Choosing a swimming aid for fishing or outdoor activities on the water is always about finding a balance between cost, reliability and functionality. Yamaran 380It has been in stable demand for domestic water engines for several years. Universality This design allows you to use it both for quiet walks on small lakes, and for access to the open waters of Ladoga or Onega in pin weather.
Many owners pay attention to this model because of its dimensions, which perfectly fit the requirements of GIMS for registration of small craft without the need to obtain a license to drive (when installing an engine up to 10 hp). However, behind the external simplicity there are a number of design features that must be considered before buying. In this article, we will examine in detail what the boat is made of, how it behaves on the wave and whether it justifies its price in the current market conditions.
Structural features and materials of the bodyThe basis of durability of any inflatable vessel is the material from which its cylinders are made. Yamaran 380 five-layer reinforced PVC fabric with a density of 850 g / sq.m. This is a standard indicator for boats of the middle price segment, providing good resistance to abrasion and punctures. Reinforcing frameThe PVC, located between the layers of polyvinyl chloride, gives the cylinders the necessary rigidity, allowing you to withstand high pumping pressure.
It is important to note that the seams on the cylinders are made using hot gluing technology, which is a more reliable method compared to cold gluing, often found in cheap Chinese counterparts.
The design of the bottom also deserves attention, since it is she who determines the rigidity of the stroke.
In this model, a floorboards made of moisture-resistant plywood covered with a special snow-resistant net is used, which makes moving on the boat safe even in wet weather.
⚠️ Warning: Despite the high density of the fabric, avoid contact with cylinders with sharp stones or broken glass on the shore - mechanical damage to PVC will inevitably lead to etching of air and require repair.
Balloon anatomy and rigidity systemThe geometry of the cylinders directly affects how the boat will behave on the water. The diameter of the 380 cylinders is 45-48 cm (depending on the specific modification of the year of manufacture), which provides an excellent performance. loading capacity High sides protect passengers from splashing and swelling, which is especially true when driving against the current or wind.
In the nose is located inflatable kielsonIt runs along the entire bottom and is integrated into the design of the cylinders.
This element plays a key role: it not only gives the boat contours similar to the keel, but also serves as an additional protection of the bottom from impacts on underwater obstacles.
The presence of the kielson allows you to develop higher speeds without the risk of damaging the transom or bottom, since the impact load is distributed throughout the length of the structure.
The valve system is also designed for user convenience.
Used petal valves that allow you to quickly pump the boat with a high pressure pump and just as quickly to burn air when Assembly.
Technology of production of seams
The seams in the Yamaran boats are glued with two-component polyurethane glue at high temperature, which creates a monolithic compound stronger than the PVC material itself.
Deck and interior equipmentThe interior of the boat is organized with a focus on functionality. The deck, as mentioned earlier, is made of plywood floorboards. It takes a while to assemble the floor, but the result is worth it: you get a rigid, non-crashing base on which you can walk confidently in your shoes. Slate. fixed in special pockets and stops, which excludes its displacement during movement.
For storage of gear and personal belongings, special pockets sewn to the inside of the cylinders are provided.
There are usually two or three of them, and they are made of the same fabric as the boat itself, with drainage holes for water.
Also in the bow there is often a kunduk or space under the floorboard, which can be used to accommodate the anchor flap or additional equipment.
The transom part is reinforced with additional linings, which allows you to install motors with a capacity of up to 15-18 hp without the risk of deformation.
The trawl is made of moisture-resistant plywood and sheathed with plastic or covered with a special paint that protects from moisture and ultraviolet light.
☑️ Checking the completeness when buying
Driving and handlingHow he behaves. Yamaran 380 This is probably the most important question for any aqueous motor, because the boat is very stable because of its quilt design, it doesn't scour side to side when it's going in a straight line, which reduces driver fatigue, and at low and medium speeds, it goes gently, smoothing out small ripples.
When entering the planing with a 9.9 hp engine, the boat easily gets on the “skis” even with two passengers on board.
