hull under its own weight. If the boat is stored outside, be sure to cover it with an awning or dense cloth to prevent the accumulation of precipitation inside, which can lead to freezing in winter or corrosion.
Winter conservation does not require complex procedures, just dry the inner cavities and turn the boat upside down or cover. Aluminum is not afraid of frost, but sudden temperature changes in combination with a humid environment can accelerate oxidation.
The main advantage of the 37th model is the balance between the strength of the metal and the weight that allows you to do without a trailer, which saves money and simplifies the logistics of trips to the reservoir.
Frequent Questions and Answers (FAQ)
What is the maximum speed of the Wellboat 37?
With a 15 hp engine and one passenger, the speed is usually 28-32 km / h With a full load (3 people + cargo), the speed drops to 20-22 km / h, the boat may not go to plane without the correct weighting.
Do I need to paint the boat inside if it is made of unpainted aluminum?
Painting inside is not necessary if you are satisfied with the natural appearance of metal. However, if you plan to make soft seats or knuckles close to the sides, it is better to treat the surfaces to avoid contact of heterogeneous materials and accumulation of moisture.
Can I install a windshield on the boat?
Yes, many people put homemade polycarbonate or Plexiglas glass, which greatly enhances comfort by cutting off the oncoming airflow and splashes, and the key is to secure the base so that the vibration does not shake the attachments.
Is Wellboat 37 subject to electrochemical corrosion?
AMG aluminum alloys are resistant to corrosion, but when in contact with copper, brass or stainless steel, galvanic vapor is possible in salt water. In fresh water, the risk is minimal, but it is recommended to use anode protection if the boat is standing on water.
How many people are comfortable in the boat?
Officially, the boat is designed for 3-4 people, comfortable only two with a full set of equipment, four can accommodate, but the space for maneuvering gear will be limited.