Windboat 47: a complete overview of the model for fishing and recreation

Windboat 47 It is one of the most popular PVC inflatable boats in the budget segment, and has won the trust of both beginners and experienced water-engineers, ideal for fishing, hunting, outdoor activities, and even short trips on a river or lake. Its compact size, light weight and high payload make it a versatile solution for those looking for a reliable vessel at an affordable price.

In this article, we will discuss all aspects in detail. Windboat 47From technical specifications to operational nuances, you'll learn which engines are right for this boat, how to store and maintain it properly, and compare it to the main competitors in the market, and focus on feedback from real owners, who will help avoid the typical mistakes in buying and using.

Technical specifications of Windboat 47

Boat. Windboat 47 belongs to the class of inflatable vessels with a hard transom, which allows you to install outboard motors with a capacity up to 15 hp The main parameters of the model are presented in the table below:

Parameter	Meaning
Length	4.7 m
Width	1.85 m m m m m
Height of board	0.55 m m
Maximum load capacity	650 kg or 5 people + motor + tackle)
Boat weight (without motor)	75-85 kg (depending on the configuration)
Maximum engine power	15 hp. (Recommended-- 9.9bhp.)
Material of PVC	High-strength 5-layer PVC densely 1100 g/m2

Feature Windboat 47 The construction of the bottom is enhanced: the manufacturer uses technology "Double V"It's a squirrel that improves wave performance and stability, and it keeps the boat well on course even in lateral winds, which is important for fishermen who are fishing on the current.

The standard equipment includes:

• 🔹 Forward and aft ladder for a convenient landing;
• 🔹 Removable seats (usually 2-3 pieces);
• 🔹 PVC Remake with glue and patches;
• 🔹 Pump (Hand or foot, depending on the configuration);
• 🔹 Transport bag (not in all versions).

⚠️ Attention: When buying, check with the seller whether it is included in the package. squirrel-wheel They make it easier to launch a boat, but are often sold separately.

Advantages and disadvantages of the model

Like any boat, Windboat 47 It has its pros and cons, and let's look at them in detail so you can objectively assess whether this model fits your needs.

Advantages:

• 💰 Price/quality: One of the most affordable boats in its class with acceptable performance.
• 🚤 Universality: Suitable for motors up to 15 hpThis allows you to develop speed up to 30–35 km/h.
• 🔧 Easy to repair: PVC material is easily repaired in the field with the help of a remplekt.
• 📦 Compactness: In folded form, it is placed in the trunk of a passenger car.
• 🌊 Good sustainability: Width 1.85 m m m m m Provides comfortable accommodation for 2-3 people.

Disadvantages:

• ⚠️ Weak ladders: As standard, plastic ladders often break down during intensive operation.
• ⚠️ Low side: Height. 0.55 m m It can be uncomfortable for tall people or in the wave.
• ⚠️ The quality of the glue: In some batches, the factory glue is peeled off - additional gluing of the seams is required.
• ⚠️ Absence of discharge valve: Water must be drawn out manually or modified design.

Many of the disadvantages can be solved by yourself, such as the stairs are easy to replace with aluminum, and the drain valve is installed at home, the main thing is to take these nuances into account when buying and budget for possible improvements.

What is the right engine for Windboat 47?

Choosing a motor for Windboat 47 It depends on your goals: for a quiet fishing on the lake is enough and 5 hpHigh-speed traffic on the river will be required 9.9-15 hpLet's look at the main options:

1. Motors up to 5bhp

• 🔹 Pros: Light, economical, do not require registration in GIMS.
• 🔹 Cons: It's not overspeeding. 15–20 km/h- Weak traction on the current.
• 🔹 Examples: Honda BF5, Mercury 5M, Yamaha 5FMHS.

2. 9.9bhp motors

• 🔹 Pros: Optimal balance of speed (25-30 km/h) and economy.
• 🔹 Cons: Registration is required, weight up to 40 kg It may be inconvenient to carry.
• 🔹 Examples: Tohatsu MFS9.9, Suzuki DF9.9.

3. 15bhp motors

• 🔹 Pros: Maximum speed (35+ km/h), good handling on the wave.
• 🔹 Cons: High fuel consumption, reinforced transom is needed.
• 🔹 Examples: Mercury 15M, Yamaha 15FMH.

4. Electric motors

• 🔹 Pros: They are quiet, environmentally friendly, do not require registration.
• 🔹 Cons: Limited operating time (depends on the battery capacity).
• 🔹 Examples: Minn Kota Endura C2 55, Haswing Cayman.

⚠️ Attention: When the engine is powered 15 hp Check the strength of the transom, which as standard may not withstand long loads, and it is recommended to strengthen it with an aluminum plate or replace it with a more reliable one.