However, it is worth considering that the flat bottom of a solder boat (despite the keelson) can give tangible blows at a high wave, if full gas goes.
The optimal speed for comfortable movement on this model is 20-25 km / h.
Manipulability at corners is predictable, but sharp maneuvers at high speed are not recommended due to the risk of rollover, which is common for all inflatable soft-sided vessels.
Wind is an important factor: in side winds, the sailing of inflatable tubes can knock the boat off course, requiring constant adjustment.
Technical specifications of the model 380For those of you who like accurate numbers, we've created a summary table of the basic parameters. Yamaran 380 Note that the weight of the boat can vary slightly depending on the year of production and the thickness of the fabric used.
| Parameter | Meaning | Note |
|---|---|---|
| Total length | 380 cm | Including inflatable parts |
| general width | 156-160 cm | Maximum cylinder width |
| Diameter of the cylinder | 45-48 cm | Depends on the pumping pressure. |
| Load capacity | 650-700 kg | Considering the weight of the boat and equipment |
| Boat weight (with paioles) | 48-52 kg | Excluding engine and fuel |
Dimensions in packaged form allow you to transport the boat in the trunk of most station wagons or hatchbacks, if you fold the rear seats.
The package length is about 120-130 cm, which is the standard size for boats of this class.
Weight of 50 kg is essential for one person, so carrying to the water often requires a trolley-roller or the help of a partner.
Tip: Before a long parking in the sun, be sure to draw some of the air from the cylinders, since when heated, the pressure inside can grow to critical values and damage the seams.
Operation, maintenance and storageProper care of the PVC boat is the key to its long service, and after every fishing trip, especially if you have been swimming in salt water or water with a high content of silt, the boat should be washed with fresh water. Aggressive detergents You can't use a soft sponge and warm water, and you should keep the boat in a dry, ventilated room, away from the heating appliances.
It is not recommended to keep the boat inflated in conditions of temperature changes, for example, on an unheated balcony in winter.
This can lead to “fatigue” of the material and microcracks in the places of folds and seams.
Optimal temperature storage: from -20 to +40 degrees Celsius, but without sharp jumps.
Check the pressure in the cylinders regularly before going out on the water.
A sub-pumped boat is more vulnerable to damage, and a pumped boat can burst in the sun.
⚠️ Note: Do not use abrasive powders or solvents for cleaning transom and floorboards - they can damage the protective coating of the plywood, after which it will begin to absorb moisture and rot.
Summary and recommendationsYamaran 380 is a sturdy middle-class in the world of inflatable boats that offers good value for money. It is not without the disadvantages inherent in all floorboard boats (weight, assembly time), but completely compensates for their reliability and comfort on the water. If you are looking for a versatile vessel for fishing with a friend or family trips, this model will be a great choice.
The main advantage is the ability to install a sufficiently powerful engine, which makes the boat fast and maneuverable.
The design of cylinders with a keelson ensures safety and predictability of behavior on the water.
With careful attitude and timely maintenance, this boat will serve you for many years, delighting you with stable driving qualities.
Yamaran 380 is an ideal choice for those who appreciate the rigidity of the pitting floor and are willing to put up with a weight of about 50 kg for the sake of excellent seaworthiness and load capacity.
Can I use the Yamaran 380 in winter?
You can use PVC boats in winter, but with caution. The material in the cold swells and becomes more vulnerable to impacts. You need to use specialized frost-resistant valve lubricants and avoid sharp curvatures in subzero temperatures.
What is the optimal engine weight for this model?
Optimal is considered to be a motor weighing up to 35-40 kg (usually 9.9 - 15 hp). Heavy motors (20+ hp) can overload the transom and shift the center of gravity, worsening driving performance, although technically transom will withstand them.
Do I need to register a boat with GIMS?
Registration is not required if the weight of the outfit boat (hull + attachment) does not exceed 200 kg and the engine power is less than 8 kW (about 10.88 hp). Since the Yamaran 380 weighs about 50 kg, you can put the engine up to 10 hp and do not register the vessel.