Compare Windboat 47 with analogues

There are several boats on the market that are comparable to Windboat 47 Let's compare the key parameters:

Model	Length (m)	Max, engine power.	Load capacity (kg)	Price (from)
Windboat 47	4,7	15 hp	650	≈120 000 ₽
Wings 470	4,7	15 hp	600	≈130 000 ₽
Flagship 470	4,7	20 hp	700	≈150 000 ₽
Bark 480	4,8	15 hp	680	≈140 000 ₽
Aqua 470	4,7	10 hp	550	≈110 000 ₽

Windboat 47 compares favorably with competitors in terms of price and payload capacity – at a similar length, it is able to take on board 50-100 kg more than most analogues. However, if you need a power reserve, you should pay attention to it. Flagship 470 permissible 20 hp.

According to the owners, Windboat 47 It is better to behave on the wave due to the design of the bottom, while Wings 470 It's more maneuverable, but less stable in the side wind, and it depends on your priorities, speed or comfort.

Operation and care nuances

And Windboat 47 served a long time, you should adhere to several rules:

Storage:

• 📦 Keep the boat in. dry-placeaway from direct sunlight.
• 🧴 Periodically treat PVC specialty (for example, 303 Aerospace Protectant).
• 🔧 Get the air out of the cylinders on 20–30% with long-term storage.

2. Cleaning:

• 🧽 Wash the boat. freshwater After each exit to the salt water.
• 🧴 Use it. soft detergent No abrasives.
• 🚫 Avoid based cleaning products acetone - they destroy PVC.

Repair:

• 🩹 Small punctures (5 mm) can be sealed repair-pack from the set.
• 🔧 For major damages, use two-component (for example, Bostik 2402).
• ⚠️ Before bonding degrease alcohol or a special solvent.

Pay special attention granule: check the motor mounts regularly and tighten the bolts if necessary. If the transom starts to play, it needs to be reinforced with additional stiffness ribs.

Owner reviews: pros and cons in real operation

Analysis of reviews on forums and social networks shows that Windboat 47 It's in steady demand because of its reliability and maintainability, and this is what the owners say.

Positive feedback:

• 👍 "Great boat for your money! I bought it a year ago, and I haven't had a major puncture since. Tohatsu 9.8 speed up 28 km/h, the wave holds well.
• 👍 "Easy to transport. Gets in the trunk. Lada Largus. No problem. It's 15 minutes.
• 👍 "It's easy to repair. Once tore the balloon on the snag - sealed in an hour, and like new!

Negative reviews:

• 👎 "The stairs are flimsy. After six months of use, both broke down.
• 👎 "Low side. The water was pouring on the wave, I had to finish the drain.
• 👎 "The stitches are unstuck. After winter, I found that in a few places the PVC had gone away.

Many negative aspects are related to disadvantages of standard equipmentThey can be easily removed by themselves, like changing ladders or installing a drain valve. Windboat 47 receiver 4.2 out of 5 According to users, this is a high figure for a boat in this price segment.

What if the boat starts to flow at the seam?

If you find that air is oozing along the seam, first of all, degrease the leak site with alcohol. Bostik 2402 or Polyurethane glue And you can press the PVC tape tightly (you can use a patch from the remix set) and leave it under the press for 24 hours, and if it leaks a lot, you might need to take the seam apart and paste it again.

Upgrades and tuning Windboat 47

Many owners are upgrading Windboat 47To improve its performance, let's look at the most popular improvements.

Transnant reinforcement:

• 🔧 Installation aluminum-plate thickness 5-8 mm.
• 🔧 Replacement of the standard transanche with reinforced (e.g. from Flagship 470).

Improvement of driving performance:

• 🌊 Installation lease (Flat keel) for better access to glossing.
• 🛠 Additional bottom-layer to protect against abrasive.

Comfort:

• 🪑 Replacement of standard seats with high-backed.
• 🧵 Installation fishing-rod and organizer.

Safety:

• 🆘 Installation escape-way on the stern.
• 🔦 Installation light-emitting night fishing.

One of the most useful improvements is the installation discharge-valveThis will require:

1. Cut the hole in the bottom with a diameter 30-40 mm.
2. Install return-gate (for example, Rule 500GPH).
3. Seal out joints sea-sealer (for example, Sikaflex-291).

⚠️ Attention: When installing the redan or additional underbody linings, make sure they do not disturb the boat's balance. Incorrectly installed redan can impair handling on the wave.

FAQ: Frequent questions about Windboat 47

🔹 Do I need to register Windboat 47 with GIMS?

If you install a power motor up to 10.88 hp (8 kW)No registration required. 15 hp need to be boat registration certificate And get a checkup.

🔹 How many people can fit in a boat?

Officially, until 5 peoplebut comfortably 2–3 with equipment. When fully loaded (650 kg) the boat sinks deeper into the water, which impairs driving performance.

🔹 Which pump is best used for pumping?

It is suitable for regular use. pump-pump (for example, Bravo BP12For rare visits, there is enough and foot The key is not to pump the cylinders: optimal pressure. 0.2-0.25 bar.

🔹 Can I use a boat in the winter?

Yes, but with caution: PVC becomes brittle in the cold. ice-edge After you're out on the ice, dry the boat thoroughly to avoid icing the seams.

🔹 What is the average speed with a 9.9 hp engine?

With one person on board, 25-30 km/hAnd with full loading. 18–22 km/hSpeed depends on the weight, the current and the condition of the reservoir.